Dendroplan of a summer cottage: is it needed when planning green spaces. What does the dendroplan of a personal plot include? Standard for drawing up drawings dendrology dendroplan

What is needed for a beautiful view garden plot? You don’t need to direct all your efforts to creating such beauty, but it’s better to find out all the nuances of drawing up a dendroplan. The site's dendroplan is part of landscape design, which is a drawing where the boundaries of the entire territory, buildings, crowns of plantings, contours of flower beds are marked. Dendroplan helps to determine how to compose spatial compositions and give the site an artistic appearance. The dendroplan is the main document with which landscaping is carried out, therefore its second name is the landing plan.

Site dendroplan

Dendroplan is one of the most important design documents that are attached to the landscape drawing of a garden plot. In the photo you can see the dendroplan. Dendroplan makes it possible to take into account important aspects, such as the stylistic direction of the garden, its characteristics, various features landings. Its important component is that the dimensions of plantings on the plan coincide with their maximum size. It is necessary to take into account the distance between landings during the landing, since during the landing their dimensions are not yet equal to the dimensions that are noted in the dendroplane.

Rules for compiling a dendroplan

Consider the rules for compiling a dendroplan:

Characteristics of climatic conditions in the region and soil features

The choice of landings is carried out on the basis of these features, otherwise you will not get a blooming garden. It is necessary to take into account the need for landings in moisture and warmth. You should also pay attention to the existing terrain of the site.

Landing in a dendroplane

Compatibility

Plantings that are selected for planting in the garden must fit into the existing environment, as well as correspond to the features of the buildings nearby, once built or newly built in this area. Through the types of plants and the method of planting them, you can make a shadow in the contours of some objects located in the summer cottage. You can get harmonious and natural naturalness in your garden through careful organization of the territory, which is carried out through structural plant species.

Compatibility

Ignoring the compatibility of plants will not work, because in the world of vegetation there are rules for compatibility. During observance, they are located near other specimens perfectly complement each other. For example, spruce can be planted next to, for example, rowan. As a neighbor to a pine tree, you can plant an oak tree. Larch can be planted next to fir.

Availability

During planting, plants must be provided with freedom of access to them for further care. Plantings should not look boring, and do not try to plant as many varieties of plants as possible. During this approach it is not possible to have a beautiful view of the site. In this case, the compilation of the dendroplan will be ugly.

seasonality

In order for the site to have a flowering appearance at different times of the year, it is necessary to pay attention to the flowering period of the plants that are planted. By selecting unpretentious varieties of plants, you can minimize the care of the cottage, while you do not worsen the attractiveness of its appearance. To do this, you can choose a plant like rosehip, which can complement the style of the site for a very long time through a long flowering period.

Dendroplan drawing details

The dendroplan and the counting sheet are a drawing with the help of which a landscape design plan is drawn up, where all plantings are marked, which will be planted in the summer cottage.

Site marking

The choice of tree varieties is made in such a way that their appearance is in harmony with the style of the garden. The development of a dendroplan should be carried out taking into account the compatibility of seedlings according to their biological characteristics. In addition to plantings, the drawing includes different zones and their boundaries, paths and the location of buildings. That is, you can indicate on the plan everything that should grow in your country house.

The dendroplan of the territory in the country takes into account such important points as:

characteristics of the location and stylistic solution of the territory in the garden;
different features of the landings on it;
soil composition, illumination of the territory, and so on.

Among the characteristics of such a drawing, one can note such important points as: the dimensions of the plantations, which are characteristic of adult plant varieties. This allows you to take into account the distance between landings during landings, since at this time their dimensions are smaller than those indicated in the dendroplan.

When compiling the documentation, it is necessary to draw up a schematic picture of the territory where the vegetation is located. It is designated as a fraction, in the numerator of which the serial numbers of wood are indicated, and in the denominator - the number of plants of this species that are included in group plantings. If the tree is single, then there is no denominator. A properly drawn up drawing of a dendroplan will make it possible for your garden to look great. When creating a dendroplan of a park area, it is necessary to take into account how the whole composition will look as a whole.

Planning

An important point: shrubs that serve as decorative element, should also be useful for the owner of the cottage. In addition, they must carry out the function assigned to them to form the entire territory.

When choosing materials for planting in a dendroplane, such important fact as frost resistance of plant varieties. It must be taken into account, based on the characteristics of the area where the landscape design will be created.

