Glass replacement in interior doors. Types of glass and options for replacing, tips on how to disassemble and install in an interior door Replacing glass in an interior door

The use of glasses in interior door is a popular technique in interior design. Glasses add airiness and lightness to the room, increase daylight and they just look good. But since glass is very fragile construction material, it is not uncommon for one part or all of the glass to be replaced. Broken glass cannot be left in the door, in addition to reduced aesthetics, it can be dangerous if the glass falls out completely or partially. Replacing the glass in the interior door with your own hands is not difficult, you will need care, accuracy and minimum set tools.

Types of glass for interior doors

In many ways, working with glass depends on the type of glass that you have chosen for installation in the interior door. The most common are 3 types, the features of each must be taken into account while working with it.

Ordinary glass. The advantages of the material include affordable price, work with glass does not require special knowledge and skills. But after fixing ordinary glass, additional finishing will be required, which entails an increase in costs. Buy either impact-resistant glass or cover it with a special film that prevents the glass from falling apart in the event of an impact - these secrets are also associated with an increase in the price of glass.

Decorative glass. In installation, decorative glass is as simple as the previous version. The choice of various patterns and types of decor will not leave indifferent the most whimsical buyer, everyone will find glass that will fit into his ideas about the future piece of furniture. Among the shortcomings, one can single out a rather high cost per unit of material, as well as difficulties in selecting new glass if replacement is necessary.
Organic glass. Plexiglas is not quite a derivative state of glass, the material is close to plastic in terms of characteristic qualities and operation. And this is both a plus and a minus of the material. The advantage of organic glass is its strength; it is not easy to break such an insert. The disadvantage of organic glass is the gradual change in appearance, over time it becomes cloudy. To avoid this, it is necessary to cover the plexiglass with a special composition in a timely manner.

Glass replacement tools

So that nothing distracts you during work, prepare in advance the materials and tools that you may need in the process.

Selected replacement glass, right size, processed along the edges, safe to work with.
Gloves to protect hands from cuts. Thin garden gloves will not work, they will not save you from sharp glass in case the material falls and breaks, pick up strong special clothes.
From the tools you will need a chisel and a furniture hammer
Sealing paper will be needed to fit the glass to the size of the desired groove.
Prepare silicone to firmly fix the glass in the doorway.
Do not remove the broom and dustpan far away, sweep regularly during work to prevent cuts and splinters.

Glass replacement step by step

Replacing glass in an interior door in stages consists of several sequential procedures.

Remove the door from its hinges, put it on the floor, on flat surface. Place a thick material under the door so as not to damage the canvas and the flooring. Make sure the door is firmly in place, it should not wobble or ride under you on the floor.
Using a chisel and hammer, loosen and carefully remove the glazing beads holding the glass in place. Carefully, using gloves, remove the glass fragments from the opening, check that there is no glass left in the door. Sweep the work surface.
Remove the lining, sealant residues from the opening. When replacing glass, these compounds will have to be replaced with new ones. Take advantage of the fine fraction.

Apply silicone around the perimeter of the opening. Use a spray gun for even distribution. Pull the protective gasket over the glass, install the glass in the opening. Apply a second layer of silicone, only on the other side of the glass.
Install the fixing glazing beads in their places, nail them with thin carnations. Let the silicone dry for a few hours, then hang the door on its hinges. Job completed!

Replacing the glass yourself is easy, this step-by-step instruction will help you get things right. The main thing is to responsibly approach safety and the choice of new glass so that the result pleases you for a long time.

Completed over
10000 orders

We ship for free
measurer

We change glasses in one
visit of the master

Broken glass door interferes with privacy or spoils the aesthetic appeal of the room? Fast and high-quality replacement of glass in an interior door is a service that Labrem-Service is pleased to offer. At the same time, you can call the master at home in Moscow for free to take measurements, or you can independently specify the parameters of the canvas for further prompt delivery and installation.

Interior doors with glass inserts are particularly beautiful. Thanks to them, the room provides natural light and a unique style. At the same time, inaccurate handling can lead to a violation of the integrity of the fragile part of the structure. Repair of an interior door with glass replacement is most often required as a result of carelessness of children and after all kinds of feasts. Often, the influence of a draft also leads to a breakdown.

Modern technology has greatly expanded the design options for decorative details. If damaged, the features of the form can significantly complicate or even make it impossible to restore their aesthetic beauty with their own hands. In this case, it is recommended to without fail seek help from specialists.

