The design of the fastening handles of interior doors. Installing a handle on an interior door with your own hands

Installing door handles with your own hands is a simple process, but it requires certain knowledge and accuracy when doing the work. In this review, we will look at the three most common types of pens and understand the advantages and disadvantages of each of the options. We need to choose the optimal solution and install it according to the guidelines below.

Currently, there is no shortage of pens, the choice is so large that it can be a problem to determine the most suitable option.

1. Stationary;
2. Push;
3. Swivel.

Stationary handles

The oldest type of product that has been used for thousands of years.

First, let's look at their main advantages:

• Simplicity. There are no elements in the design other than the handle itself and the mounts. Thanks to this, installing such options is much easier than any other. The set of door handles includes only handles and fasteners, which is also important, because you do not have to assemble an ingenious mechanism and figure out how to set it up and install it correctly;

• Reliability, due to the simplicity of the design and the absence of moving mechanisms in it, there is simply nothing to break in such products. The only problems you may encounter are damage to the coating over time or loosening of fasteners if the handle is pulled frequently. It is possible to break such a structure only if it is made of low-quality material;

• Classic look. Such handles belong to the classics, therefore they are widely used in the arrangement of the corresponding interiors. Very often they are made in a luxurious style and covered with compositions that imitate patina or precious metals.

Forged versions are also common, they can also be very, very skillful;

• Ease of installation. Anchoring door handle within the power of any person - you just need to determine the location of the products, align them relative to, after which the self-tapping screws that come with the kit are screwed in;

• Various manufacturing materials. You can purchase products made of steel, brass, bronze, aluminum, plastic and composite materials. Wood stands apart, very authentic and unusual handles are obtained from it, very often precious wood is used for their manufacture.

Of course, there are also disadvantages, the main ones are:

• No locking mechanism. To close such a door, you need to install either a spring latch or a latch, and this is not always convenient. That is why such products are used less often than others and are most often placed in country houses, baths and outbuildings;
• Small selection. Although the range of this product group is rather big, only a few types of pens are usually found on sale. Most often you have to buy suitable options under the order and wait for delivery for some time.

rotary knobs

This type of product is quite common, and its main feature is that the door opens by turning the outer part.

This is a fairly simple and convenient mechanism, let's analyze its main advantages:

Note! The round shape of the handles has several names -. The difference between them lies in the presence of a locking mechanism, which is activated by turning the handle itself to the left or right. The handle-button does not have it, therefore it belongs to stationary views.

• Interesting appearance . Most often, handles are spherical or cylindrical in shape and look good on doors. There are many options for execution, so picking up something for your doors is usually not difficult;
• Availability of original designs. They themselves are an adornment of any interior and can have a wide variety of colors or patterns on the surface - there are even crystal options, their price is high, but their appearance is luxurious;
• compactness- This option takes up little space and is well suited for limited space. In addition, the mechanism is also compact, which greatly simplifies its insertion into the door leaf;
• Safety. If you hit such a handle, then the likelihood of injury is low, unlike push options. Therefore, such products are often put by those who have small children.

Now let's deal with the disadvantages of rotary knobs:

• Low coverage reliability. Due to active use, the decorative layer begins to collapse, which worsens the appearance, and accessories for door handles are not sold separately, and you will either have to use peeled products or change them to new ones;

Advice! As practice shows, chrome-plated products are much more reliable options in gold and bronze. Keep this in mind when choosing a specific solution.

• Poor workmanship. Most of the products on the market are not very reliable and durable. Repairing door handles is not a pleasant occupation, and spare parts are not always available, especially if you have some unusual option. In order not to have problems, try to choose products from those manufacturers that are widely represented on the market, at least there will be no problems with repairs;

• Impossibility to install other types of handles. If you decide to put a rotary option, then keep in mind that during installation you will have to cut a large hole in the door leaf. After that, putting a lever or another option will not work, you will have to constantly put the same type of structure.

Push handles

This is without a doubt the most popular and widespread option, which is found literally everywhere. It consists of two L-shaped handles connected by a square, with which the door latch opens when pressed.

As for the main advantages, they are as follows:

• Ease of use - it is very easy to open and close the doors, and if the rotary options need to be moved by hand, then the push ones can also be opened with your elbow if your hands are busy. Most often, the handles are ergonomically shaped, which is also important, but to appreciate the convenience, it is better to buy products where there are showcases for door handles so that you can hold on to them;

• A huge range of products, you can find options for all kinds of colors and designs. You can decide for yourself which color of door handles to choose, which significantly expands the possibilities of decorating the room. There are budget options, and the middle segment of the premium product, everyone will find a suitable solution;

• Maintainability. Most often, the mechanisms are interchangeable, so there are usually no problems with repairs. Yes, and in terms of reliability, this option looks preferable to the one described above, since the lever unlocking system is more wear-resistant and durable.

It should be noted that such products are of two types:

1. Socket handles. Mounted on a small base, under them you can use different locking mechanisms. If a latch or lock is needed, then an additional socket is placed below, it has the same coating as the main element;

1. Handles on the bar are more often used on entrance structures, but there are also options for interior doors. In them, the base of the handle is a bar, in the lower part of which there is a keyhole or latch.

Of the minuses, one can only single out a more complicated installation process, since the work requires accuracy, and any errors can lead to damage to the door leaf.

Description of the installation process

Now let's figure out how to put the handles yourself. Two options will be considered - rotary and pressure structures. There is no point in disassembling stationary ones, everything is simple there - you determine the installation location, and screw it on.

Installation of rotary handles

To get started, you should stock up on everything you need.