Checklist

The assortment sheet of the dendroplan is a mandatory document included in its kit. It includes a list of planted crops that are most suitable for giving. The landscape designer must certainly take into account the wishes of customers. The dendroplane with the balance sheet basically exist together as one. Such a statement sometimes acts as an application.

The transfer sheet for the dendroplan consists of the following data:

variety and decorative form of trees that are planned to be planted in the garden;
number of each landing;
features of each variety - height, type of root systems, decorative characteristics;
crown projection;
the number of vegetation of each variety;
the name of the plantings in your garden.

The plantings are recorded in the dendroplan's transfer list in a specific order - by category. Among the first group, coniferous varieties can be noted, in the second - deciduous, then - fruit varieties.

A similar document for a dendroplan makes it possible to create in advance a plan for acquiring plant varieties that you want to plant in your summer cottage. In this way, you can avoid the mistakes that many inexperienced gardeners most often make. Thus, we came to the conclusion that such a document with a plan of the territory in your country house or park is a necessity in order not to get confused in the landings and arrangement of the territory.

The conceived image of a plot with an orchard, flower beds and flower beds cannot be created without careful planting planning. This is what a landscape designer does first of all when he draws up a dendroplan of a site - a drawing on which the contours of all green spaces are plotted at the time of their greatest growth. In addition, it depicts the boundaries of the site, functional areas, house, outbuildings and walkways. This is necessary in order to bind the plants in the drawing to hard lines and hard surfaces.

The dendroplan is necessary for the visual representation of the spatial composition of the created landscape, as well as for the implementation of landscaping work.

The development of a dendroplan and the selection of plants for the site must be carried out not only in terms of aesthetics. A rational approach is required, which takes into account both the composition of the soil on the site, and maximum size plants, and climatic conditions. The type of root system of plants, as well as their shade tolerance, is also evaluated.

Several types of plants are usually grown in the garden, therefore, when compiling a dendroplan, it is necessary to take into account their compatibility in the same area. If competing species grow in the same area, the death or suppression of weaker plants cannot be avoided. Therefore, when compiling plantings, a landscaping specialist or landscape designer will certainly strive to form a phytocenosis on the site - a natural community of plants that do not compete with each other.

If you need to draw up a dendroplan of your suburban area, you can do it yourself, having previously studied the material, or entrust the work to a landscape designer. But in order to obtain a permit for new construction, when reconstructing buildings or laying communications, it is necessary to develop and agree on the dendrological part of the project. This is enough difficult task which is best left to the professionals. We advise you to contact Dendroplan.ru:, because. she has been specializing in dendrology services for a long time and really competent specialists work in it.

Symbols on the diagrams

Single plants on a dendroplane look like a circle, the diameter of which in plan corresponds to the crown diameter of a mature tree or bush. Group landings are depicted in the form of geometric figures, which they will correspond to during the period of maximum growth. Each plant in the dendrological drawing is assigned a numerical value. Sometimes it can be in the form of a fraction, in which the numerator indicates the number assigned to the plant in the assortment list, and the denominator indicates the amount of planting material. If the denominator is absent, then this is the designation of a single plant.

The dendroplan of a park or site used for landscaping the territory must be supplemented with an assortment list.

Assortment list - list of planting material

The assortment sheet details all types of plants used for landscaping. This document is a table, in the columns of which are entered:

specific name
height
fit rate
amount

Sometimes recommendations for plant care (watering, lighting, etc.), flowering or fruiting time, and the price of planting material are included in the assortment list.

Plants in the assortment list are recorded in a certain order. First come coniferous trees and shrubs, then deciduous and fruit trees followed by decorative and fruit bushes, and then - climbing, heather and ground cover plants. If there is a rock garden on the arboretum, then the plants that will be planted on it are entered in a separate statement. Annual flowers are also entered in a separate statement, which will fill the voids in the garden until the main ones grow. perennials.

Dendroplan and transfer sheet

To obtain a permit for new construction, it is imperative to develop a dendroplan of existing plantations, with support in the form of a transfer sheet. This is a table describing the trees or shrubs growing on the site.

The bill of lading states:

plant number (corresponds to the number on the dendroplane)
specific name
amount
dimensions (diameter, height)
condition (dry branches, damage, etc.)
further actions (to be cut down or not)
Compensation cost for felling (paid by the developer)

The transfer sheet must be drawn up for new construction, reconstruction or repair of the territory, when it is planned to cut down existing plantations

A professionally compiled dendroplan, which takes into account the compositional and species features of plantings, will allow you to organize the space of the garden and create its structure.