Replacing broken glass in an interior door requires a set of works, the amount of which depends on the method of inserting the worn-out element. In a normal situation, this process is much easier than in the case of wardrobes or other furniture. So, first you should buy glass for an interior door, after which you need to carry out the following operations:

glass dismantling
measurement of a new element, which should be 1-2 mm less than its bed on each side
cleaning the surfaces of the grooves of the frame folds
application with a gun of silicone sealant with a layer of about 3 mm
installation work: pressing the wooden frame, re-applying sealant around the perimeter, fixing with glazing beads using nails or screws

Glass installation and related repair of products is carried out by our specialists in accordance with all modern quality standards:

We carry out work of any complexity, regardless of the type of door (kitchen, balcony, sliding) and its material (plastic, aluminum, wood), with or without illumination
You can insert glass into an interior door in Moscow both at home and in the company's workshop - the price does not depend on the chosen cooperation option: we offer a free visit of the glazier
At the request of the client, showcase, stained glass, mirror, multi-layer, hardened, reinforced, patterned or colored canvas can be used.
We carry out related door repairs at no extra charge
Possibility of delivery of fully prepared material in the case when glass insertion into the door will be carried out by hand
We provide a one-year warranty on all services provided.

Door glass replacement examples

Application for interior door repair

The appeal process includes the following steps:

Operator call: the essence of the problem is clarified (it is urgent to replace the broken glass in balcony door). Based on the results of the conversation, the operator will calculate and agree with you the cost.
Taking measurements: if necessary, the operator will send a specialist to take measurements. Departure of the master - a free service.
Installation: promptly and in the shortest possible time, the master glazier will prepare glass for interior doors (cutting, tempering, drawing and delivery) and make repairs.

Just three steps - and the repair of a door with a glass insert ceases to be a problem for you. Do not postpone the decision indefinitely - trust the experts.

Contacting Labrem-Service is a guarantee of confidence and peace of mind. Do right choice now!

Free departure of the measurer

Replacing glass in an interior door is not considered a particularly difficult task, but it must be done accurately and accurately. A fragile insert requires skills in handling the material and appropriate tools, so it is better to order cutting from specialists. Trading construction organizations provide such services directly when buying glass decor.

Glass inserts are most often changed for the following reasons:

Broken glass must be removed, even if it did not fall out. A sudden movement when closing the curtain will lead to possible injury to people.
The aging of decorative inserts is reflected in their appearance and also often leads to replacement.
Installing glass doors in your living room is an easy way to freshen up your interior. The repair option includes only the replacement of glass in the canvas or changing the size of the frame.
The glass insert may be accidentally soiled or scratched. You can replace the glass if it's easier than putting it in order.

preliminary stage

To repair a damaged door with a glass panel, you need to preparatory work. Before installing a new insert:

remove protruding fragments from the frame (most often they are easy to remove with little effort);
remove the canvas from the hinges and lay it on a flat surface;
inspect the door and try to determine the method of mounting the insert;
if the glass is not broken, then dismantle it.

In old apartments, glass was inserted into the door frame using putty. To repair interior doors and replace broken glass you need to pry off the bead holding the insert with a knife or screwdriver. After that, pull out the nails with pliers, remove the glass part and clean the opening from the remnants of paint and putty.

To work, you need to prepare tools:

glass cutter;
a hammer;
small nails;
silicone sealant.

It is often necessary to replace the glazing beads. You can buy them at the hardware store, in the lumber department.

Kinds

Doors are glazed with different types material:

transparent - often complemented by pasting with decorative films with drawings imitating stained glass;
matte - rarely required additional finishing;
with a pattern, corrugated and stained glass - are decorative species glass, it is better to entrust their cutting to specialists;
tinted or mirrored.

Material selection

Frosted or corrugated glass is used where the view of the room from the outside is undesirable: in the bathroom, bathroom, bedroom. These types of material are thicker than transparent window glass: it reaches 4-6 mm. House master not always be able to cope with cutting on their own. Therefore, after dismantling the old glass, it is recommended to measure the opening for insertion and order a replacement in the workshop of a construction company.

For the living room, decorative glass for doors is more often selected: with an engraved pattern, made using complex technology and surface treatment with a sandblasting unit, stained glass, consisting of colored pieces connected together. If desired, you can use both corrugated and frosted glass, if the interior design is not particularly luxurious or is made in a minimalist style.

Both transparent and any other can be installed in the kitchen. A budget option is a simple window glass pasted over with a film, or decorative curtains on a glazed structure.

Options to replace

If it is not possible to quickly insert decorative glass into the door instead of the broken one, there is an option to replace it with other materials. For temporary insertion, you can use:

plywood or fiberboard, pasted over with a film that fits the veneered surface of the canvas;
plexiglass ( monolithic polycarbonate);
window glass with stained glass film.

These materials are not the best decor for the door, so in the future you will have to make repairs again and insert new glass into the opening.

