Passport on the door block. wooden interior doors GOST glass doors GOST tempered building glass

10.10.2016

The passport

Door block metal

1. General information about the product.

1.1 Products consist of four main elements: a door frame, a door leaf, a lock and loops for hanging the leaf on the box.

1.2 Door leaf is a welded structure made of one (two) steel sheets, stiffeners and anti-removable pins.

1.3 door frame It is made of steel profiles of complex shape, welded together. Mounting ears or holes for fastening through the door frame are provided for subsequent mounting on the box.

1.4 The door leaf and the door frame are connected to each other by hinged canopies welded or attached to them by a threaded connection, which provide free opening of the door.

2. Main technical data and characteristics.

2.1 Produced doors can be made (depending on the order) with external, right or left opening.

2.2 The reliability of a metal door must be at least 100,000 opening cycles.

Overall dimensions of a metal door on a frame can vary in width from 860 to 980 mm, in height from 1800 to 2050 mm. Enterprise Standards overall dimensions Width: 860mm, 870mm, 880mm, 960mm, 970mm, 980mm; height 1800mm, 1900mm, 1950mm, 2050mm.

2.3 The appearance and finish of the door corresponds to the samples.

2.4 Linear dimensions and limit deviations correspond to technical requirements GOST 31173-2003.

3. Delivery set

4. Safety requirements.

4.1 Products must be safe in operation and maintenance and withstand the operating loads in accordance with current building codes. The material used in the manufacture of door blocks meets existing safety requirements.

4.2 To work on the installation and maintenance of doors, technical personnel with the necessary professional training is allowed.

5.Transportation and storage.

5.1 Transportation of doors in a package is allowed in any type of land, air and water transport in accordance with the rules of transportation for this type of transport. Transportation, as well as loading and unloading must ensure the complete safety of the product.

5.2 Products must be stored in a vertical or horizontal (number of doors in a stack should not exceed 10 pieces) position on liners of the same thickness in closed ventilated rooms at a temperature of -40 0 From to +40 0 C and relative air humidity 50 +_ 15%

Devices and accessories not installed on the product must be packed in a container.

6.Maintenance and operation.

6.1 Maintenance of the door includes preventive inspections and control of its performance. Periodicity Maintenance doors should be at least once every three months.

6.2 During preventive examinations, the following operations are performed:

The completeness of the door and the integrity of the main components (door leaf), rubber seals are visually controlled;

The necessary repair and restoration work, cleaning and lubrication of mating surfaces (if necessary) are being carried out. It is recommended to lubricate the hinge assembly with a thin layer of grease every 6 months.

7. Order of installation and preparation for operation.

7.1 Doors are delivered assembled.

7.2 Installation of door blocks should be carried out by specialized firms, specially trained teams.

7.3 CHECKING THE DOOR BEFORE INSTALLATION:

Upon receipt of the door, check the integrity of the packaging.

Check the appearance of the product for mechanical damage and the compliance of the product with your order (model, size of the door block, color of the coating, type and color of the panel, opening side)

Check the completeness of the fittings and their appearance

Check the functionality of the locks

ATTENTION! Only after all stages of verification have been carried out, it is allowed to dismantle the old door!

7.4 The door is mounted in the openings of brick, concrete, reinforced concrete walls with a thickness of 125 mm or more, as well as in the openings of walls and partitions made of other structural materials, the design of the openings in which allows the installation of doors. For quality installation we recommend using masking tape (to protect the surfaces of the walls and the door frame from foam). Additionally, we recommend the use of PSUL (pre-compressed self-expanding sealing tape) for installation in the gap between the metal casing and the wall.

7.5 Mechanical damage to the door covering or decorative finishes and overhead elements during the installation of the door leaf is not the cause of a claim against the manufacturer.

8. Warranty obligations.

8.1 Guarantee period operation 1 year from the date of shipment to the customer.

8.2 The warranty period for locks and fittings is 1 year from the date of shipment to the customer.

8.3 The service life of the product is 1 year.

8.4 Warranty repairs are not subject to:

- Products with mechanical damage due to inappropriate conditions of transportation, storage, installation and operation;

Products with signs of self-repair, including self-disassembly of locking devices;

Products with signs of violations of operating conditions;

Products installed in violation of the installation instructions;

9.Certificate of acceptance.