Naturally, you need a set of door handles, the following tools will also be used:

• Feather drills;
• Drills for wood or metal;
• A hammer;
• Chisel;
• Screwdriver;
• Roulette, pencil and square;
• Drill;
• Wrench;
• Crown on wood.

Installation instructions for door handles of a rotary type look like this:

Installing lever handles

Now let's deal with this option. Naturally, the technology can be different, since the production of door handles is established in many countries and everywhere there are standards. We will analyze the most common option with a latch, which is great for interior doors.

Conclusion

Now you all know about the types of door handles and how to install them. As you can see, putting the handles is not as difficult as it seems at first glance. You must follow all the recommendations and do everything very carefully. The video in this article will help you understand the issue even better, watch it if you are going to do the work yourself.

Sold without accessories. You will have to purchase and install the door handle separately. The work is simple. Installation can be done independently, you only need a certain tool.

Products differ in the material of manufacture, design, working mechanism. Accessories are selected according to the style of the room, taking into account ease of use. By type of attachment are:

• Overhead. The fittings are simply screwed with self-tapping screws to the surface of the canvas.

• Mortise. Often come with a lock or latch. Mounting of accessories involves cutting a groove and drilling a through hole in the body.

All mortise models are divided into two types:

• Knobs. The fittings are equipped with a swivel mechanism that moves the latch. Usually the handle itself is made of a spherical or disc shape.

• Push models. The mechanism functions according to a similar principle, only to activate it, the handle must be pressed. Fittings complete with a lock are in demand for interior and exterior doors.

pressure Models are further divided into two types:

• Mechanism with handle and latch complete. Such models are inexpensive, but not durable. They quickly loosen and fail.

• The handle, latch, wrap and the mechanism itself (with a tongue or magnetic) are selected separately depending on preference. Such products are better and more reliable than the first option.

Common material metal alloys or aluminum are used for the production of fittings. Overhead models can be made of wood. For expensive canvases, stone and glass handles are produced. The cheapest option is plastic. Metal elements are chrome plated or nickel plated.

Products differ by type of castle. The simplest locking element is a latch. The lock can be locked with a key on one or both sides. In the first version with inside room key replaces the latch.

Required Tools

To install the handle on interior door with your own hands you will need the simplest carpentry tool:

• electric drill;
• nozzle crown with a diameter of 50 mm;
• pen drill with a diameter of 20–25 mm;
• pencil;
• screwdriver;
• a hammer;
• chisel.

The template for installing door handles, sold with the product, will help facilitate installation. If one was not in the package, it can be printed from the Internet. The template is a 1:1 scale diagram of the movement case. It is applied to the canvas to mark the groove and hole. If it is planned to install a large number of handles, a jig is cut out of wood for drilling.

How to install a door handle?

They determine the installation height of the handles on the interior doors according to their preference, but usually keep a distance of 0.9–1 m from the floor. The indicator may depend on the height of the people living in the house. To maintain the aesthetics, the handles of all canvases are placed at the same height.

They begin the installation of door handles on interior doors with markings, but first the canvas is lightly tapped. The sound determines the density. modern doors often go inside empty. wooden frame made only around the perimeter and jumpers installed. If the fittings fall into the void, then it is impossible to fix it.

The handle is being installed on the door removed from the hinges. If the canvas cannot be painlessly dismantled, then it is wedged in the open state. Each model has its own design features. Therefore, before inserting, it is important to read the attached instructions and take measurements. They will help you accurately select the drill nozzles according to the diameter.

Mounting the latch handle

They begin installing the latch handle on interior doors by choosing a full-bodied place and marking. Usually the manufacturer attaches the scheme. In its absence, manual marking is done simultaneously with the sidebar:

• First, a mark is placed from the edge of the canvas at a distance of 60 mm. At the end, a center line is drawn, the center is marked for the future hole.
• To make the front plate of the latch body flush with the wood, a nest 3 mm deep is selected with a chisel at the end of the door leaf.
• For further installation of the knob handle, they take an electric drill with a crown and drill a through hole in the canvas. It is important to be careful to avoid damaging the decorative coating of the canvas.
• A hole is drilled from the end of the sash at the marked center with a pen drill. Its depth and diameter is equal to the size of the latch body. It is impossible to drill deeper, as there is a risk of damage to the panel. The latch is inserted inside, fixed with two self-tapping screws.

• To install the knob, it is first disassembled. There is a technological hole on the side, inside of which there is a latch - a tongue. When pressed with a key, the handle can be easily removed.
• The next element is to remove the decorative trim. The outer half of the handle is inserted into the hole in the door, and on the other hand they put the inner half and both elements are bolted together. Now it remains to put in place the decorative trim and the handle itself.

• Continuation of the installation of the door handle with a latch provides for the fastening of the striker. The sash is completely closed and they try to mark on the boat the place where the tongue of the locking mechanism fits. According to the marking with a chisel, a recess is selected, a decorative pocket is inserted, a steel patch plate is fixed on top with self-tapping screws.

At the end of the work, the operability of the mechanism is checked.

Installing a handle with a lock

Installation of a door handle with a lock is complicated by gouging a large groove in the end of the leaf for the body of the locking mechanism. The work consists of the following:

• The lock is applied to the end surface of the canvas. Draw a pencil around the back of the body. According to the markings, holes are drilled with an electric drill, placing them as tightly as possible. The remaining jumpers are selected with a chisel. It is better to make a hole with a pen drill, and its diameter should be a couple of millimeters larger than the thickness of the body of the locking mechanism.
• A lock is inserted inside the groove. At the end of the sash, draw a contour of the front plate with a pencil, choose a recess under it with a chisel.
• Having attached a lock to the side surface of the canvas, mark the hole for the handles. Below, they designate and make a hole for the keyhole.
• The lock is installed inside the groove, fixed with screws. A metal square is inserted, decorative overlays are put on. Handles are put on the square. Each lining is fixed to the sash with self-tapping screws or through bolts, which depends on the model.
• With the door leaf closed, the boat is marked for the striker. After sampling the recess with a chisel, the plate is fixed with self-tapping screws.

