How to clean a plastic balcony door. How to clean a plastic window sill - tips from a master housewife! What can and cannot be washed plastic windows

How to clean doors?

We touch the doors every day, not just once, and not only we, but also guests, neighbors. As a result, on the surface doors sebaceous greasy spots, which are necessary launder. And even if you put in a new entrance or interior door cleaning cannot be avoided. Doors are now usually mounted using polyurethane foam and if they do it carelessly, the remains spoil the view.

Task 1: wash the metal, iron front door

After installation or insulation input (usually metal, iron) doors there is a need to wash remnants of mounting foam.

This must be done either immediately, until the foam has dried, or vice versa, wait for it to dry. In the first case use:

Solvents (white spirit, acetone, profit).

Special polishes for PVC - Cosmofen, Top Clean, Phenozol.

Special cleaners for hardened foam (sold in many stores) on a metal front door.

Dried foam can only be removed mechanically by grinding the surface. The remains are washed off by the methods listed for the first case.

Solvents will also help remove grease stains from the metal surface.

Task 2: wash plastic, wooden doors

The surfaces of plastic and wooden doors are similar in texture. Wherein wooden doors are often painted, and plastic ones are laminated, so abrasive powders can scratch them. To wash these doors, you can use:

soft damp cloth;

A solution that will help wash greasy stains on the door: 2 tbsp. spoons of ammonia + 1/2 liter of warm water;

Wooden planes, painted oil paint, are also best washed with water and ammonia. The dirtier the doors and windows, the more concentrated the solution should be: for example, 2 teaspoons of ammonia in 1 glass of water. Usually, it is enough to pour 2 teaspoons of ammonia into 1 liter of water;

Soap solution for heavy soiling: shavings of laundry soap dissolved in warm water;

Household chemicals: "Silit" for bathrooms, "Domestos", "Shumanit", "Profit";

Small amounts of solvents such as acetone and white spirit (do not use on painted surfaces);

Baking soda solution: moisten a soft cloth and wipe the door (carefully, a smooth laminated surface can be scratched);

Liquid ammonia based glass cleaner removes fingerprints from the surface of a plastic or painted wooden door.

Important when using any of the listed products, remember that a napkin soaked in a solution on the surface of the door should not be kept for more than 5 minutes. Wipe with a damp cloth 1-2 minutes after treatment.

Task 3: wash greasy stains on the interior door

FROM greasy stains on the interior door household chemicals for washing dishes, as well as hand-made solutions based on table vinegar, ammonia, citric acid. Solvents (acetone, white spirit) are effective, but should be used with caution on painted surfaces.

Preparation of cleaning solutions:

In 1 liter of warm water, dilute 1 tbsp. a spoonful of baking soda and 1 tbsp. a spoonful of washing powder, mix, then add 3 tbsp. spoons of vinegar. Time-tested: these components dissolve dirt and grease well. Make sure that the soda and powder dissolve well, otherwise the grains can scratch the surface of the interior door. - An ammonia-based solution can wash not only windows, but also interior doors. It is dissolved in water in a ratio of 1:10.

Vinegar is bred as follows: 2 tbsp. tablespoons of vinegar per 1 liter of water.

Comfortable pour the solution into a container with a spray bottle and thus spray it onto the surface. After processing, be sure to wash off the remnants of the solution with a soft cloth soaked in clean water.

Creativity is the real deal!

In conclusion, I would like to express an idea on how to transform interior wooden or plastic doors cheaply and beautifully: SELF-ADHESIVE! Such a self-adhesive film can be bought at a hardware store or wallpaper boutique. The range is huge: any colors, styles and textures. Purely making or flowered - the choice is yours. Such creative solution, by the way, suitable for window sills and old shabby furniture.

What means are used for self-cleaning of plastic doors?

Plastic doors are becoming popular. They have many advantages when compared with other materials. First of all, it is an affordable price. However, the quality remains high level. they are environmentally friendly, easy to care for, have an attractive appearance.

