Arbor from old window frames. Overview and comparison of glazing methods for gazebos

They have always been much more popular than the closed ones. And it is not surprising, because the very idea of ​​​​such a structure involves close "communication" with nature. But what to do if it suddenly rains or a strong wind blows outside.

In this case, staying in an open gazebo may not be too comfortable. Meanwhile, the way out of this situation is very simple - the installation of glazing. Its modern varieties are made of light, aesthetic and practical materials.

The main purpose of glazing

So, how to close the gazebo from bad weather in the summer or for the winter? When choosing the type of glazing, you need to consider that such structures should:

• reliably protect the interior of the building from adverse weather factors;
• be mobile (easy to open and close);
• be sufficiently strong and durable;
• have

See how beautiful and practical glazed windows can be different types street houses:

Use of eurowindows

Modern European packages are used for glazing arbors most often. And no wonder. They are relatively inexpensive and almost anyone can buy them.

Glazed gazebos. Photo of a structure fenced with windows on a PVC profile

Warm glazing device

In this case, three-chamber windows are usually used on a PVC, metal-plastic or wooden profile. The first option is cheaper. But wooden profiles look more aesthetically pleasing. By design, windows of both these types are hinged, folding or sliding. You can install them yourself if you wish.

The project of a street building, glazed with windows on a wooden profile

When fencing with multi-chamber double-glazed windows, you should also take care of the insulation of the main structural elements structures - floors, blank walls and ceilings. Only under this condition can the building be used in winter.

Therefore, plastic and wooden windows- an excellent answer to the question of how to close the gazebo for the winter. Usually when using them.

Spacious gazebo with woodgrain PVC windows and a fireplace

cold glazing

Glazing of arbors is often made aluminum profile with tubeless glass. The advantage of such structures is the ease and the possibility of self-dismantling / assembly if necessary.

Street buildings, glazed with windows on an aluminum profile, look very neat

The undoubted advantage of aluminum structures with any number of glasses is strength. Such windows can be used for glazing, including gazebos with very large openings.

Frameless designs

This is one of the most interesting and beautiful varieties cold glazing. In this case, the glass is attached only to the top and lower profiles. The vertical support elements either have a very small thickness, or are simply absent. They look for a summer residence, glazed with frameless windows, very stylish and modern.

Beautiful building with panoramic windows

There are frameless designs in which the glass is shifted to one side and folded in the form of a book. The buildings protected by them can be ventilated by opening the doors to a width of 10 cm. Glazed gazebos for summer cottages look quite impressive when using this option.

Frameless glazing when folded

Sometimes frameless sashes move parallel to each other. Some disadvantage of this design is that when using it, it is possible to ventilate the gazebo only in a slit way.

Frameless glazing with parallel sliding sashes

How can you close the openings of the gazebo yet

There are alternative methods of glazing summer cottages. In addition to euro windows, polycarbonate double-glazed windows or roller shutters can be used for this purpose, as well as pvc film and stained glass.

Use of soft glass

The method of glazing using PVC films is currently becoming more and more popular.

PVC curtains - great way protection of the gazebo from rain and wind

There are such soft windows for gazebos are much cheaper than glass ones. They perform their main functions very well. Buildings “glazed” in this way also look just wonderful. gazebos through special plastic oval eyelets on swivel brackets.

Gazebo with barbecue. Photo of a structure protected by soft polycarbonate windows

The only disadvantage of using flexible windows for gazebos is the need for careful handling. PVC film is not very resistant to punctures and cuts.

PVC film - the material is not very resistant to mechanical damage

Polycarbonate double-glazed windows

This material is more expensive than soft glass. For arbors, however, it fits very well, since the main drawback of the latter - instability to mechanical damage - is devoid of. Windows from it, of course, will last longer.

Outdoor building with barbecue, glazed with polycarbonate

roller shutters

A rather interesting type of polycarbonate "glazing" are transparent roller shutters. For a gazebo, they are also very good. Such roller blinds consist of separate translucent slats.

Polycarbonate roller shutters - a great option for a gazebo

stained glass

Just a luxurious gazebo can be made using stained-glass windows with an aluminum profile. They are mounted and operated in the same way as ordinary double-glazed windows. But stained glass windows are, of course, more expensive.