After installing the lock, check its performance.

Installation of handles for sliding doors

To insert a handle into a sliding-type interior door, you only need a drill, a chisel and a screwdriver. You can simplify the task with a milling cutter. Typically, sliding door handles are oblong in shape. They consist of a plastic insert, on which a decorative overlay snaps into place.

The handle is installed on the compartment door as follows:

• The plastic insert is applied to the side surface of the sash. Outline with a pencil.
• Using a drill and a chisel or a milling cutter, a groove is selected. Its depth corresponds to the thickness of the liner. Usually 12-15 mm is sufficient.

• An insert is inserted inside the groove, fixed with self-tapping screws. The decorative overlay, which acts as a handle, is simply snapped on from above.
• A similar action is performed on the reverse side of the canvas. If the shape of the handle is round, the recess is selected with a pen drill. Hardware may come with a lock. For its tie-in, a groove is selected at the end of the sliding door, and a reciprocal bar is attached to the boat.

Mounting the handle with magnetic lock

To insert a handle into an interior door with a magnetic latch, perform the same steps as when inserting a conventional lock. For smooth snapping, you need to correctly install the reciprocal bar.

With the door closed on the boat, they try to accurately mark the upper and lower edges of the castle. A reciprocal bar is applied to the markup, a groove for the magnet is marked. A hole is made with a drill bit. A magnet is placed inside the groove. A reciprocal bar is screwed on top with self-tapping screws, without deepening it flush. If the plate is sunk into the sample, over time, the weakened magnet will no longer hold the canvas.

Installation of stationary handles

There are two types of stationary handles, but all of them are easily attached to the door. Overhead models are simply fixed with self-tapping screws to the surface of the canvas. For a through option, the door is drilled. A threaded pin is inserted through the hole and the handles are screwed on both sides.

Installation of fittings on the door leaf is within the power of each owner. It is important to initially correctly markup and understand the mechanism of the product.

Very often, when changing doors between rooms, the question arises before us - how to properly install a door handle with a lock? With the help of this article, you will be able to install a lock on an interior door quickly, and most importantly, correctly, avoiding the mistakes made by many inexperienced people. In fact, this is not a complicated process at all, it takes up to half an hour for an experienced master, but an inexperienced person in this matter can suffer for several hours.

In this article, we will consider the installation of the most common lock in design today. Such a castle consists of the following parts:

Lock mortising tools

For installation interior lock a minimum set of tools is required, most likely you already have some of them, but if you have to buy something, you will not incur large financial costs.

1. Roulette and pencil;
2. Screwdriver or drill;
3. Stationery knife;
4. Chisels for 10 and 20 mm;
5. Fountain drill or 23 mm forstner drill;
6. Drill 2 mm;
7. Crown for wood at 54 or 50 mm, depending on the thickness of the door;
8. Masking tape.

This is a list of the most optimal tools that you will need. Special kits for tie-in locks are sold, they are relatively inexpensive, but it will be even cheaper to buy everything separately. Often, such kits include a 22 mm spade drill, it also fits, but then you will have to expand the latch hole with a chisel.

Selection of holes for the handle mechanism of the lock

Like any installation process, the installation of a lock begins with markings. But before that, we will secure the door leaf from accidental damage. To do this, we seal the end and the plane of the door with masking tape at the intended location for the installation of the lock, this is a distance of approximately 90 to 110 cm from the floor. The glued masking tape will not only protect our door from damage, but it will also be much more convenient to mark it.

First of all, mark the height of the door handle with the lock. Most often, the handle is placed at a height of 1 m from the floor level. We measure this distance with a tape measure and put a mark on the plane of the door with a pencil.

When buying this type of lock, it always comes with a template for accurately marking the location of the holes. Cylinder lock mechanism different manufacturers may differ in diameter, so purchase a wood crown after buying a lock. If there is no template in your lock kit, you can print them from this article as pictures and use them when installing the lock.

Gently bend the template along the line of the door ledge and attach it to the end of the door. Depending on the thickness of the door leaf, with a sharp object (self-tapping screw or the tip of a pen drill), mark the centers of the holes according to the template from the end and on the plane of the door.

Using a screwdriver and a wood crown, drill a hole in the plane of the door.

Advice: when drilling, be careful not to drill through the entire door at once. When the pilot drill appears from the back of the door during drilling, stop and start drilling with a crown from the other side, so you will definitely avoid chips on the plane of the door leaf.

The next step is to drill a hole for the lock latch. According to the previously applied mark with a template on the end of the door, with a 23 mm pen drill, we drill a through hole to the previous one.

Keep the drill strictly perpendicular to the door, otherwise in the future the latch may become oblique and it will stick during operation.

The next step is to insert the latch into the end hole, align it with the edge of the door and trace with a pencil along the contour of the decorative frame. After that, we take out the latch and with the help of a clerical knife, along the drawn line, we make an incision of the upper layer of the door leaf. And only then with a chisel we choose a potai for the latch of the lock. The depth of sweat should be slightly less than the thickness of the latch frame, later, when you pull the latch with self-tapping screws, it will be pressed into the tree and become flush with the plane of the door.