Despite all the positive characteristics, the question arises of how to properly wash PVC doors. Interior doors need proper care, like any other piece of furniture. More often on the canvases there are traces of dirty hands, as well as dust. At the same time, the door surface and fittings become contaminated.

Attention! Experts advise to monitor the appearance of the door during operation. This will eliminate the need to scrub dirty prints or spend a significant amount of time cleaning. This does not require any equipment. You can get by with hand soap and water.

Washing plastic

It is important to wash the PVC door leaf and fittings. Do not forget about the need to adjust, tighten the element or lubricate if it squeaks.
PVC is considered resistant to changes in temperature and humidity, but keep an eye on the microclimate in the room, keeping it at a comfortable level.
Close the door with polyethylene if you have started repairs in the house, painting walls or decorating the nearest surfaces to the door leaf.
If the PVC fabric has a matte finish, add a couple of drops of ammonia to the water. This will prevent the occurrence of divorces.
It will be possible to get rid of any contaminants with a soap solution, which is easily created at home.
It is better to choose as a rag soft version, the material for which is microfiber or suede.
Particular attention is paid to fittings, not forgetting to clean them. Additionally, handles are disinfected, as they serve as a collection of bacteria.

What does it take to clean plastic?

"Homemade" detergents

When wondering how to wash plastic doors, it often means which solution to give preference to. You can wash the door with hand-made options or purchased ones. All of them are universal, both for doors and windows. The difference lies in the fact that windows additionally require high-quality glass cleaning, which in door leaf may be missing.

Soap solution is one of the most versatile means to clean a plastic door or window, which is easy to use. One of the recipes: grate the floor of a bar of laundry soap and dissolve in slightly warmed water. The result is a product that is applied to the plastic windows or doors and left for half an hour. After that, it is rinsed with ordinary water and wiped dry with a cloth. Such a tool will allow you to cope with any pollution, including greasy stains.

How to wash plastic?

Another "home" product contains laundry detergent and technical soda. Means are taken in the amount of one tablespoon and dissolved in half a liter of water. Further actions are similar - the material is applied to the plastic and left for 30 minutes. After that, it is washed off with clean water. This method of cleaning plastic is used in the presence of serious contamination.

Use ammonia, which everyone in the house probably has. Take a tablespoon of the product per liter of water. Such a composition to cope with any pollution. If suddenly you begin to notice that your plastic window or door is turning yellow, use chlorine bleach. It is three tablespoons of bleach dissolved in ten liters of water. Such a tool is applied to the door with an ordinary clothes brush. It is important that the movements are unidirectional.

Choosing purchase options

If you do not have the opportunity or time to prepare “homemade” plastic cleaners, buy ready-made formulations in the store. Choose proven companies that create quality products. This will prevent possible damage to the plastic. Read reviews from other consumers to find the most optimal composition.

Washing plastic material

The principle of using a store-bought product and the preferred dosages are written on the package as instructions for use. It is not recommended to ignore them. Among all kinds of means, choose gel-like options. Abrasive particles in the composition are excluded. Their presence will lead to scratches on the plastic. As a result, dirt will accumulate inside scratches or cracks, which will lead to the loss of the attractive appearance of the structure.

If you notice streaks or water currents appearing during the cleaning process, change the cloth you are using. It is better to give preference to microfiber, flannel or choose fleece. The rag should be damp all the time until you remove all dirt. Otherwise, scratches may also appear. The final step is the use of clean water, which will get rid of residual contaminants.

Final work algorithm

In general, the algorithm for cleaning a door or window made of plastic is not complicated. It involves the following steps:

Mixing the selected agent for a plastic window or door in equal proportions.
Application on plastic material, especially on stained areas.
Gently rub into the plastic surface with a soft cloth or sponge.
Allow the agent to soak into the plastic of the window or door for a certain time.
Rinse off the plastic surface with plenty of water.
Wipe the plastic dry.

Plastic window and door cleaning

Now you know how to clean the plastic material of a window or door. Proceed according to these recommendations and consider the advice for each of the selected cleaning materials. Washing plastic material is not difficult. It is important to choose universal remedy, which will help wash dirt, both on the window and on the door. Plastic is a versatile material that is quite easy to clean if you act correctly and listen to the basic recommendations.