Pergolas with stained-glass windows can actually look very impressive.

As you can see, there are many types of glazing for gazebos. Choose any, and you will make your pastime as pleasant as possible, not only on sunny days, but also in bad weather.

Modern plastic, aluminum, wooden window structures are not just a tribute to the times, but also an important improvement in the heat-saving function of the house. Very often they replace old frames made of durable solid wood that can last for a very long time, but in a completely new quality. In which? Here are 16 ideas and detailed instructions for them.

Jewelry storage frame

A small frame is an excellent basis for a stand where you can comfortably hang your jewelry. If desired, the wood is cleaned with sandpaper from the old paint, or the old coating is left, updating it where required. Glasses together with glazing beads are taken out, and a metal mesh is inserted into the gaps. It remains to screw with reverse side loops for hanging the stand on the wall and start decorating it.

Organizer for kitchen items

The kitchen is a room with high humidity, so the wood needs protection. The frame must be varnished or oil paint pleasing to the eye shade. The crossbars between the glasses are ready-made bases for hooks. This organizer can be placed in working area or decorate them with a free wall. Many ladles, stirrers, graters and other tools will find their place on its hooks.

Clue! You can mount such an organizer not only on the wall, but also on the ceiling.

Greenhouse or greenhouse

Two frames with whole glass will serve as an excellent base for a greenhouse on personal plot. We choose a garden. We surround its perimeter with stops. For this, ordinary cobblestones are suitable. We lay them out along the long sides of the beds. We rest two frames with long sides in rows of cobblestones, and bring the upper sides together, getting a “house”.

Advice! To give the structure stability, fasten it with door hinges.

Frame for flower pots

To hang 10 planters on the wall, you will need to punch 10 holes for fasteners. You can do otherwise. We take the old frame, remove the glass from it (or leave it as you like). We paint in suitable for the interior shade. In the upper part on the reverse side we fasten 2 loops for hanging. We make 2 fasteners in the wall (self-tapping screws or dowels). We hang the stand, and then we attach as many planters to it as we want.

Coffee table

A solid frame is a finished tabletop. It can be decorated in any way: painting, carving, painting, varnishing, etc. From below, it remains only to screw the legs to get coffee table suitable height.

Headboards

Rustic style requires that the interior has a lot of light and undoubted signs of antiquity. Making a headboard out of a used rectangular or arched frame is a great idea. We remove the old headboard from the bed and fasten a new one from 1, 2 or even 4 frames. Fortunately, wood is a material that is malleable for creating three-dimensional structures, and self-tapping screws and ordinary nails can be used as fasteners.

Picture frame

If the thickness of the frame is not very large, like its format, then it will easily turn into a photo frame. When the binding is already divided into 6 cells, this is ideal, but the internal space can also be independently distributed into the required number of sectors with slats. All you need is to nail a sheet of plywood on the back, and the stand is ready. Photos are easily fastened with buttons, pins.

Tray

A small window sash turns into a neat and reliable tray in a matter of minutes. It only takes two doorknobs loop type, which we attach to the right and left, in order to conveniently carry the tray from place to place. But in the decor you can show all your imagination.

Organizer

We have several containers, dainty hooks, decorative pouches or baskets - you can make a great organizer for anything. It is enough to distribute in artistic order (or disorder) all this wealth along the frame. The glass does not need to be removed. It remains to find a place for a masterpiece in the workshop or pantry.

Hanger

An elegant hanger is obtained from any frame. Glass will only add grace to the finished thing. If there are 2 wings, then they are fastened at a right angle and get a hanger with a shelf. All you need to buy is hooks of the right size and design and fasteners to the wall.

Summer gazebo

Sometimes windows are changed according to plan and as a result they get a whole bunch of large frames. It is expensive to take them out and dispose of them, but making a gazebo out of them is much easier, and even more useful. To make the structure really strong, make 4 support pillars, the lower ends of which are dug into the ground and strengthened cement mortar. But the frames on this frame can be mounted in a way that is more convenient in this case.

note board

You will need: frame - 1 piece, a sheet of plywood in a slightly smaller format. We nail the plywood to the base and cover it with black paint. In a suitable place, such a note board can simply be nailed to the wall.