Advice: Many beginners immediately start choosing a chisel under the latch, this is wrong, since the door leaf is covered with a film that can be damaged beyond the cut line with a chisel, so cut off the film first.

After selecting the groove, we insert the latch into place and first, with a 2 mm drill, having drilled holes for the screws, we pull the latch into place. If the latch enters the hole tightly, then with a chisel we cut the points of contact between the latch and the hole.

Let's move on to installing the handle. The assembly of the handle is made according to the instructions attached to it. When installing, pay attention to the location of the closing tongue on the handle, if any, it should be located inside the room.

On one of the cylinder mechanisms there is a swivel pin and taps for mounting screws. Remove the decorative rosette from the mechanism using the pin wrench from the kit and mount it in place, screw the second cylinder mechanism on the reverse side with screws.

When tightening the screws, do not overdo it - pinched cylinder mechanisms will not work as they should.

Install all parts of the handle in place according to the attached instructions, on which the work on mounting the handle is completed. In fact, this is done much easier than it seems, you can watch a video clip in which you will clearly see the whole process of installing the lock with your own hands.

Installing the counterpart of the lock

The last step in installing a door lock in an interior door will be the installation of a counterpart on the doorway.

Close the door and make two marks on the doorway, focusing on the width of the latch of the lock.

Measure the distance from the corner of the door to the beginning of the latch.

You should have the same distance from the edge doorway before the deepening of the counterpart. It is necessary to maintain this distance so that in the future the closed door does not go back and forth from the movement of air in the apartment and does not knock.

If the answer is required to be drowned in the door jamb, then we apply it in place and outline its outer and inner contour with a pencil. If it is not necessary to recess, then we outline only the inner contour. It all depends on the gap between the door and the jamb.

With a drill of a suitable diameter (it can also be a feather drill, if the hole then does not protrude beyond the answer), we drill a hole for the lock tongue and fasten the answer in place, having previously drilled holes for the screws with a 2 mm drill.

Do not forget to expand the holes for the screws to a depth of 2-3 mm, as there are protruding parts on the back of the answer in this place.

We install the answer in place by pulling it with self-tapping screws and try to close the door, if there is an extra backlash, we eliminate it by bending the tongue on the answer.

All the insertion of the lock into the interior door is fully completed, it remains only to clean up the accumulated debris and enjoy the new handles in the doors.

Inset lock with a larva

Very often a situation arises when it is required to install a lock on a door where there is already a handle. For this, any locks with a larva are suitable.

Such locks are rectangular shape and therefore the tapping process can seem complicated without the use of special tools. In fact, such locks crash quite easily and with minimum set tools. You can place them at your discretion - above or below the already installed handle.

Lock installation sequence:

Installing the counter part of the lock:

• On the open door we put forward the regel (retractable part of the lock) of the lock, that is, we close the lock with the key and leaning it against the doorway, we note what height we will have the counterpart, focusing on the edges of the crossbars;
• With a tape measure or square, we measure the distance from the edge of the door to the middle of the lock and transfer this distance to the jamb of the doorway;
• With a pen drill, we drill a series of holes according to the marking and then combine the resulting holes with a wood drill;
• Having previously fixed the counterpart on the jamb, we cut it along the contour with a clerical knife, and then with a chisel we select the sweat under the response;
• We install the counterpart in place and check the operation of the lock again.

Just as often, such locks come with handles, the sequence of inserting such a lock does not change, only the operation of drilling a hole for the handle is added.

Well, that's all, the lock is embedded!

Be sure to watch the video on the inset of the castle with the larva, perhaps in it you will notice some subtleties that you did not understand from the article.

If you have any questions, you can ask them in the comments. Good luck with the repair!

After the door is mounted, you need to install the door handle. Despite the simplicity of the product, it is not so easy to install it. In order not to spoil the product and the door, it is necessary to follow the rules and assembly sequence, because each variety is assembled and installed in its own way.

Types of handles

Handles can be divided into 2 types:

• stationary;
• working together with a lock or latch.

Stationary - the simplest. They do not have complex mechanisms, the handle is motionless and moves or scrolls only when the thread is loosened or something is broken. Do-it-yourself installation of such a handle on an interior door is quite simple. Most of them are attached with screws. For a more aesthetic look, make a pot for the self-tapping caps and insert decorative buttons that hide the heads. The through type of connection provides for the presence of a threaded stud. You just need to drill a through hole at a height of 80-90 cm, screw the pin into one handle, put it through the hole and screw the other half of the handle.

Installing a latch handle on interior doors is more difficult than harder design locking mechanism. They can be divided into 2 types:

• rotary;
• pressure.

The first type includes ball-shaped handles with the simplest latch. They are also called knobs.

The material and coating of the handles can be any: plastic, metal, wood, glass. The most common are metal with sputtering, chromium plating, nickel plating, etc. The strength and durability will depend on the material. Everyone can choose accessories that meet their needs and desires.

In order to understand how to install a door handle, there is no need to delve into the details - just consider the installation process.

Installation order

As an example, the installation of door handles with a latch is chosen. Round and oblong are installed in the same way.

To install we need:

• hand drill or screwdriver;
• wood crown with a diameter of 50 mm;
• drill for wood with a diameter of 22-25 mm;
• chisel;
• a hammer;
• pencil.

The standard for the height of the handle is 80-90 cm from the floor. Usually it is installed at the level of the belt. It must be borne in mind that for all doors you need to choose the same height, otherwise it will look ugly.

The height must be marked on the door leaf at the end and side. At the end, mark the center in order to subsequently drill a hole for the latch latch. To correctly mark the drilling location on the side of the door, measure the distance from the edge of the latch to the middle of the hole into which the square is inserted. Transfer this length to the side of the door.