Zoning rules and planning

(as amended from May 26, 2016,
with changes and additions, included in the text,
according to the decrees of the Government of Moscow:

dated March 7, 2006 No. 156-PP, dated May 26, 2015 No. 290-PP)

The rules for the creation, maintenance and protection of green spaces and natural communities in the city of Moscow, approved by the Decree of the Government of Moscow dated September 10, 2002 No. 743-PP, define the requirements for the symbols of green spaces on dendroplans during development project documentation. However, the dendrological plans and green planting lists submitted by design institutes do not have a single approved form, which creates difficulties in their verification.

In order to streamline the submission of documents when developing project documentation, the Moscow Government decides:

2. The Department of Natural Resources Management and Environmental Protection of the city of Moscow should be guided by methodological recommendations (clause 1) when approving project documentation for the construction, reconstruction and overhaul buildings, structures and engineering communications and improvement projects.

3. Moscomarchitecture to bring to the attention of design organizations guidelines(clause 1) for guidance in the development of dendroplans and green planting lists.

4. To impose control over the implementation of this resolution on the head of the Department of nature management and environmental protection of the city of Moscow Kulbachevsky A.O.

Mayor of Moscow

Yu.M. Luzhkov

1. General Provisions

1.1 Dendroplan is a topographic plan showing the placement of trees and shrubs, obtained as a result of a geodetic survey, accompanied by a transfer sheet.

1.2. Dendroplan is compiled:

When developing design documentation for construction, overhaul and reconstruction, including landscaping facilities. In this case, it provides a choice of rational placement of the designed construction objects in order to maximize the preservation of healthy and ornamental plants;

When issuing a passport for an existing object, it serves to visually display the actual location and accounting for green spaces of this object.

2. Dendroplan as part of design documentation for construction

2.1. The development of design documentation for construction, overhaul and reconstruction, including landscaping facilities, is carried out on the basis of a geo-base ordered by the customer in Mosgorgeotrest with an inventory plan of green spaces for the entire building site (appendix to the methodological recommendations).

2.2. Inventory plan - topographic survey with information about the number of trees, shrubs and lawns on the site.

All trees that have reached a diameter of 8 cm at a height of 1.3 m are taken into account.

On the inventory plan, coniferous and deciduous trees of the 1st group (spruce, pine, larch) are distinguished, if necessary, broad-leaved and small-leaved trees can be distinguished.

2.3. On the basis of the received geo-base and inventory plan, the design organization develops a development project (stroy master plan), which determines the main planning decisions and the volume of investments, incl. for compensatory landscaping. At the same time, the volumes of clearings and transplants are determined in general for the development site, and the compensation value is calculated.

At this stage, the number of trees and shrubs that fall into the construction zone is determined without specifying on the inventory plan (without developing a dendroplan).

The inventory plan is valid for 4 years, after which it must be updated by a dendrologist based on the results of a field survey.

2.4. After approval design and estimate documentation for construction, overhaul and reconstruction, including landscaping facilities, a working draft is being developed with clarification of planning decisions, engineering communications and construction organization. At this stage, a dendroplan is developed, on which work zones are distinguished, all tree and shrub plants to be preserved, cut down and transplanted are applied with symbols, in accordance with clause of this appendix.

When developing a dendroplan, the numbering of plants of the inventory plan is preserved.

The form of the dendroplan is given in the appendix to the methodological recommendations.

2.5. The geo-base for the development of the project and the preparation of the dendroplan must be the first copy from the original, because each subsequent copy leads to a distortion of the situation with an error of 0.5 cm on the plan or up to 2.5 meters in kind.

2.6. The construction plan should show existing buildings, structures, planned construction and reconstruction facilities, access roads, crane runways, places for storing building materials, accommodation of residential camps and other temporary structures, utilities indicating the security zone and work area, places for storing vegetable soil , points of a sink of wheels, warehousing of industrial waste.

When developing a building plan, the standards for the distance from structures to the axis of plants must be observed (table 1).