9.1 The metal door block complies with the requirements of GOST 31173-2003 and is recognized as fit for operation.

9.2 The manufacturer reserves the right to make changes to the design of the door in order to improve performance without being reflected in this instruction manual and prior notice.

1. General information

1.1. Real products - wooden window and door balcony blocks of a single design with double-glazed windows, are a modern design certified in the GOST R Certification System for use in standard or individual construction.

1.2. The results of certification tests of wooden window and door balcony blocks with double-glazed windows, manufactured by 33 Du6a LLC.

1.2.1. The coefficient of reduced resistance to heat transfer (): for products with double-glazed windows 40 mm (4-16-4-12-4) - 0.706, which corresponds to the class "B1". Scope - residential and public buildings and structures.

1.2.2. Noise absorption for products with double-glazed windows - 26 dB.

1.2.3. The air permeability of products with a double-circuit seal corresponds to class "A".

1.2.4. Reliability of window devices and hinges - 20,000 cycles without destruction, damage and change in shape.

1.3. Locking fittings from AUBI (Germany), installed on these products, can provide four types of opening: rotary, tilt, tilt-and-turn and depressurizing (night ventilation), which prevents the windows from “fogging”.

1.4. The design of the products provides highly effective sealing of the premises (the absence of drafts through loose joints), as a result of which it is necessary to regularly ventilate them for hygienic reasons, as well as to remove excess moisture, which manifests itself in the form of “fogging” of glasses, to prevent the formation of white corrosion on the fittings under exposure to high humidity.

High humidity leads to swelling of the wood and the subsequent appearance of surface defects. Lack of ventilation (ventilation) leads to an increase in the likelihood of wood damage by fungi.

2. Completeness

The order package includes:

2.1. Finished products with installed double-glazed windows, sealing gaskets and locking devices.

2.2. Handles with fixing screws.

2.4. Other additional elements(additional profile, window sill boards, ebbs, etc.), specified by the terms of the order.

2.5. Real passport.

3. Rules of operation and maintenance

you purchased window system that needs maintenance. To maintain the reliability of your windows for many years, you should follow these guidelines:

Opening (closing) of the valves should be carried out smoothly, without jerks;
- for rotary (normal) opening of the sash, it is necessary to turn the handle from the “closed” (down) position by 90 degrees to the horizontal position;
- for the hinged opening of the sash as a transom, it is necessary to turn the handle from the “closed” (down) position by 180 degrees to the up position;
- for depressurization ("night" ventilation), it is necessary to turn the handle from the "open" position by 45 degrees upwards.

Attention!

Only turn the handle when the sash is fully closed! When the sash is open (rotated or tilted), the handle is fixed from turning.

If, when the sash is open, it simultaneously tilts (by pressing the leaf spring while turning the handle upwards), it is necessary to set the sash to the normal position as follows:

Press on the leaf spring located on the side of the sash at the level of the handle;
- set the handle to the up position;
- close the sash like a transom and turn the handle, without releasing the spring, by 90 degrees to a horizontal position;
- release the leaf spring, close the sash completely and turn the handle to the “closed” (down) position.

If it is necessary to press the sashes tighter (“night” ventilation), turn the locking rollers with a hexagonal (S = 4 mm) key so that the mark on the locking rollers faces the seal.

Attention!

Installation of the product should be carried out after finishing work (pouring floors and plastering walls) associated with changes in humidity in the room.

Manufactured windows and doors are painted with special environmentally friendly, deeply penetrating primers and paints. Soil components protect the wood surface from various pests and rot. Thick-layer paints and glazes applied by spraying protect the surface from external influences and moisture penetration for a long time, at the same time making it vapor-permeable, which allows maintaining equilibrium moisture in the wood. Such weather-resistant coatings require special care.

Complete stabilization of the paintwork occurs two to three weeks after painting, so during this time, with direct exposure to moisture, the appearance of wood texture, the appearance of white spots on the surface of the window, is possible. With a decrease in humidity, the spots disappear, and subsequently do not appear. This is due to the high hygroscopicity of natural wood.