After marking the centers, we proceed to drilling holes. To do this, you will need a drill, a thin drill (2-4 mm) and feather drills (22 and 25 mm). We need a thin drill in order to set the guide. When drilling with a pen drill through the exit side, chips are formed. To avoid this, it is enough to make a hole with a pen half the thickness of the door, and then start drilling from the back. To do this, we need to make a guide with a thin drill. The first hole is a side hole with a diameter of 25 mm, the second is made on the side with a diameter of 22 mm.

For those models that have 3 additional screws in the kit for attaching the base to the door leaf, it is not necessary to drill a large hole with a crown. It is enough to make a hole for the “square” with a pen drill with a diameter of about 12 mm and holes for the tightening bolts. This design will last longer.

Now mark and make a sweat under the latch. To do this, insert the latch into the end and circle the outline of the bar. Then you need to choose a groove for the bar. Make it better with a milling machine. If one is not available, you can get by with a chisel. It is enough to go deep into the thickness of the bar.

Now installing a handle on an interior door will not be a big deal. All that remains is to assemble the doorknob inside the door leaf. To do this, clean the hole from dust and chips, insert the latch and fix it with self-tapping screws. However, you should not be zealous and clamp it too tight, because otherwise it can jam.

Now thread the square through the latch hole. Then put on the handle. Both left and right handles are included, so make sure you insert them correctly before screwing them on. After installing the handle with a lock, screw the handle with three screws to the door leaf.

Also mount the second handle. After assembly, check whether everything works correctly, whether the latch moves, whether it slides in to the end and whether it wedges. At the end, decorative caps are screwed on to hide the fasteners. On the bottom of the handle, there is usually a hidden hex screw to secure the caps.

If you have a round pen, insert a rod into the hole. It has grooves on both sides. There are also grooves on the handle that should match with each other. Put on and press until it clicks.

Lever handles can be mounted on both left and right doors. To change, you need to remove the cylinder mechanism and the locking mechanism from the handle body and swap them in accordance with the side of the door opening.

Strike plate and recess for the lock

Installation of the door handle on the interior door is completed. It remains to make only the final touch, namely, to cut the mating part of the latch into the hole. The first step is to mark the center of the latch. To do this, close the doors not too tightly and draw a pencil at the required level. You can also close the door tightly and open and close the latch several times to leave marks. Now in the middle of the loot, select the groove. It shouldn't be deep. Measure the latch length at the very great place and choose 1-2mm smaller.

Under the lock, the groove is selected deeper and larger. It all depends on the castle itself. Sometimes the kit may include a plastic overlay in the groove - it must be inserted before the bar is fixed.

A decorative strip is attached over the groove. There is no need to cut it flush. It is enough to fasten with self-tapping screws or nail with carnations. It remains only to check if everything works correctly. This completes the installation of handles on interior doors.

Handles with a lock are installed according to the same principle. The difference will be only in the diameter of the end hole.

Mounting on sliding doors

When installing handles for sliding doors, you need to have a drill, feather drills, simple drills and a milling machine with a cutter in the form of a cylinder. The handle is an oblong tab that goes deep into the door. As in the previous case, you need to decide on the height of the location. Then circle the plastic liner with a pencil on the door leaf.

Using a drill with a 25 mm spade bit, drill holes to a depth of 13 mm very close together inside the contour. Then select everything with a chisel or chisel. If you have a milling machine, do it with a milling cutter. So the hole will be neater. Now insert a plastic insert into the hole and fix it with self-tapping screws or screws. Put a pad on it and press until it clicks.

If you have a round handle for sliding doors, then your task is greatly simplified. You only need to make a hole with a drill of the required diameter. Further, everything is the same as with an oblong handle. On the sliding doors you can also install a lock or end grip.

Despite the apparent simplicity, installing a handle on an interior door can be tricky. And if you are not sure about anything, it is better to contact specialists or someone who has experience in such matters. After all, a mistake can ruin your door or handle.

This article will describe the work being done on installing latch handles on interior doors, which are by far the most popular in use.

The latch handle has the following design.

The visible part of the handle can be perfect different kind and it might look like this:

Or this way:

All such latch handles basically consist of two parts, from the handle:

and latch:

Each of these parts of the latch handle requires a separate cut into the canvas.

There are different types of latches on sale, with a latch that have an additional mechanism installed in the handle itself, which allows the door to be locked from the inside, and from the outside on the handle there is a mask for a key that allows the door to be locked. Also, such handles are available and without a latch they are not locked. Latch handles from different manufacturers have different design features that in no way can affect the process of inserting into the web. The weight of such handles has a latch on the inside, so the whole process of installing the latch handle is the same for everyone.

Therefore, if there are any differences, then because of this you should not doubt much and you should gain courage and begin to work. And you should start with the preparation of tools.

To do this, we need tools to work.

• Screwdriver or hand drill.
• Crown with a diameter of 50 mm on wood.
• Reduced the size of 23-24mm on wood.
• Pencil
• Chisel
• A hammer

In order to maximally facilitate and speed up the process of installing the latch handle in the door leaf, you can purchase a special kit in specialized stores.

Starting to install the latch

1. In order to proceed with the installation, it is necessary to make markings for drilling from the beginning on the canvas. If you purchased a special set for inserting such a latch handle, then this set already has a marking scheme.

If you do not have such a scheme, then the markup can be done manually. Why, at a distance of about 1 meter from the bottom of the door leaf, we make a mark, then along this mark from the edge of the leaf we measure 60 mm and make a mark for drilling, as shown in the photo.