How to replace glass in an interior door

In economy class doors, the insert is removed and installed from above, through a special groove. Silicone sealant serves as a sealant: do not forget to clean the frame well from its remnants. Before replacing the glass part, you need to find out its dimensions.

Glass in inexpensive models has a rectangular shape, so it is enough to determine the dimensions of the glass opening in terms of width and length. When taking measurements, it is important not to forget about the allowances that are needed to fasten the insert in the grooves. Measuring the allowance is simple: slide the ruler into the groove. Add the resulting value to the length and width of the opening.

It is advisable to cut the glass as precisely as possible so that it easily fits into the mounting gaps. Before installing the glass in the interior door, fill the grooves with sealant.

doors more complex design to replace the glass will have to be disassembled. To do this, you need to find bolts on the sides, closed with special decorative plugs. By unscrewing the bolts, you can remove part of the canvas and remove the insert. Measurements to be made taking into account allowances.

Inserting glass into a kitchen door with a panel, the master must find the dowels in the upper and lower parts of the canvas. They need to be removed and 1 side of the frame removed. Pull the glass panel out of the groove, take measurements and cut out a replacement part. Assemble the structure in reverse order. Put the dowels on the glue.

How to insert rectangular glass

Rectangular inserts can also be found in interior or kitchen doors old apartments, and in expensive products in new buildings. Inserting glass into an old-style door is easy:

after dismantling the glazing bead and cleaning the recesses, measure the opening taking into account the groove;
cut a rectangle to size and insert it into the opening, applying a little sealant there;
install the glazing bead in place and secure with nails.

Inexpensive plastic, laminated and veneered products come with inserts on fasteners with glazing beads. In such a case, the repair is carried out as indicated for the old-style doors, removing the strips along the perimeter of the opening on only one side of the door. It is advisable to keep the nails that fasten the bead and use it when installing the planks in place. To prevent rattling of the newly inserted glass, before the procedure, silicone sealant should be applied to the recess between the blade and the slats.

Options for doors of complex design sometimes include non-removable fasteners: a groove with hidden wedges. Such a product will have to be taken to the workshop for a branded replacement: it is impossible to do it yourself. According to user reviews, repairing a complex structure with hidden fixation is more expensive than buying another door, so it makes sense to ask the sales assistant for details in advance.

Installation of non-standard forms yourself

Manufacturers produce unusual models of doors with glass of complex shape. They are beautiful, but their repair will not do without the help of a specialist. Do-it-yourself replacement of glass in an interior door should be started by inspecting the fastening of the insert: if it is too complicated, then you should immediately call the master to the house. But if there are removable elements, as a rule, you can replace the insert yourself:

Remove the door from its hinges and place it on a sheet of cardboard. Its size should be sufficient to completely close the opening.
Outline the opening as accurately as possible, do not forget to allow for installation allowances.
The template must be cut and tried on in the opening. It must fit exactly the size of the frame.
A template for glasses of complex shape must be taken to the cutting workshop.
It remains to put the finished parts into the grooves, smeared with sealant, and secure with decorative overlays.

in sliding structures

A sliding door can consist of a large glass sheet and a thin frame around the perimeter or look like a swing door: with inserts in wood or plastic panel. In any case, the canvas must be removed from the awnings and laid on the floor. An assistant is required to remove a heavy object from the profile grooves to slide the sashes.

If the door consists of a frame and glass, then you will need to disassemble it completely. Bolts can be found on the edge of the framing structure and removed. The edge of the glass is protected by a silicone seal, which must be removed and stored if not damaged. If the integrity of the material is violated, it is ordered together with glass door.

Take measurements along the length and width of the canvas. It does not shatter into fragments, but only becomes covered with cracks, so it is easy to cope with the task. When ordering glass in a workshop, you need to clarify that a material with a protective film (or triplex, as for car windows) is required. After receiving the ordered product, it remains to insert it into the frame, after putting the seal on the edges. When mounting, cut off the silicone tape so that it is 5 mm smaller than the glass on each side.

When installing a glass element between MDF panels the canvas is collected on a horizontal surface. To install glass, linings are most often used, which are attached to nails. When mounting the insert and driving small fasteners into wooden door you need to be careful not to break the glass: one wrong move will lead to a second repair. Raise the assembled door leaf and place it in the sliding door profile rails.

Most often, the repair of interior doors comes down to replacing broken glass. There are cases when you can change it yourself, but sometimes you have to turn to specialists. In this article, we will talk about when it is possible to replace damaged glass yourself and how to do it correctly and quickly.

What are glass for interior doors

lamination. During production, the glass is poured in several layers, between which a special film is placed. The result is a durable material that does not crumble upon impact.
liquid filling. In this case, a special liquid resin is poured onto the glass, which hardens under the influence of UV rays. It is quite durable, but it costs less than that obtained by lamination.