Washing of plastic windows, doors and double-glazed windows

How to properly clean plastic windows and doors

Personally, I believe that it is impossible to hide the natural attractiveness wooden windows and doors. However, the tree requires regular Maintenance, so more and more homeowners prefer plastic double-glazed windows.

Even builders prefer plastic doors and windows because they are more practical, cost less and are much easier to install. Double-glazed windows are very easy to clean, which is included in the minimum maintenance requirements. Plastic windows and doors easily withstand bad weather and are able to withstand the harsh Russian climate.

Simply put, plastic windows ideal for Russia, where heavy rains give way to snowfall and frost. And while double-glazed windows are characterized by low operating costs, no one has canceled washing plastic windows.

Maintenance of plastic windows and doors

To be truthful, all you really need to do is occasionally wipe down the windows, as there is usually no need to repaint or otherwise weather-treat.

In some cases, old plastic windows can become pale, and in damp climates, mold can form on the surface of the insulating glass unit. However, in such cases, nothing prevents plastic windows from returning to their original appearance.

People have their own habits when it comes to cleaning plastic windows, but it's important to remember that you should never use abrasive cleaners or brushes as you can rip/scratch the top finish (shiny) layer. It is very easy to scratch it, believe me!

There are specialized cleaners designed for cleaning plastic windows and doors - LUXUS spray for glass and plastic surfaces lemon 500 ml Luxus 400382322, we would advise you to purchase it.

However, there are inexpensive as well as environmentally friendly ways to clean plastic insulating glass units, which worked great in practical tests on doors and doors. window frames Oh.

You need to mix one part vinegar to four parts hot water, pour the mixture into a spray bottle and spray the mixture onto the plastic. Leave the mixture for a few minutes, then wipe with a clean and soft cloth.

If plastic windows and doors have lost some of their original, glossy sheen, there are some great plastic window polishes you can use to bring back the shine.

We have also heard from users using baby wipes or liquid laundry detergent that they are great for cleaning insulating glass. To be honest, you can clean most things in the house with baby wipes. Many families use them for delicate forms of cleaning.

I would also like to point out that people tend to make some mistakes when cleaning plastic windows, mistakes that can be quite costly. Some of the most common mistakes are as follows:

Using the wrong cleaning agent for plastic doors and windows can cause serious damage, so use products designed for manual work;
Do not try to paint plastic doors and windows, it will end badly;
Scratches on plastic doors and windows are a disaster, unlike wood, as they cannot be filled and repainted;
The lack of regular maintenance of the moving parts of the frame also does not bode well. You should check them regularly and lubricate them;

So, stay mindful of cleaning plastic windows and doors, make sure you avoid harsh cleaners, and never paint plastic windows.

And if we had to pick and name the best plastic window cleaner, it would be Help Orange plastic window cleaner, which is great for cleaning and removing dirt without scratching!

Use our tips for cleaning plastic double glazing and doors and you can save time without any hassle and the result will be shiny and crystal clear plastic windows.

How to clean plastic windows

Plastic windows fit perfectly into the interior modern home have become an integral part of it. First of all, because of its aesthetics, functionality, simplicity and unpretentiousness in care. However, they need to be thoroughly cleaned from time to time. Especially after the completion of repairs in the house, with proximity to dusty sections of roads, after a change in weather conditions to more favorable ones.

Folk remedies for cleaning plastic windows from dirt

If the windows have faded, lost their original appearance, accumulated traces of dirt, yellow spots are visible on them, then they will need urgent spring-cleaning. Pollution can be of various origins: from rainfall, traces of repairs, dust from the street, fingerprints, traces of pets and others.

To clean the dirt accumulated on the outer and inner surfaces of the glass, you can use a variety of products, both folk and professional, bought in a store specifically for this purpose.

Plastic structures should be cleaned in good, calm weather, during daylight hours, in order to minimize the risk of injuring yourself or damaging the surface of the windows, and also to clearly see even the smallest pollution.