Table 1

Distances from structures to the axis of plants (MGSN 1.01.98)

Distance reference limits	Minimum distance to plant axis, m
Distance reference limits	tree	shrub
outer wall buildings and constructions
Exterior wall of a school building or building kindergarten	10,0
Axis of tram tracks
sidewalk edge and garden path
The edge of the carriageway of the streets, the edge of the reinforced strip of the road shoulder and the edge of the ditch
Mast and support of the lighting network, tram, columns of galleries and flyovers
Slope and terrace base
Sole and inner edge of retaining walls
Underground communications:
gas pipeline, sewerage
heat pipeline, pipeline, heating network
plumbing, drainage
power cable and communication cable
Note: The given standards apply to trees with a crown diameter of not more than 5 m and should be increased accordingly for trees of a larger diameter. When planting trees and shrubs near the outer walls of buildings, structures, children's institutions, it is necessary to observe the normative levels of insolation and natural light.

2.7. The building plan, combined with the dendroplan, is agreed with the balance holder of the territory, the head of the district council, the APU of the administrative district and is approved as part of the design and urban planning documentation in the prescribed manner.

3. Symbols for trees and shrubs on a dendroplane

3.1. The symbols of trees on the dendroplan are used by the standard ones used in Mosgorgeotrest, must strictly comply with the symbols established by the Rules for the Creation, Maintenance and Protection of Green Plantations and Natural Communities of the City of Moscow, approved by Decree of the Government of Moscow dated September 10, 2002 No. 743-PP.

On the dendroplan, existing trees and shrubs located in the area of the construction site and outside it in the directions of engineering communications, roads, etc., are indicated with special signs.

Trees to be conserved are marked with an open circle, trees that are cut down are marked with a full circle, and trees that are replanted are marked with a half-filled circle.

3.2. The size of the tree symbol on the dendroplane is 3.0 mm. Color - black and white.

If the drawing is heavily loaded, the size of the circle can be reduced to 2.0 mm.

3.3. Trees should be specially highlighted on the dendroplan:

Particularly valuable;

historical;

relic;

Coniferous.

The selection of trees is made in the form of an enlarged circle around the tree or in color.

3.4. Multi-stemmed trees are denoted by a single tree symbol.

3.5. Group plantings of trees and shrubs, if it is impossible to designate them with separate circles (in the case of dense plantings), are indicated by an oval, the size corresponding to the area of the site (on a scale) occupied by the group.

3.6. Coppice and self-sowing are designated similarly to shrubs by a contour with the assignment of a serial number.

3.7. The error of placing the symbol on the dendroplan is allowed 1 mm (0.5 meters in kind).

3.8. Each plant applied to the dendroplan has its own serial number corresponding to the number in the transfer sheet.

3.9. Dendroplan can be produced on electronic or paper media M 1:500.

3.10. An example of a fragment of a dendroplan is presented in the appendix to the methodological recommendations.

4. Checklist

4.1. The checklist of green spaces is compiled in the form of Appendix 13 to the "Rules for the Creation, Maintenance and Protection of Green Plantations and Natural Communities of the City of Moscow", approved by Decree of the Government of Moscow dated September 10, 2002 No. 743-PP, with the addition of the details of the object (name and postal address ), order number, correction factors and summing up the totals in accordance with the paragraph of these guidelines (appendix to the guidelines). The transfer sheet is made on paper and magnetic (or electronic) media.

4.3. The first column of the counting sheet indicates the serial number of the tree or shrub corresponding to the serial number on the dendrological plan.

4.4. The second column gives a description of the species composition of trees and shrubs corresponding to the serial number, indicating the multi-stem. Stemness of trees is determined by the number of trunks in the butt part (the place where the trunk goes to the root).

4.5. The third and fourth columns indicate the number of trees (shrubs) recorded under this number. The results for the third and fourth columns are summarized at the end of the counting sheet and determine the total number of woody plants located in the work area.

4.6. The fifth column indicates the diameter of the trees that fall into the work area. The diameter of a tree trunk is determined with an accuracy of 2 cm at a height of 1.3 meters from the ground, accepted for the taxation of green spaces of category 1A (urban parks). The diameter of the barrel is indicated in the counting sheet in even numbers (4, 6, 8 ... etc.).

4.7. The sixth column is filled in if there is inventory data on the age of plantings or, in some cases, on annual rings, the number of whorls in coniferous trees or by taking samples (core) of wood with a drill.

4.8. The seventh column indicates the height of the tree, which is determined by the high point crowns vertically. Height measurement is carried out visually when there is an object nearby, the height of which is known or using an altimeter. The error in measuring the height of a tree should not exceed 2 meters for trees over 5 m high and 0.5 m for trees up to 5 meters high.