Watch

The finished mechanism, along with numbers and arrows, can be bought at the store, or you can use the existing one. We take small size sash and make a hole with a glass cutter. We insert the clock mechanism and fasten the rest of the watch parts with special glue. You can hang!

Advice! The thinner the frame, the more elegant the finished result will be.

room decor

Colorful panels and posters are a great decoration for any interior. Instead of a banal frame, you can use a more creative option. Take the sash with glass and place the poster behind it. In this form, the picture takes on a completely different charm.

Mirror

Depending on where exactly the mirror will hang, you can decorate it in different ways. For example, use only the outer contour of the window frame, filling its inner space with a single piece of mirror. Or cut the mirrors according to the glass format and replace the glazing with them.

garden lantern

Small frame sizes are ready-made parts for assembling a garden lantern. In fact, we need a box in which one of the faces of the box is hinged. To make it so is very simple, it is enough to use furniture hinges. And on top we attach a hook for hanging a flashlight in the gazebo or on the veranda.

See how to make a pergola out of old doors. From them you can make a gazebo, a washbasin, a tool shed, and a greenhouse will turn out of the windows.

The content of the article:

A new one has begun holiday season. Those who love to work and relax in the fresh air yearned for their hacienda during the winter, they are looking for new ideas for inspiration, they are happy to implement them. In order to have enough funds for all ideas, use objects that have served their time as material. With the help of old doors you can make a pergola, a shed for inventory, a toilet, a gazebo, a washbasin.

How to make a pergola with your own hands?

If you do not know what this design is, then read about it right now. The word "pergola" comes from the Latin and Italian words and means "building", "canopy". It is created for beauty, so that climbing plants can freely trail along this structure, protect people from the scorching sun when they walk along this terrace.

The design represents sections of arches, which are connected into a single structure by transverse bars. Pergolas can be attached to buildings, they will decorate open terraces. Sometimes they are attached to arbors or pergola arbors are built.

If you have a lot of material, then you can make a large design. If you changed the balcony, interior doors, do not throw away the old ones, then give them the opportunity to decorate the cottage.

• two doors;
• White paint;
• primer;
• sandpaper;
• tassel;
• boards;
• self-tapping screws;
• screwdriver;
• gravel.

To remove from the door old paint, use a special solution to remove such a coating. You can put newspapers on the surface, iron with an iron, after which the layer is removed with a spatula.

Connect these prepared blanks with vertical crossbars. If you have a jigsaw, then decorate them in the same way as in the photo, if not, just saw off to the specified size. Make two notches on each side of these crossbars, put them on the doors, fasten them with screws on the side.

To make the construction more durable, connect the parts at the top with planks sawn off at an angle of 45 degrees. They and the horizontal rafters must also be painted. Such a pergola is installed on gravel, if you want to place it near the veranda, then attach it to a wooden floor.

• 4 door leafs;
• four curly brackets;
• self-tapping screws;
• fixing metal corners;
• white paint and brush.

You can plant climbing plants outside one and the second wall or attach boxes, place flowers in them. The inner space can be used to make a small bench here. To do this, beams or corner brackets are attached to walls 1 and 2.

There are other ideas for using old doors.

How to make a washbasin for a summer residence from old doors?

• Door;
• bars;
• boards;
• fasteners;
• countertop;
• hooks;
• two curly brackets.

1. Two bars will become the front legs of the washbasin. Choose from four boards for the base of the table. In the countertop, you need to cut a recess in the shape of the sink, put it here, put a container on the bottom, which will need to be poured periodically. You can install a flexible hose under the sink, lead it into the drain system or ditch so that water flows there.
2. Four boards are fixed on the lower parts of the legs, four more are stuffed on them, which will become the lower table. Attach hooks at the top to hang towels, small garden tools here.
3. 2 openwork corners are attached even higher. A shelf is fixed on them, on which flower pots are placed.

Behind this, it is convenient to do small garden chores: dive seedlings, plant flowers in pots. You can attach hooks to the door, hang small garden tools on them so that it is at hand.