Cleaning consists of washing the structure itself, double-glazed windows, window sills, plastic doors, handles and other fittings.

Washing glass and frames from dirt is easiest to organize from improvised means stored in the house. To wash plastic structures well from stains, you need to follow the processing technology and use the right window cleaner.

First, clean the frames of fresh dust and dirt using a warm soapy solution.

Then you can use tooth powder or chalk. They are suitable for cleaning plastic from yellow spots. They are diluted with water to the consistency of a liquid slurry and immediately applied to the surface. Wait a few minutes until completely dry, wipe and remove the remnants of the composition with a soft cloth. Then clean the plastic with water and wipe dry.

If the stain is old, you can use vinegar and soda. Pollution is sprinkled with soda and wiped with a sponge soaked in vinegar until the stain is completely removed.

For washing double-glazed windows, it is better to choose morning and evening hours, so that water and cleaning agent dry out less in the sun, and there are no stains on the glass, which will be difficult to remove.

Prepare clean soft cloths, sponges, clean warm water, and newspapers.

Remove dust from the glass with a cloth soaked in water, trying to make movements strictly in one direction.

There are some folk remedies that can be used to clean windows from dirt better and faster. Dissolve starch, crushed chalk or a little vodka in water - and the glasses will shine clean and keep their shine longer.

If there are greasy stains or stains on the glass, remove them with ammonia. To do this, apply alcohol to a cotton pad and wipe the surface. Don't forget to use gloves when doing this.

To wash plastic windows and rub the surface to a shine, an old clean newspaper is also suitable. It must be carefully crumpled and wipe the previously applied water on the window until dry. Wipe should be strictly in one direction, so as not to leave traces of cleaning on the glass.

Professional cleaners for plastic windows

If there are a lot of stains on the window, they are old or have been exposed to direct sunlight, then they may not be able to be removed with folk methods. Use professional products that will provide reliable results and cope with the most stubborn stain.

The main rule when choosing cleaners for plastic windows is that they should not be powdery, solvents and acids should not be used. Some leave scratches on the plastic, which later get new dirt, while others can change the color of the product or ruin it.

Organizing cleaning with the help of store-bought window cleaners is quite simple if you choose them correctly. Purchase a gel, cleanser, or universal fluid for cleaning all surfaces - all this will help clean the plastic and give it whiteness.

You can use washing powder as a cleaner for plastic windows. For greasy stains - dishwashing liquid and laundry soap.

Use the products strictly according to the instructions, protecting your hands from contact with active liquids on delicate skin with gloves.

After using any of these cleaners, wipe the surface warm water until the complete disappearance of traces of chemicals. Thoroughly ventilate the room after all manipulations, as long-term inhalation of possible fumes and odors of these liquids is unsafe for respiratory tract human and may cause allergic reactions.

How to whiten a window sill

The surface of the window sill is highly susceptible to various pollution factors: dust settles, stains from watering plants remain, pets leave their marks, fingerprints of the owners remain.

To wash the window sill, do the following:

Wipe the plastic surface dry and then with a clean cloth dampened with water. This will get rid of fresh dust and stains.
Use the remaining products that you purchased to clean plastic windows and frames: gel, cream or universal liquid cleaner. All this will help to whiten the window sill from traces and smudges that could not be removed with water.
After cleaning, wipe the plastic with a damp cloth and then dry.

Methods for cleaning a plastic window after repair

Repair work is always associated with a large amount of dust, dirt, soot and remnants of building materials that interfere with cleaning.

To bring the windows into proper shape, wash off the soot, traces of paint and putty, sticky tape or concrete splashes, you will need a variety of tools and techniques.

From concrete, putty and plaster

Traces of plaster, splashes of putty and concrete residues - all this can remain after the repair is completed on frames and glass, plastic balcony doors.

Start cleaning up after repair as quickly as possible to avoid the final drying of the spray. Treat all this with warm soapy water, wipe well with a rag - fresh stains will be removed. Treat the most stubborn stains with vinegar and leave for a while, then wash.