A distinctive feature when painting with water-based paint systems is a slight uplift of the wood structure with the penetration of water into the product.

In addition, when priming window products made of timber glued on micro-studs transparent soils, a slight color variation on the surface of the products may occur due to the different density of the wood bars that make up the product.

However, on operational properties these factors do not affect the paintwork.

Attention!

Depending on the environmental influences, preventive measures are required to be carried out at intervals of one to five years.

It is necessary to lubricate the moving parts of the fittings with non-absorbent technical vaseline at least once a year.
- Check the seals for damage (if the seals are damaged, they must be replaced).
- Regularly (once every six months) to clean the paint surface from dirt, you should use ordinary cleaners - solutions of washing powders. After that, treat the surface with GlasuritQuick&EasyHolzbalzam.
- If it is necessary to update the surface coating wooden windows is carried out with the help of paints and varnishes of the Glasurit company (Germany).
- Periodically check the cleanliness of the drainage holes located on the outside of the lower part of the product.
- Glass unit surface wipe with glass cleaner.

Attention!

Data window systems they close very tightly and thus save a lot of heat. To prevent this advantage from becoming a disadvantage in the form of condensation, you should ensure that the room is regularly ventilated throughout the day.

4. Warranty

In catalog interior doors factory cabinetmaker presents a collection of classic and modern solutions for interior design, including novelties of 2018.

You can download the catalog at in electronic format(.pdf).

Warranty passport on the door

Passport for door block contains information about the rules for operating the doors of the Cabinetmaker factory.

You can download your passport at in electronic format(.pdf).

Catalog of doors model line 700

A booklet about the new collection of interior doors 2017 from the Krasnoderevshchik factory invites you to familiarize yourself with the 700 model line. Description of the advantages and features of the 700 model line, photos of new door models, types of finishes and other useful information.

Catalog of doors Cabinetmaker 2017

The catalog of interior doors 2017 invites you to familiarize yourself with the list of products manufactured by the Krasnoderevshchik company. general information about the factory, a description of the advantages, a range of interior doors in 2016, turnkey solutions and lots of useful information.

You can download the catalog at in electronic format(.pdf).

Catalog of doors Cabinetmaker 2016

Doors catalog 2016 offers to get acquainted with the list of products manufactured by the Cabinetmaker. General information about the factory, a description of the benefits, a range of interior doors in 2016, ready-made solutions and a lot of useful information.

You can download the catalog at in electronic format(.pdf).

Catalog of doors Cabinetmaker 2015

Door catalog for 2015.

You can download the catalog at in electronic format(.pdf).

Catalog of special doors

Special doors - fire-prevention, sound-proof, anti-vandal, moisture-resistant, chemical-resistant doors and others.

You can download the catalog of special doors at in electronic format(.pdf).

You can download the price list at in electronic format(.pdf).

The price list contains prices for the products of the Cabinetmaker for all model lines, including prices for door moldings.

You can download the price list at in electronic format(.pdf).

The 2013 catalog presents a new collection of interior doors from our factory, ready-made solutions for design and construction organizations, as well as a special offer for DIY retail chains.

Provided to your attention detailed information for each model line, the unique advantages of our products.

You can download the catalog at in electronic format(.pdf, 11.5 MB).

Interior catalog

The catalog contains short information about the factory, photos of all produced door models are posted, a brief description of their advantages is given. In addition, the catalog gives some manufacturer's recommendations for the installation of doors.

You can order a catalog (free of charge), specifying in the letter information about yourself, your postal details.

The catalog is sent by mail, or received directly from ZAO FSSI Krasnoderevshchik at: Russian Federation, Chelyabinsk, st. Mechanical, 40. Order a catalog

You can also download the catalog from in electronic format(.pdf, 2.8 MB).

Directory

You can get acquainted with the products of the factory, including the latest innovations, in the new "Buyer's Guide", which provides information in the form of illustrations and short description characteristics of door models. Ask for the guide at all outlets where our products are presented.