If you also have an old window that is a pity to throw away, you can turn it into one of the sides of a table or washbasin.

The design of the gazebo of doors and wood

• five doors;
• floorboards;
• hinges for doors;
• metal corners;
• self-tapping screws;
• a small sheet of corrugated board;
• 4 beams;
• gravel.

1. Level the site for the future building, pour gravel here, make the base for the floor from 4 beams. Put boards on top of it.
2. Connect two doors that will become the back wall. With help metal corners and self-tapping screws, attach two more canvases to it at an angle of 90 degrees. These doors will become sidewalls.
3. These canvases are with glass, and for the top it is necessary to use a door without glass. It is necessary to lay it at a slight angle so that water flows and snow melts. To do this, either use side doors that are higher than those that became the back wall, or attach angled bars to these side elements.
4. Fix a sheet of corrugated board from above so that it is slightly larger on all sides than a gazebo. You can also use another roofing material. At the bottom of the door can be attached to the floor, also using the corners.

The next building is also created based on the door. 3 canvases are installed at the back and one at a time on one and the other side. Since this design is slightly larger than the previous one, you need to attach boards to the ceiling, but you can fix the rest of the doors here transversely, using them as the basis of the roof.

To stiffen the structure, a bar with a section of 100 or 150 mm is placed at the corners, the structure must first be fastened at the bottom with floor fixing elements, and on top? roof details. It is pleasant to sit in such a gazebo without doors in the heat, here you can hide from the rain, as the roof will not let you get wet.

Such a building will appeal to both adults and children.

But let's get back to our topic to see what other gazebo design can be.

It seems that the next building is also on this site for many 10 years.

You can also make from doors small shed for storing tools. For it you will need:

• four doors;
• boards;
• bars;
• roofing material;
• fastening tools.

Nail four bars on top, fix the rafters on them, fill the boards, fix the sheet of the roofing element.

The next gazebo pergola is made in white and pink colors. Two doors without glass are suitable for her. If they have plywood on the bottom, leave it on; if not, stuff boards here. Laths are nailed to the top of the door at an angle of 45 degrees perpendicular to each other.

The gable roof is made of rafters, planks are stuffed on top. A bed is fixed inside. All this charm is covered with pink and white paint. It remains to fasten boxes with flowers outside, put on a bench soft pillows, hang two tulle curtains at the entrance.

How to make a greenhouse out of windows yourself?

It will also require secondary material left after the repair. If you have glass doors, take them. If these are not available, you can use a door frame by attaching glass inside. Windows are perfect for the next mini-greenhouse.

• cement blocks or bricks;
• bars;
• sand;
• self-tapping screws;
• enough windows.

The evenness of the horizontal structure during construction must be checked with a level, if necessary, make adjustments.

1. First of all, you need to level the site on which you will build. Remove the sod along the perimeter to a small height, pour sand here. Install blocks or bricks on top, it is better to connect them with cement mortar.
2. When it dries, put the slats on top around the perimeter, fastening them with corners and self-tapping screws.
3. Now bars are vertically attached to this wooden base, the distance between two adjacent ones should be equal to the width of the window. At the next stage, you will need to insert them here and fix them on the side with self-tapping screws.
4. Now put the horizontal beams at the top, also connect them together. Do not fill in the small side wall on one side yet, as this will be the entrance.
5. Mark on the upper horizontal beams where you need to make small notches for the rafters, make them. Fasten the roof base from above. For this, it will also be possible to use glass frames or durable cellophane. If you do not want to take it off for the winter, then it is better to fix transparent polycarbonate here. From it and from the frames you will make doors.

In conclusion, look at the intricacies of building a greenhouse from window frames. This can be useful for gardeners.

Do-it-yourself gazebos from improvised materials can even have best view than those performed by professionals from popular building materials. There are a variety of options for such structures.

Even glass bottles(see), which are a pity to throw away, will be useful for construction original design for a suburban area. The main thing is to choose the right solution on which they will hold. The article will tell you what materials you can use for the gazebo.

Improvised material for the gazebo can be very different.