2. On the side of the door leaf, we also find the center and make a mark for drilling.

3. Next, we take a chisel and for the front plate of the latch on the door leaf we hollow out a recess equal to 3mm. It is better to drill the center of the thickness of the door leaf with a slightly thin drill, so that later you do not have to make markings again.

4. With a crown with a diameter of 50 mm, we make a through hole. It is better to make a through hole on the door leaf on both sides so as not to damage the leaf.

5. As a result of the manipulations done, we get a hole.

7. As a result, we get several holes on the door leaf.

8. Insert the latch into the hole on the side of the door leaf and screw it.

With the help of a special key that should be included in the kit or any thin and flat object.

We press in the hole on the tongue.

and remove the handle.

10. After the handle, remove the decorative cap and expose the mounting holes.

12. We insert the other half, after which we tighten both halves of the handle with the screws that come with the kit.

14. We cover the door leaf and mark the place where the tongue touches the jamb, in this place we hollow out a recess for the latch tongue.

15. A plastic pocket must be installed in the hollowed out recess.

16. Install a metal lining on top of the plastic pocket and screw it on.

As a result of the work carried out door latch handle installed, the door is now ready for use.

Similar articles

At what height should a door handle be installed?

The handle is an important part of the "pie" of the interior door, because the comfort and ease of use of the entire structure will directly depend on the correct installation and choice of it, and the Dverka interior door hypermarket will help with this. Most manufacturers offer doors for installation with existing handles and other accessories included.

The height of the handle in this case is standard and, in accordance with GOST, is 100 cm from the floor.

If the handle is not installed, models may or may not have grooves for attaching it. In the second case, there is a special bar in the area of ​​​​the intended fixation, which allows you to install handles and a lock quickly and easily.

Here the height is determined independently, but the “limit” of indentation up and down should not exceed 10 cm.

A height of 100 cm is focused on a person with a height of 170 cm. But given that this parameter can vary significantly, the best option is to purchase a door without fittings and marked grooves and fix the handle in the place that the best way will suit everyone living in the house.

Peculiarities

To finally determine the appropriate height, you can follow the following rules:

• By the wrist. It is necessary to come close to the door, lower your hands along the body. At the level of the wrist, make a mark and step back up 20 cm.

  The resulting height is optimal for the person who took the measurements.

• Elbow. Everything is simpler here: with a close approach to the door, the notch should be made at the level of the elbow.

If you use both methods at the same time, the result should be approximately the same in the end.

There is no need to make such measurements for each door. It is enough to set a mark on one, measure the resulting distance and measure it on other interior doors of the house.

Pen in the child's room

The height obtained as a result of the above measurements by an adult is not suitable for children - the child will not reach the handle.

On the other hand, an additional groove will negatively affect the aesthetic appearance of the structure. The best option– use the push mechanism of the handle and attach a cord to it.

The child pulls the cord - the door opens without difficulty. When the children grow to a suitable height, the lace is untied.

It is worth considering that the correct height of the handle is not the only important point.

Installing the mortise door handle

The element itself must be of high quality and reliable, easy to press. Especially for children. It is worth checking this point during the purchase. Only in total with the quality of the product correct fastening will provide convenience of use of an interroom door.

Expert of the hypermarket of interior doors "Dverka" http://www.dverkadverka.ru Zakirova Victoria

How was the handle fixed on the front door?

All handles on the door, during operation, have the property of stunning and breaking.

Their repair is not so strange, and it will also apply to those who take it for the first time.

There are two ways to fasten the door: screw, through the recess and screws - self-tapping screws. Therefore, repairs cannot be expensive, and it does not require huge efforts to use them.

What tool should I stick to before I start repairing a pen?

First you need to buy a set of screwdrivers or screwdrivers and bits.

By the way, it will be much more convenient and faster to make fasteners.

You will also need a set of screws.

Fixing a broken handle attached to a fork

By connecting two equal parts of the handle on both sides of the door.

This applies to spherical or conical products.

For types presented by the carrier, the elements are installed separately. This means that half is broken, then it is repaired, and the other is in place.

The handle is then removed when the door is opened, holding the hand halfway and the other in the hole.

All design details must be entered manually.

The handle half then detaches and gets the fork set to the desired length.

How to install a latch door handle

In the same way, the whole structure turns back, here it is clean without a special tool.

Technical repair mechanism fixed in the form of brackets

In this case, you will need to buy a screwdriver or screwdriver. It should be noted that transverse bolts are better and stronger than straight ones.

The door handle is moved to cover the old grooves. Then, on the opposite side, two pairs of bolts are attached to the new holes.

Press firmly so you don't have to slide.

The top parts are also installed with screws - screws with drilling new gutters. The overlay can be attached as a square or a diamond. At the end of the work, the application is fixed.

Characteristics of the replacement of small parts parts

When replacing the spring part, the new part is strongly compressed from above, the veneer facing is installed, the veneer ring is attached and connected to the screwdriver.

Then, a delicate screwing of the rotating mechanism is performed, followed by the introduction of a spring element into it.

The button is turned by the key.

In cases where cake repairs have not been successful, it is much easier and cheaper to buy a new product.

home »Inside» How to open a door lock without a key

How to open an interior door lock without a key

Sometimes it happens that the inner door is closed and the key is missing.

You do not want to break the door leaf, because it is quite expensive, and calling the master will additional element costs. So, how to quickly and safely open the door without a key to the design itself?

For what reason can the doors be extinguished?

Internal door lock

Before you start opening the neck structure right away, you must state the reason why it was destroyed.