From mounting foam

When installing windows, mounting foam may get on plastic construction. Its drops can also get on the glass.

Fresh foam can first be removed with a scraper, plastic or rubber. Scratch well on the surface of the foam - a fresh cap of foam will be removed without effort.

In case of complete drying of the foam, it can still be removed. To do this, use the pharmacy drug Dimexide. Put on gloves, apply the drug to the area with cured foam. Leave for a few minutes. Then remove with a washcloth or hard sponge. Then you need to wipe the frame with warm water to wash off any residue of the drug.

Now in the assortment of drugs there are industrial products intended only for removing mounting foam.

From paint

After repairs, streaks or splashes of paint often remain on plastic and glass.

Remove dried paint with acetone-free nail polish remover. Apply it to a cotton pad, apply it to the stain for a few seconds, and then gently rub the stain. Then once again treat the spot with warm soapy water and wipe dry.

From scotch

Sticky tape marks can often be seen after repairs. They fix Construction Materials, it is used to indicate clear horizontal lines.

Best of all, sunflower or any other oil - olive, linseed - copes with traces of stickiness. It is applied to the sticky area, left for 10 minutes, and then the softened sticky layer is removed with a paper towel. If a greasy stain remains, remove it with dishwashing liquid and wipe it dry with a cloth.

You can use alcohol or vodka applied to a rag. The stickiness is wiped until it completely disappears. Then rinse the area with water and wipe dry.

General rules for the care of plastic windows

Here are some tips to help you take care of your windows, frames, and fittings.

After installing the windows, be sure to remove the mounting film. Under the action of the rays of the sun, it eats into the plastic, and then it is impossible to remove it without a trace.

Always keep several different supplies on hand. fast cleaning fresh stains: alcohol, acetone-free nail polish remover, vinegar, chalk, or an all-purpose cleaner for all surfaces. This will help remove the stain immediately, preventing it from drying out.

Periodically, it is necessary to wipe the rubber window seals with special silicone grease, and lubricate the fasteners and other fittings with machine oil.

Wipe window sills, frames and handles from fresh dust and dirt once a week. If there are flowerpots on the window, take care of them carefully, without damaging the surface of the plastic window sill.

Periodically clean the entire plastic structure.

Task 1: wash the metal, iron front door

After installation or insulation input (usually metal, iron) doors there is a need to wash remnants of mounting foam.

This must be done either immediately, until the foam has dried, or vice versa, wait for it to dry. In the first case use:

- solvents (white spirit, acetone, profit).

- special polishes for PVC - Cosmofen, Top Clean, Phenozol.

- special cleaners for hardened foam (sold in many stores) on a metal front door.

Dried foam can only be removed mechanically by grinding the surface. The remains are washed off by the methods listed for the first case.

Solvents will also help remove grease stains from the metal surface.

Task 2: wash plastic, wooden doors

The surfaces of plastic and wooden doors are similar in texture. At the same time, wooden doors are often painted, and plastic ones are laminated, so abrasive powders can scratch them. To wash these doors, you can use:

– a soft damp cloth;

- a solution that will help wash greasy stains on the door: 2 tbsp. spoons of ammonia + 1/2 liter of warm water;

- wooden planes painted with oil paint are also best washed with water and ammonia. The dirtier the doors and windows, the more concentrated the solution should be: for example, 2 teaspoons of ammonia in 1 glass of water. Usually, it is enough to pour 2 teaspoons of ammonia into 1 liter of water;

- soap solution for heavy soiling: shavings of laundry soap dissolved in warm water;

- household chemicals: "Silit" for bathrooms, "Domestos", "Shumanit", "Profit";

– solvents in small quantities, such as acetone and white spirit (do not use on painted surfaces);

- a solution of baking soda: moisten a soft cloth and wipe the door (carefully, a smooth laminated surface can be scratched);

- glass cleaner based on ammonia is excellent removes fingerprints from the surface of a plastic or painted wooden door.

Task 3: wash greasy stains on the interior door

FROM greasy stains on the interior door household chemicals for washing dishes, as well as hand-made solutions based on table vinegar, ammonia, citric acid, will cope. Solvents (acetone, white spirit) are effective, but should be used with caution on painted surfaces.