For example:

• Remains after the construction of the main building.
• Glass bottles. When constructing a gazebo from such material, it will be necessary to manufacture a strip foundation. bottling mortar used cement-sand mixture or with lime base.

When laying bottles, each next layer should be performed only after the previous one has completely dried, which increases the strength of the structure and facilitates work.

Tip: When laying the bottles, it is imperative to close the neck, which will prevent the solution from getting inside. The finished structure is translucent, and if dirt, solution or any foreign objects appear inside the bottle, they will be visible.

• Plastic bottles. Such an arbor from improvised material is constructed by hand using the following technology:

1. going a large number of plastic bottles;
2. they are filled with ordinary sand;
3. screw caps;
4. bottles are tied together with a strong rope;
5. the free space is filled with cement-sand mortar.

• Video cassettes.

• Beer cans.
• Wooden pallets.

How to build a gazebo from old window frames

After the building materials for the gazebo have been determined, you can begin to implement your plan.

Work instructions:

• The territory is marked.
• According to the marking of the base, a trench of small depth is dug in the form of the letter "P".
• A pillow about 12 centimeters thick is laid out of sand.
• Open window frames are fastened with narrow boards on self-tapping screws.
• This is how the back wall and two sides of the building are constructed.

Tip: To exclude the effects of moisture, the structure should be treated with any moisture-proof material or painted.

• The assembled structure is installed on a ditch prepared in advance.
• Everything is held together with metal hooks.
• After complete assembly and fixing of the elements, the trench is covered with earth.
• A thorough tamping of the surface is carried out.
• These parts of the gazebo must be firmly installed and not sway from the wind.
• The roof for such a design should be light, well protected from rain and sun. An ideal option for such a gazebo is a multi-colored oilcloth, which will give the design practicality and an attractive look.

The oilcloth is placed on the walls, neatly straightened and fixed to the frame with nails, at an equal distance.

• From improvised materials, the gazebo is decorated and decorated (see). To do this, you can use plastic items: chairs and benches. Plastic is resistant to temperature changes and many other harmful environmental influences.

Other gazebo designs

A simple and absolutely free gazebo can be made from rods (see).

When building such a structure:

• Before you make a gazebo from improvised materials, which are rods, stakes are driven into the ground to a depth of at least 35 centimeters. Usually they are taken from deciduous trees, but others that do not shoot can be used.
• Weaving the structure is done with a pigtail or rope.

Simple fabric gazebos can be made from the remnants of fabrics, old sheets. Do-it-yourself frame for them can be built from pieces of wire of large diameter or wooden racks. Simple gazebos look original, they have fabric roofs, as can be seen in the photo.

The project of a simple gazebo is selected based on its location, climate conditions, available materials for manufacturing. A drawing of a gazebo from improvised materials can be developed independently or taken ready-made from professionals.

What improvised materials for the construction of a gazebo can be used, the features of their construction, advantages and disadvantages, the video in this article shows in detail.

A beautiful small gazebo with your own hands from improvised materials (photo below) in the shade of dense trees will decorate any site. Relax on a hot day, drink tea or chat with family members - lovely country joys. Many people are stopped by the complexity of the construction. I don’t want to take on heavy work, especially if there is little experience in construction or there are fears that a home-made gazebo will not be beautiful enough.

A gazebo from improvised means can be built in one day.

What material is considered improvised

What material is considered improvised? Bottles, flexible branches, old window frames and children's swings - all this will be a great idea for creating a unique futuristic design.

The table shows the properties of some materials from which similar structures are reproduced.

Do-it-yourself gazebo from improvised materials - photo instruction

We invite you to consider an example of how a gazebo is made with your own hands from improvised materials. Photo of the finished structure of wicker rods at the end of the section. Start designing first.

Project and drawing

For design, decide on your own preferences - whether you want an open gazebo or a closed one. Do you want to put a canopy adjacent to the fence? How many windows? Where is the door located? Once you've made your choice, draw it.

If you are not a very good artist, there are enough programs to help you create a decent drawing. When drawing, it makes no sense to go into details - the main thing is not to forget to indicate the dimensions of the gazebo and its components.