As a rule, this situation can arise for the following reasons:

• The lock in the handle is simply stuck or it has turned off.
• The latch is locked.
• The jammed tab located in the locking mechanism is stuck.
• On the other hand, there was a key in the cavity, which does not allow opening the lock.

If you want to pinpoint the cause, you need to use a wide screwdriver.

With the help in different places, the door leaf rises. You need to pull it out a little, and then it becomes clear where it is. Once you find an error, you can fix it.

Defective latch - what to do?

Typically, bolt failure causes unauthorized door locking.

This item may not move completely. Even when you press the pen all the time, the tongue keeps running out. If the door is too attached to the frame or slammed shut, they can no longer open.

If so, you can do the following:

1. Using a simple screwdriver or other hard object, gently squeeze the design fabric out of the box and gently lift it up while doing so.
2. In addition, to eliminate the possibility of such situations in the future, it is not superfluous if you want to spin the lever and see what is wrong with the language.
3. In case of need and option, it is better to replace the wrong product with a new one.

The language was not successful

There is also a situation where door structure a door that is locked will not open after repeated use.

Even if the round handle is not equipped with an additional latch, but the lock cannot be opened in the usual way, the tongue is most likely the cause of the failure.

To solve this problem, you can use a sharp tool that easily goes into the gap between the box and the door.

Then, to open the interior door lock without a key, you must follow the steps shown in:

1. Carefully place a ruler in a slot, plastic card, office material, or regular knife.

   Orientation to the part of the door on which the door handle is installed.

2. The tool used to open the tool should be slightly tilted and pressed down.

   How to install a handle on an inner door: Photo.

   It needs to be pushed so that it can come into contact with the cut part of the tongue.

3. Tilt a knife or other improvised device towards the door leaf while the tongue is completely hidden in the lock. During the implementation of such measures, the handle must be in the lowered position than in the figure, and the wing must be extended in the direction in which it normally opens.

If you follow all the above rules, the keyless door will open effortlessly.

Locks on the inner door: their main functions

Before opening a doorknob without a key, it will not be superfluous if you find out what functions such mechanisms have.

Only with everyone necessary knowledge and skills to solve this problem will be much easier:

• Modern manufacturers could not ignore unauthorized stagnation in the doors. That's why they created a special door lock that has a lock on one side and a special opening page (button) on the back.
• If the moment when the door needs to be urgently opened without using a key, it is enough to insert a hard rigid object (for example, an anchor) into the hole to open the mechanism.
• If there are doors with a glass frame, then in the case of a ridge, they can be carefully removed and entered into the room.

The situation could be big.

But if you can’t deal with the blocked lock yourself, it’s better to call a professional master who will solve the problem in a matter of minutes.

Add a comment

Installing a handle in an interior door with your own hands - instructions on how to install a handle

Interior doors and accessories for them, including handles, are sold separately.

Accordingly, there are no holes for installing handles in the interior door. This happens for the reason that although the handles are standardized, they are still different in design and installation dimensions. Here you can do it in two ways, either call a carpenter, or install the handles on the interior door with your own hands.

So, we install the knob-knob in the interior door. This is the most common type of handles, in my opinion, the most suitable and convenient for interior doors.

Before proceeding with the installation of handles, it is advisable to remove the door from the hinges.

If there is no one to help you, then you can not shoot. But you should prepare a chair or stool so that you can fix the door, i.e.

she became immobile.

To install the handles, you will need a drill, a spade bit, a ruler (preferably a square), a hammer, a chisel and a hole saw for large holes (see photo).

photo is red).

Fig.1. To install handles in an interior door, you will need the simplest tool that every home has: a drill or a screwdriver, a chisel, a feather drill with a diameter of 23 mm or a Forstner drill, a wood crown with a diameter of 54 mm.

First of all, we determine the installation location, or rather, the installation height of the handles.

There are no strict restrictions in this regard. Typically, the height of the handle from the floor ranges from 1 to 1.2 meters. This height is sufficient for both adults and children.

They are different for different pens. In addition, they depend on the thickness of the interior door.

Also in the instructions, as a rule, there is a template for installing handles, where all geometric parameters are indicated. We will be mainly interested in the dimensions of the holes for the pawl, the handle itself and their relative position. The diameter of the feather drill and crown depends on these dimensions.

Therefore, the necessary tool must be bought after buying pens.

It is important to note that the drill and crown must be purchased with a diameter equal to the diameter of the hole in the instructions for installing the handles. If you use a larger tool, then it is likely that the decorative overlay will not close the hole. If it's smaller, then the handle just won't fit. At the same time, remaking holes for a larger size is very laborious and problematic.

Much easier and faster to do everything right at once.

Now you can directly proceed to install the handle in the interior door. For this, holes are marked for the handle itself and the dog. For these purposes, it is convenient to use a ruler as in the photo.

Fig.2. Relative to the end of the door, the handle can be displaced by a distance of 60 - 70 mm.

At this distance, mark the place for the hole for installing the handle.

Fig.3. First, drill a hole for the handle.

To do without burrs and chips on the door, proceed as follows. First, a hole is drilled with a drill with a diameter of 5-6 mm. Then, with a crown, an incision is made on one side of the door with a depth of at least 5-10 mm. After that, a hole is drilled with a crown on the other side of the door.

Fig.4. At the end of the door, at a height where the center of the hole for the handle, the center of the hole for the latch is marked, and a hole is made using a feather drill.

The latch has a platform 2-3 mm thick. To ensure that the door closes well under the platform, a groove is cut with a chisel. It is convenient to first drill a hole, then insert the latch and mark the groove along it, and then cut it out with a chisel.