4.9. The eighth column gives a qualitative description of the state of the tree (shrub) - good, satisfactory, unsatisfactory, emergency, dead. The shape of the crown, the percentage of dry branches in the crown, breaks of skeletal branches and tops, previously performed types of crown pruning, the presence of root shoots, mushroom bodies, signs of colonization by stem pests, hollows and frost cracks on the trunk, mechanical damage to the bark, the angle of inclination of the trunk from the vertical are indicated. , damage to the root system, branching of the trunk above the butt, etc.

4.10. When large-sized trees are assigned for transplantation, the height of the trunk from the butt to the beginning of the crown is indicated in the state characteristic. The optimal height is considered to be not exceeding 3 - 4 meters.

The higher location of the lower skeletal branches does not make it possible to work on crown formation in the process of preparing trees for transplantation.

4.11. The decision on the preservation, replanting and cutting down of trees and shrubs is made based on the location of the plant on the building plan, its decorative value, trunk diameter, height and condition characteristics and is indicated in the "conclusion" column (ninth column).

Note:

Tree replanting is not possible under the following conditions:

Availability of utilities under transplanted trees (ISS-TLF);

The presence of shells and temporary structures around the trees to be transplanted;

The impossibility of the entrance of equipment;

The impossibility of forming a clod of earth provided for by the norms near thinned trees (high density of plantations, growth of trees on construction waste. Near the foundations of buildings, fences, etc.).

4.12. The last column of the balance sheet contains the following information:

The compensation cost for destroyed green spaces, calculated in accordance with the methodology approved by the Decree of the Government of Moscow dated July 29, 2003 No. 616-PP "On improving the procedure compensatory landscaping in the city of Moscow";

Justification for exemption from paying the compensation cost if trees grow in the area of utilities, in the five-meter zone of demolished buildings, low-value and self-sowing plantations, self-sowing hardwoods have not reached a trunk thickness of 8 cm, or green spaces are subject to cutting down for sanitary conditions (dead, emergency) .

4.13. At the end of the balance sheet, the results are summarized:

Whole trees and shrubs;

The number of trees to be preserved, replanted, cut down with the allocation of the number of valuable and low-value species;

Number of trees and shrubs cut down without payment of compensation cost:

a) in the security zone of engineering communications;

b) in a 5-meter demolition zone;

c) emergency and dry, self-seeding and shoots;

Areas of destroyed lawns, grass cover, flower beds;

Compensation cost for destroyed green spaces;

The cost of compensatory landscaping.

4.14. The transfer sheet indicates the cost of compensatory landscaping for destroyed green spaces, calculated in accordance with the Methodology for calculating the amount of payments for cutting down green spaces and for carrying out compensatory landscaping in the course of urban planning activities in the city of Moscow, approved by the Decree of the Government of Moscow dated July 29, 2003 No. 616- PP "On improving the procedure for compensatory landscaping in the city of Moscow".

4.15. The transfer sheet is signed by a dendrologist and a representative of the design organization, indicating the date of compilation of the transfer sheet.

The transfer sheet is certified by the seal of the design organization.

Attachment 1

An example of a green space inventory plan

Annex 2

An example of a dendrological plan

Appendix 3

Checklist No.

Name of the property _________________________________________________________
Mailing address ___________________________________________________________
Order number _______________ Location correction factor
(Km) _______________________
Water Conservation Value Adjustment Factor (Kv) _______________________
No. p / p	Name of breeds	Quantity, pcs.		Diameter, cm.		Age, see	Height, m	Characteristics of the state of green spaces		Conclusion	Compensation cost is calculated
		trees	shrubs


Total trees and shrubs __________________, incl.
To be saved:					trees ________				bushes _________
To be transplanted:					trees ________				bushes _________
To be felled:					trees ________				bushes _________
Of which: on engineering communications					trees ________				bushes _________
in 5 meters zone					trees ________				bushes _________
emergency and dry					trees ________				bushes _________
									bushes _________
self-seeding (up to 8 cm)					trees ________
The area of the destroyed grass cover / lawn / _________________________
The area of destroyed flower beds ____________________________________________
Compensation cost _________________ rubles
The cost of compensatory landscaping ______ rubles
Dendrologist ________ Representative of the design organization ____________ Date _____

Appendix 4

Calculation of the compensation cost for destroyed green spaces and the cost of compensatory landscaping

Appendix 4 is no longer valid in accordance with the Decree of the Government of Moscow dated May 26, 2016 No. 290-PP.