We select a place

Your simple and original gazebo made of improvised materials has already taken shape on paper - it's time to bring the project to life. Inspect the area carefully. A flat place, devoid of mounds and pits, is great for installation. Advise to choose places with minimal presence of clay soil, but the wicker building is light, and the chance of it falling into loose soil is small.

Material selection

To quickly build a wicker gazebo from improvised materials, prepare tools:

Pliers

Gloves

materials:

metal bars

Wire

Straw

When choosing rods, be guided by their flexibility - it is best to choose young rods

Foundation

Having chosen a place, we proceed to the foundation. You will need to level the ground around the building and remove excess debris and grass from it. Solid tape, or monolithic foundation you will not need it, but to strengthen the structure, it is recommended to dig a few pegs around the perimeter.

Decide on the boundaries of the gazebo and dig into the ground around the perimeter of the rack. If you want to add stability, concrete the resulting pits (fill with concrete and cover with rubble on top), and then proceed to the construction.

The earth is cleared of unnecessary rubbish, it's time to start weaving. To do this, take a rod, fix its end with a wire and twist the stakes. You should have a basket. The ends of the woven rods are attached to the post with wire.

Since the construction is easy, do not load it from above with heavy materials such as tiles or slates. In addition to physical unpretentiousness, it will not look so beautiful. Roofs from natural materials- reeds, reeds, straw. Remember that these materials are not durable.

To lay the roof, use metal rods or wooden beams(Equally effective, we offer to choose from what is at hand). After fixing the rods or beams on the racks, lay the roofing material.

decoration

Such natural naturalness will serve as a decoration better than other decorative things, but you can always add a little comfort - weave a couple of wicker chairs by throwing a few colorful pillows on them.

Lay a stone or wooden path nearby. Dig around the edges floor lamps- at night, such a landscape will look fabulous.

Weave flowers into the walls or let them completely braid the walls themselves - the impression of a real house in the forest will appear.

Exploitation

Use your own woven structure only in the summer. For the winter, we recommend putting it in a secluded place so that in spring and summer it will again please the eye on the site.

Gazebo options

The selection of unusual material is beneficial. You do not have to spend a lot of money on expensive raw materials, they are assembled by hand. The other side of the coin is a quality issue. There is no guarantee that a building made on hastily, will stay for a long time.

There are many options from which to make gazebos with your own hands from improvised materials (see photo below) there are many:

• pallets;

Each of these designs will be a good addition to your country design. Let's consider them in more detail.

Arbor from plastic bottles

Arbor from plastic bottles has many advantages: plastic lightweight and it's easy to work with. The construction of a small structure will require at least 400-500 bottles which must be stored somewhere during construction. It is easier to store them in a barn so as not to create the impression of clutter on the site.

A simple gazebo will turn out to be more interesting, the more diverse the bottles you use. In addition to bottles, you will need a frame made of metal fittings.

pallets

If you have enough pallets, use them to build remarkable gazebo. Pallets are knocked down and on their own or ordered in a store. When using used pallets, you will have to clean them of dirt, knock them out and sand them.

The disadvantage of the design is its fragility - if you do not make certain efforts to preserve the wood, then the building will not last long. We recommend treating with antiseptics from decay.

old window frames

Replace old windows with new frames - do not rush to throw them away. They will fit for the construction of an unusual gazebo from old window frames. There is practically no need to spend money (all that is needed is materials for the foundation and roof).

An interesting design makes the structure desirable for everyone who loves the sun - the building will allow you to sunbathe and enjoy the excellent view from several windows at once. This is also its minus - for lovers of shady nooks, such a choice is not very reasonable.

Installation of window frames requires special care when - this can somewhat slow down the construction process.

Wicker

A wicker gazebo looks spectacular, in particular. We do not recommend installing a brazier in it, as there is a high probability of ignition of the structure.

If they call pluses original design and attractive appearance, cons come from attempts to erect a building - to make a structure, you will have to spend a lot of time.

The vine from which weave similar structures is not the only material. Use reeds and reeds. Strength is tested by wind and bad weather - do not install a heavy roof.

Video: simple gazebos

Photo gallery