Preparation of cleaning solutions:

- In 1 liter of warm water, dilute 1 tbsp. a spoonful of baking soda and 1 tbsp. a spoonful of washing powder, mix, then add 3 tbsp. spoons of vinegar. Time-tested: these components dissolve dirt and grease well. Make sure that the soda and powder dissolve well, otherwise the grains can scratch the surface of the interior door. - An ammonia-based solution can wash not only windows, but also interior doors. It is dissolved in water in a ratio of 1:10.

- Vinegar is bred as follows: 2 tbsp. tablespoons of vinegar per 1 liter of water.

Creativity is the real deal!

In conclusion, I would like to express an idea on how to transform interior wooden or plastic doors cheaply and beautifully: SELF-ADHESIVE! Such a self-adhesive film can be bought at a hardware store or wallpaper boutique. The range is huge: any colors, styles and textures. Purely making or flowered - the choice is yours. Such a creative solution, by the way, is suitable for window sills and old shabby furniture.

Immediately after installation, plastic windows look attractive, decorating the room with their snow-white appearance. Over time, dirt from accumulated dust, traces of cups and flower vases appear on the windowsill. Frames may show black buildup of mold or simply yellow. Housewives are trying to wash and even bleach the plastic. But in order not to make things worse, you need to know exactly how to clean plastic windows without damaging their surface.

The window sill is most often contaminated. Dust settles more on a horizontal surface and is sometimes used as a stand for various items, resulting in many stubborn dirt spots. Before washing the window sill, it is better to remove the side decorative plugs from it. This will eliminate the accumulation of small particles of dirt at the joints. A stain-free surface can simply be washed with a microfiber cloth dipped in warm water. Then wipe dry to avoid streaks.

To clean old stains or traces after repair, you will have to resort to the use of cleaning products. They are best purchased at the store, but you can cook at home.

Home Cleaning Products

The appearance of yellowness or gray spots often contributed by external factors. This includes sunlight, temperature changes, or simply a change in the structure of the impurities added to the plastic.

All these unpleasant traces are easy to clean with home remedies:

These simple means, available in every housewife, will help keep PVC window sills clean.

Industrial cleaners

For people who do not trust home remedies, household chemical manufacturers offer various cleaning pastes, solutions and powders. But they can be no less dangerous for plastic if used unwisely, plus they can cause allergic irritations. skin hands

Of the most popular products that can be used to clean a PVC window sill, the following stand out:

Sometimes the hostesses try to clean heavily dirty surfaces with powders intended for caring for hobs. Yes, they are effective, but before washing the window sill with powder, you need to make sure that there are no abrasive substances in its composition. Solid particles will leave a lot of scratches, spoiling the appearance.

To wash PVC frames, almost the same means are used as for window sills, since the material to be cleaned is homogeneous. If after the repair of the apartment you have to wash the frame just installed windows be sure to remove the protective film. Over time, it will stick and it will be problematic to remove it. After that, ordinary dirt is washed off with water with the addition of laundry soap, dishwashing liquid or washing powder. It is important that any composition does not contain acids and abrasives. Even on new frames can appear small scratches. They are easy to hide by treating the area with a polish.

Shop products for the care of PVC frames

You can clean the PVC frame with the same “Mr. Proper" or similar means used for window sills. However, this list can be slightly expanded:

Domestos gel, specially developed for toilets and baths, is able to whiten yellowed frames;
the basis of the cream "Pemolux" is soda. It is safe for PVC surface and can easily clean stubborn dirt after repair;
it is good to wash off grease from kitchen frames with Comet gel. When using it, it is diluted at the rate of 60 ml of the drug per 5 liters of water;
Cream "Mr Muscle" will help whiten the frames. Rub the PVC surface with the preparation and wash it off with a wet sponge after 3 minutes.

Using any chemistry, one must remember about safety measures and use personal protective equipment.