After the holes are ready, insert the dog and circle it with a pencil.

And with the help of a chisel we make a groove. This groove is necessary so that the pawl platform is flush with the door and does not interfere with opening and closing.

Fig.5. The installation of the handle begins with the installation of the latch. It is inserted into the groove and secured with screws that come with the handle.

Wrap the screws carefully and do not break the notch for the screwdriver. To simplify screwing, you can pre-drill holes for self-tapping screws with a drill with a diameter of 3-4 mm.

Also, this groove can be made using a milling cutter. But for this you need to pre-make a template, which is not advisable for a “one-time” installation of handles.

After the preparation is completed, install the handle on the door and wrap the screws.

Fig.6. The last step is to install the handle mechanism.

One half of the handle is installed in the latch groove. The halves of the handle are connected with screws.

Installing a door handle-lock in an interior door

It is important not to overtighten the screws, otherwise the handle may wedge.

As can be seen from the description, the installation of handles in an interior door is very simple. It is important not to rush and make the right markup. After that, holes for installation are made with special drills, a groove for the latch is cut out, and the handle is installed in place.

On average, the installation of handles takes about 20-30 minutes.

Home cosmetics

Install the handle on the inner door with your own hands

It is hard to imagine how to use an interior door without such a mandatory attribute as a handle.

At first glance, its installation can be complicated. However, with a serious approach to the task, you can independently manage the availability of the necessary tools and materials and the proper organization of work with this task. In the presented material, let's see how the handle is installed on the inner door.

Handle types

There are several types of cranks that are suitable for insertion into an inner door:

• rotary;
• with pressure mechanism;
• without locking mechanism.

Stationary handles, which do not have mechanical operation, allow the door to be opened by pulling.

As far as pressure systems are concerned, these shutters are made in the form of a lever. In the process of pressing such a handle, the lock tongue moves inward, which allows you to open the door.

What is an oval handle door handle? Installing this system allows you to open the door without pressing the handle. Due to the circular shape of the handle, the operation is performed by turning the handle. The design can be equipped with a lock button that allows you to lock the language of the lock language.

Thus, the door can be locked from the inside.

Tools and materials

What does the installation of handles on the inner door require? Self-assembly may require the following tools:

• Measuring measuring tape;
• pencil;
• Manual or electric drill with a pen-shaped nozzle;
• screwdriver;
• chisel for woodworking;
• a hammer.

Interior door handle height

Before inserting a lock into an interior door, you must determine the optimal location for installing the handle.

To do this, it is enough to simulate the opening of the door in order to consider what height is most suitable for each individual user. As practice shows, right decision is to place the handle on the inner door at a distance of at least 1 meter from the floor plane. The presented images are optimal for both adults and children.

Cutting holes for handle

After you find necessary tools and have determined the location of the building, you can go directly to creating a hole for installing the mechanism.

First, mark the height of the future handle on the plane of the door and its end. This is necessary to determine the exact location where the hole will be punched with the double sided drill bit.

In order not to interfere with the calculations, it is enough to take a blocking mechanism, and then, using a tape measure, we measure the distance from his eye to the visible edge.

The parameter must be marked at the pre-selected height on the door leaf. As soon as the appropriate marking appears, you can continue to select the appropriate drill material.

At the end of the holes you need the diameter on the plane and at the end of the door leaf, here you need to attach the opposite parts of the handle structure.

If the thickness of the plane does not allow installation, excess wood should be removed with a chisel. Then you need to scrape the fabric on both sides until the handle engages.

Bolt Assembly

After completing the previous work, the latch should be installed in the prepared hole. Installing doorknob handles on an interior door involves attaching it to the door leaf in an open hole using fasteners that are attached to the product kit.

It is appropriate to work with a screwdriver.

How to install a handle on an interior door

However, in the absence of the latter, you can use a regular screwdriver.

After strengthening the key part of the structure, it includes a core for a long time, which is reinforced with a screw. In order not to have problems with the base assembly, the key must be inserted in advance by moving the mechanism lock mechanism to the closed position. Only then should the screw be tightened.

Installing a door handle on an interior door

Direct insertion of the handle into the pre-assembled structure is the simplest work step.

It is enough to insert a square rod into the corresponding hole of the locking mechanism.

The next step is to secure the handle with a buckle to one side of the door. To do this, you can use self-tapping screws or use zip ties. Once the first handle has been successfully assembled, similar operations must be carried out on the other part of the structure, which must be installed on the back side of the door leaf.

This will establish a connection between the two elements of the system.

Installing the keypad insert in the door frame

In order to install the handle on an interior door, it is considered ideal, it is necessary to make an appropriate hole to enter the locking part of the lock in the door frame.

Do not use calculation errors that allow you to use toothpaste on the tab along the vertical edge. When the door leaf is closed and the handle is released, the blocking element is connected to a part of the box.

The remaining toothpaste label will tell you where to make the hole under your tongue.

Using the method described above is the best solution to determine the correct position of the panel. Experts also resort to this causality.

The formed imprint from the protruding tongue of the neck should guide a stable outline with a pencil. Then use a drill and chisel to enter the hole in the cork, then a metal plate with a hole.

In advance, you also need to place holes for fasteners in order to secure the plate to the door of the door.

When you have created all the necessary holes, it is enough to fix the plate in the appropriate section. In order to fit snugly on the door lid, the metal element must be screwed tightly to the wood surface.

In the end

Therefore, we looked at how the handle is installed on the inner door.

This material provides an example of how to cut a simple mechanism into a wooden plan. Now you have enough knowledge to solve your problem on your own, without resorting to external help.