What to do if glass breaks

Such an unpleasant situation can happen to anyone and, unfortunately, can lead to injury. First you need to remove the fragments from the floor so as not to damage your legs. And then you can pull out the rest of the glass in the following way:

We put on thick rubber gloves so as not to injure our hands.
Using a screwdriver, loosen the glazing beads (the part holding the glass).
We take out the fragments and wrap them in paper. We start with large parts, and then move on to small ones.
We check the gasket tape for damage, if necessary, replace it with a new one.

Advice! It is best to wear shoes with hard soles so as not to injure your feet with small fragments. And after you have removed the remaining glass, vacuum the floor again.

After the remnants of the glass are removed, we take measurements to purchase a new one. You can call a glazier or measure yourself with a tape measure. If the opening has a complex geometric shape, transfer the dimensions to the tracing paper.

Attention! Glass should be freely installed in the door. To do this, you need to reduce its size by 1-2 mm on each side.

How to replace glass yourself

Usually the glass is fixed in the door frame with the help of glazing beads (quarters). Then the replacement of the coating will be performed as follows:

Using a chisel or screwdriver, pull the nails that hold the quarters out. Then grab with pliers and pull out.

Attention! First you pull out the side spatulas, then the bottom ones, and then the top ones.

We remove the old gasket (if it is dry or torn), as well as traces of glue and old sealant.
We coat the bed for the glass sheet with silicone for windows or sealant.
We insert the purchased glass into the canvas.

Advice! Glass should not fit tightly into the gasket, it is better to cut it.

We install the spatulas, adjust them in size, and then fix them with decorative nails.

Advice! If you purchased ordinary glass and want to get decorative texture, you can stick a special film. First you need to moisten the glass with soapy water and carefully stick the film, carefully removing all the air so that there are no bubbles.

How to change glass in monolithic doors

There are models of doors, the glass on which is attached without the use of spacers. In this case, you will have to disassemble the door, according to the following scheme:

Take the door off its hinges and place it on a flat surface.
We remove the plugs and unscrew the fasteners
Now you can carefully remove the side of the door and remove the damaged glass.
We install a new glass sheet and close it back with a sidewall. If you have problems with the seal that prevents the glass sheet from rattling, moisten the edge of the glass with soapy water.

In conclusion, I would like to say that there are situations when replacing broken glass in an interior door on your own is impossible. For example, triplex glass must be replaced at the factory, just as broken material cannot be replaced on PVC doors.

Broken glass replacement: video

Do-it-yourself glass replacement in the door: photo

Replacing glass in an interior door is a simple matter, but, like everywhere else, it is replete with its subtleties and nuances. This is just the case when we can say that one wrong move can lead to irreversible consequences. In this article, together with the site site, we will analyze in detail the process of replacing decorative glass in the door leaf in all its smallest details. Moreover, we will consider it with respect to several of the most common door leaf designs.

Replacing glass in an interior door: what we change for what

Before proceeding to a direct study of the issue of replacing glass in a door leaf, first we will study the materials that can be used for these purposes - you don’t think that glass is a panacea and it’s almost impossible to replace it? Here it's just the opposite - modern technologies provide a lot of options, not to use which would be, at least, stupid. Let's study them in more detail.

So, we figured out the materials, now it's time to move on to the theory of replacing decorative glass in door panels.

How to put glass on a door: a standard version using quarters

The standard option for glazing door panels involves the use of so-called quarters, which people sometimes confuse with glazing beads. On the one hand, they can be called that, but on the other hand, this is not entirely correct. But that's not the point - if this is what you have in front of you door leaf, then we can say that you are very lucky, and the whole process of replacing glass will happen quickly and easily. This technology looks quite simple.

As you can see, everything is quite simple, the only thing you need to understand is that almost all interior door panels are easily damaged. Carnations and glazing beads must be removed very carefully so as not to damage the decorative coating of the door itself.

How to replace glass in an interior door, see the video clip.

How to replace glass in an interior door: a non-standard option

Unfortunately, not all interior doors with glass are made according to the technology described above - there are doors that at first glance represent a solid structure made of wood and glass without the use of glazing beads. In order to complete and replace the glass, you will need to disassemble almost the entire door, as they say, into boards. How to do it? This process looks like this.

In conclusion, I want to add only one thing - if you are a creative person and have a craving for modernizing something, then a simple glass replacement in may involve some changes. For example, new glass can be illuminated from the inside - all that is required for this is to lay it in the end of the glass led strip and through connect it to the power supply. You can even do more - by equipping the LED lighting of the door glass with a contact switch, the diodes can be made to light only when the door is closed.