Folk remedies for the care of PVC frames

You can clean PVC frames at home, as well as window sills, using folk remedies. Let's look at two of the most popular recipes:

Equal proportions of chalk and tooth powder are diluted with water to form a paste. This mixture is applied to a dirty surface and after drying, simply wipe it with a dry soft cloth.
To remove a stubborn stain, sprinkle it with soda and immediately rub it with a sponge dipped in vinegar. The resulting reaction will clean out the dirt, after which the frame must be washed with clean water.

Using the unfamiliar folk remedy, you must first test it on a small area, and then rub it on the entire frame.

Removal of aggressive stains

Often, after repair, aggressive traces remain on PVC windows, which are not always amenable to removal by store and home remedies. They can also be removed at home.

Tape marks

After removing the adhesive tape, sticky marks remain on the plastic. They cannot be removed with a dry cloth. Folk remedies will help here:

a piece of fresh adhesive tape is glued to the remaining trace and it is torn off with a sharp jerk. The process is continued until a positive result is achieved;
any vegetable oil lubricate sticky spot. After 10 minutes, the dirt is wiped off with a paper towel;
the sticky trace is erased with cotton wool or gauze dipped in ammonia or ordinary alcohol.

If there are small traces of tape left, do not immediately resort to aggressive cleaning methods. You can try to erase the stain with a regular eraser.

traces of paint

On plastic, traces of paint are a serious guest requiring immediate removal. First, you need to resort to a gentle method, smearing the dried paint with silicate glue. As the adhesive dries, it will begin to shrink, pulling the bulk of the paint with it.

How to adjust plastic windows with your own hands, if the sashes sagged or it bleeds through the windows.

If this does not help, take a piece of cotton wool, moisten it in a nail polish remover solution and wipe the painted area. It is important to pay attention to the absence of acetone in the composition of the liquid. Otherwise, this substance will corrode the plastic.

Mounting foam

Adhering foam in the wrong place is a common occurrence after repairs. Specially for PVC windows, Cosmofen is sold. Uncured foam is removed with a plastic scraper, and the remaining stain is wiped off with a rag soaked in this solution.

Dry foam should be cut to the maximum with a sharp knife, and moisten the remaining stain with Dimexide medical solution. After 5 minutes, loose residues are washed off with the hard side of a dishwashing sponge.

The store sells special foam solvents. Before using them, you must carefully study the instructions, otherwise an aggressive solution will do more harm than good. SOL OFF Delicat Barton'S is considered the most harmless to plastic and skin of the hands.

Soot

From the street side, a lot of soot settles on PVC frames. It is formed during the operation of factories and from car exhaust gases. Indoors, soot settles from tobacco smoke and burnt during cooking. Soap solution will help get rid of it or baking soda. They simply wipe the window, then rinse with clean water. Aggressive anti-soot products should not be used.

construction dirt

At the end of the repair, traces of cement, wallpaper glue or plaster remain on the windows. All these residues are easily washed off with soapy water. Strongly solid fractions can first be soaked in vinegar, then washed off.

Having cleaned the window sills and frames from dirt, it remains to wipe the glass. To do this, there are many store-bought products like "Second" or ammonia is simply added to the water. A traditional crumpled newspaper will help to add shine to the glass.

In contact with

Such remarkable properties of plastic as unpretentiousness, resistance to pollution and a humid environment have provided it with popularity among consumers and in the manufacture of products. household purpose. This polymer material is used to make furniture, window frames, doors and other products.

The structure of this polymer has practically no micropores, due to which it smooth surface tolerates well wet cleaning. The service life of plastic structures largely depends on proper care and the use of detergents.

The durability of plastic doors is determined not only by their quality, but also by how they are looked after and monitored. In order for the product to please with its attractive appearance, we will get acquainted with the main tips on how to properly care for and how to clean plastic doors for as long as possible. Both purchased funds and compositions prepared by oneself will help to solve the problem.

What to choose for cleaning?

Laundry soap is an effective remedy against various contaminants and plaque. 0.5 bars are rubbed on a grater and dissolved in heated water, the surface is treated with the resulting composition and left for 30 minutes. After that, rinse with water and wipe with a dry cloth. Due to the alkali content, the solution copes well with greasy stains and other contaminants.