Even at the beginning of the design of buildings and structures, among the priority preparatory work it is worth including the compilation of a dendroplan and a green planting list - a special topoplan indicating data on the location of trees and shrubs on the territory. It is important to consider already growing plants for the development of a master plan for the construction. There are certain standards for the distance between green spaces and construction sites, but it is impossible to maintain them without a dendroplan. Also, our geodetic engineer works with and.

You can order a dendroplan, the price of which is quite affordable, from GeoGIS LLC.

The development of a dendroplan takes place in several stages:

Shooting of all plantings in the territory and compiling a counting sheet (up to 10 days).
Estimation of the cost and necessity of cutting down plantings. Making decisions on making changes to the further landscape project of the site (Time and timing depend on you).
Final stage. Making a dendrological plan taking into account the decisions and wishes of the customer (up to 5 days).

Dendroplan: features

Competently compiled dendrological plan includes complete information about green spaces, their number, types and varieties. AT without fail each tree and bush is assigned an individual number, which must correspond to the counting sheet. The diagram will certainly display the boundaries of the site, zoning, as well as all objects - a cottage, outbuildings, roads and paths. He also specializes in geodesy, geology and ecology. On our site you can access all the services provided.

The following points are required to be indicated on the dendroplan scheme:

location of the land plot;
biological and ecological characteristics and features of plants growing on the site;
composition and properties of the soil;
illumination;
customer requirements.

All this information is extremely important for linking green spaces in the drawing to lines and hard surfaces. This drawing is needed for a visual representation of the spatial composition of the future landscape design. It is also often required to perform work on spectacular landscaping.

When is it important to have a dendroplan and a green space checklist?

The question is often asked: in what cases is it necessary to develop a dendroplan? The document is required if, during construction work or restoration, there are plans to replant or cut down green spaces.

Also, the development of a dendroplan and a transfer sheet in Moscow is needed in such situations:

to perform works on landscaping of the land allotment;
if necessary, obtain a conclusion and a felling ticket from the controlling authority.

Developers are required to pay compensation costs for damaged and destroyed trees (for each plant). The legislation provides that the builders as a result of the work must carry out comprehensive measures for landscaping the site in order to compensate for the damage caused by environment. In addition to the development of the dendroplan and the counting sheet, our specialists perform the full range of services in geology, geodesy and ecology.

The nuances of the design of the dendroplan and the transfer sheet

Novice developers often believe that compiling a dendroplan is nothing more than a waste of time and money. But, in fact, only qualified specialists with relevant experience can engage in such work. There are many subtleties that are important to consider when developing a dendroplan. Today, the arboretum plan and the green space counting sheet are mandatory for a package of documents when designing a building. The most relevant dendroplan when repairing landscaping objects on a specific land plot. An indisputable plus of the scheme is that all construction objects are rationally placed on it, which ensures the safety of trees and other plants.

When developing a dendroplan, such a mandatory accompanying document, as a counting sheet, including a complete list of trees that are planned to be replanted, saved or cut down.

The list of green spaces contains the following information on plant groups:

Plant number (according to the inventory plan).
Name (in Latin and national languages).
View, decorative form.
Age.
Root system type, crown projection.
Size (height).
Diameter.
State.
The decision of the designer on the need to transplant or cut down a tree (shrub).

Depending on the goals set by the customer, there may be other characteristics in the transfer sheet.

Important: it is such a document that allows a specialist to find out the important characteristics of each plant, calculate its compensation value. Only after these works is it possible to correctly compile a list of plantings that interfere with the construction of an object, and draw up a plan for planting new plants.

Conditions for the development of a dendroplan and a green planting list

At the very beginning, specialists use a special program to compile a reliable cartographic landing plan, with the most accurate distances taken into account. It is also important to keep the gaps between the trunks of neighboring trees. Further, such a geodetic service as tree topographic survey is implemented. In the case when the site is selected for development, it is important to draw up a dendroplan and order engineering and geological surveys, as well. All this will help to avoid unnecessary financial expenses during construction.

List of documents that will be required to order a service from GeoGIS LLC

When submitting an application for the preparation and approval of a dendroplan and a transfer sheet by qualified specialists of the GeoGIS company, it is required to have the following source documentation available:

on a scale of 1:2000 (mandatory indicating the boundaries of the site where the work is being done);
(in modern digital format);
permits.

In the presence of a complete package of documents, the dendroplan and the transfer sheet will be executed with high quality and in deadlines. It is worth considering that it is quite possible to develop a dendrological site plan even if only one tree grows within it.