Washing plastic doors is easy with a composition of technical soda and washing powder. To prepare it, you need half a liter of water and 1 tbsp. l. these funds. The composition is applied to the surface of the door leaf and left for 30-40 minutes, after which everything is washed off. This cleaning method should be used for advanced cases.

Cleans plastic well greasy plaque ammonia solution prepared from 1 liter. water and 1 tbsp. l. funds. In case of yellowing of the material, chlorine bleach can be used. To do this, in 10 liters of water it is necessary to dilute 3 tbsp. l. means and the resulting composition with a clothes brush to wash the door. Movements must be performed in one direction.

Purchasable funds

There are also special universal cleaners for plastic surfaces, but it is better to give preference to a well-known manufacturer that has positive reviews consumers. When buying, do not forget to familiarize yourself with the composition of the selected product and the rules for use.

Popular products trademark Amway. To clean any surface, you can use the ecological cleaner L.O.C. to do this, dilute 30 ml of this product in 5 liters of water, wash the doors and dry. When choosing detergents, you should pay attention that they do not contain such aggressive components as solvents and acid-containing compounds that soften plastic.

For washing plastic surfaces, give preference to compositions with a gel-like consistency, since abrasive particles can form small scratches in which dirt will accumulate.
Use a microfiber, flannel or fleece cloth to prevent streaks and stains on the door leaf.
Before cleaning old dirt with special products, first wipe the door with a damp cloth.
On the final stage Rinse off the remains of used drugs from the door with plain water.

Do not forget that the door has served for a long time, treat it with care, take care and wash it with products that are suitable for this particular material.

In order for the house to always be comfortable, it is necessary to regularly clean all rooms. But complete comfort even in a fully tidy apartment you will not achieve if you forget about one important detail - the cleanliness of interior doors. The door is the first thing we pay attention to when entering a room. Most often, this attention is casual, as if passing by, but the subconscious mind always notices on a smooth and flat surface smudges, stains, dust, scratches and other “malfunctions”, so it is necessary to regularly proper care per interior doors. Door care rules various materials differ significantly. In our article, we will look at how to care for PVC interior doors.

Polyvinyl chloride is a modern artificial material, characterized by lightness, sufficient strength and maximum ease of care for products made from it. In order for the surface of the PVC door to become clean, most often it is enough to wash it with warm water, to which a small amount of detergent is added. This tool should not contain too many active, caustic substances, otherwise you will have to say goodbye to your door. It is better to add liquid to water detergent, for example, dishwashing liquid (Drop, Fairy, etc.). Such products are intended for degreasing surfaces, and we, in principle, will need to achieve this.

Never use cleaners such as acetone, thinners or alcohol to clean PVC doors. Also, do not use detergents in powder form. Not only can they scratch the door surface, but besides this, cleaning powders most often contain high concentrations of active substances that can “corrode” your door, and its appearance will be hopelessly damaged.

Use a soft cloth or brush with fairly soft bristles to clean the door. Never clean your door with scrapers or sponges containing plastic or metal surface- you can damage the PVC door.

If there are scratches and other mechanical damage on the door, they can be puttied with a special paste. If the scratches are very small, then a few strokes with an ordinary clerical proofreader will be enough.

If your PVC door has a glass insert, then use ordinary glass cleaners to clean the glass surfaces (for example, Mr. Muscle, etc.). Wipe the glass with a soft, lint-free cloth to avoid streaks. You can wipe the glass with a dry newspaper in the old fashioned way. There are also special wet wipes for cleaning glasses. Do not use gasoline, kerosene, acetone or other chemical solvents to clean frosted glass. Only special means for glasses.

Sandblasted surfaces are very easy to clean from grease stains, handprints and streaks with dishwashing detergent. Add a little undiluted dishwashing liquid to a soft brush, rub the stained area until desired result then wipe with a soft dry cloth.

As you can see, taking care of PVC doors is actually very simple, and all the necessary tools are most likely always at hand.