How to install a latch door handle. Handles for interior doors: how to choose and install

After the door is mounted, you need to install door handle. Despite the simplicity of the product, it is not so easy to install it. In order not to spoil the product and the door, it is necessary to follow the rules and assembly sequence, because each variety is assembled and installed in its own way.

Types of handles

Handles can be divided into 2 types:

stationary;
working together with a lock or latch.

Stationary - the simplest. They do not have complex mechanisms, the handle is motionless and moves or scrolls only when the thread is loosened or something is broken. The installation of such a handle on interior door do it yourself is easy enough. Most of them are attached with screws. For a more aesthetic look, make a pot for the self-tapping caps and insert decorative buttons that hide the heads. The through type of connection provides for the presence of a threaded stud. You just need to drill a through hole at a height of 80-90 cm, screw the pin into one handle, put it through the hole and screw the other half of the handle.

Installing a latch handle on interior doors is more difficult than harder design locking mechanism. They can be divided into 2 types:

rotary;
pressure.

The first type includes ball-shaped handles with the simplest latch. They are also called knobs.

The material and coating of the handles can be any: plastic, metal, wood, glass. The most common are metal with sputtering, chromium plating, nickel plating, etc. The strength and durability will depend on the material. Everyone can choose accessories that meet their needs and desires.

In order to understand how to install a door handle, there is no need to delve into the details - it is enough to consider the installation process.

Installation order

As an example, the installation of door handles with a latch is chosen. Round and oblong are installed in the same way.

To install we need:

hand drill or screwdriver;
wood crown with a diameter of 50 mm;
drill for wood with a diameter of 22-25 mm;
chisel;
hammer;
pencil.

The standard for the height of the handle is 80-90 cm from the floor. Usually it is installed at the level of the belt. It must be borne in mind that for all doors you need to choose the same height, otherwise it will look ugly.

The height must be marked on the door leaf at the end and side. At the end, mark the center in order to subsequently drill a hole for the latch latch. To correctly mark the drilling location on the side of the door, measure the distance from the edge of the latch to the middle of the hole into which the square is inserted. Transfer this length to the side of the door.

After marking the centers, we proceed to drilling holes. To do this, you will need a drill, a thin drill (2-4 mm) and feather drills (22 and 25 mm). We need a thin drill in order to set the guide. When drilling with a pen drill through the exit side, chips are formed. To avoid this, it is enough to make a hole with a pen half the thickness of the door, and then start drilling from the back. To do this, we need to make a guide with a thin drill. The first hole is a side hole with a diameter of 25 mm, the second is made on the side with a diameter of 22 mm.

For those models that have 3 additional screws in the kit for attaching the base to the door leaf, it is not necessary to drill a large hole with a crown. It is enough to make a hole for the “square” with a pen drill with a diameter of about 12 mm and holes for the tightening bolts. This design will last longer.

Now mark and make a sweat under the latch. To do this, insert the latch into the end and circle the outline of the bar. Then you need to choose a groove for the bar. Make it better with a milling machine. If one is not available, you can get by with a chisel. It is enough to go deep into the thickness of the bar.

Now installing a handle on an interior door will not be a big deal. All that remains is to assemble the doorknob inside the door leaf. To do this, clean the hole from dust and chips, insert the latch and fix it with self-tapping screws. However, you should not be zealous and clamp it too tight, because otherwise it can jam.

Now thread the square through the latch hole. Then put on the handle. Both left and right handles are included, so make sure you insert them correctly before screwing them on. After installing the handle with a lock, screw the handle with three screws to the door leaf.

Also mount the second handle. After assembly, check whether everything works correctly, whether the latch moves, whether it slides in to the end and whether it wedges. At the end, decorative caps are screwed on to hide the fasteners. On the bottom of the handle, there is usually a hidden hex screw to secure the caps.

If you have a round pen, insert a rod into the hole. It has grooves on both sides. There are also grooves on the handle that should match with each other. Put on and press until it clicks.

Lever handles can be mounted on both left and right doors. To change, you need to remove the cylinder mechanism and the locking mechanism from the handle body and swap them in accordance with the side of the door opening.

Strike plate and recess for the lock

Installation of the door handle on the interior door is completed. It remains to make only the final touch, namely, to cut the mating part of the latch into the hole. The first step is to mark the center of the latch. To do this, close the doors not too tightly and draw a pencil at the required level. You can also close the door tightly and open and close the latch several times to leave marks. Now in the middle of the loot, select the groove. It shouldn't be deep. Measure the latch length at the very great place and choose 1-2mm smaller.

Under the lock, the groove is selected deeper and larger. It all depends on the castle itself. Sometimes the kit may include a plastic overlay in the groove - it must be inserted before the bar is fixed.

A decorative strip is attached over the groove. There is no need to cut it flush. It is enough to fasten with self-tapping screws or nail with carnations. It remains only to check if everything works correctly. This completes the installation of handles on interior doors.

Handles with a lock are installed according to the same principle. The difference will be only in the diameter of the end hole.

Mounting on sliding doors

When installing handles for sliding doors you need to have a drill, feather drills, simple drills and a milling machine with a cutter in the form of a cylinder. The handle is an oblong tab that goes deep into the door. As in the previous case, you need to decide on the height of the location. Then circle the plastic liner with a pencil on the door leaf.

Using a drill with a 25 mm spade bit, drill holes to a depth of 13 mm very close together inside the contour. Then select everything with a chisel or chisel. If you have a milling machine, do it with a milling cutter. So the hole will be neater. Now insert a plastic insert into the hole and fix it with self-tapping screws or screws. Put a pad on it and press until it clicks.

If you have a round handle for sliding doors, then your task is greatly simplified. You only need to make a hole with a drill of the required diameter. Further, everything is the same as with an oblong handle. Sliding doors can also be fitted with a lock or end catch.

Despite the apparent simplicity, installing a handle on an interior door can be tricky. And if you are not sure about anything, it is better to contact specialists or someone who has experience in such matters. After all, a mistake can ruin your door or handle.

This article will help you figure out how to embed a latch handle into a door leaf. Adhering to the work algorithm described in the article, you can easily do this operation yourself, with minimum set tools and very quickly.

No door is complete without a handle. The most popular type of interior door handles today is the latch handle.

The design of handles of this type is such that, regardless of their appearance, they are all installed in the door leaf in the same way. How to do it yourself will be discussed in this article.

Latch handle design

The pen itself, that is, the visible part of it, may look completely different. So:

or like this:

All these latch handles consist, in fact, of two parts - the handle itself:

and latch mechanism:

Both parts of the latch handle require a separate insert into the door leaf.

Latch handles are available without a latch - the door with such handles is not locked from the inside, with a latch - an additional rotary mechanism installed on the handle and allowing you to lock the door from the inside, and a key - on one side of the handle there is a turnkey mask that allows you to lock the door from the outside, on the other, a latch . All handles have design differences that do not affect the tapping process. The inner part (latch) is also the same, that is, it cuts in the same way for all types of latch handles.

So let's get started.

Required Tool

To make the installation of the latch handle as easy as possible, you will need:

Hand drill or screwdriver.
Crown on a tree with a diameter of 50 mm.
Drill for wood with a diameter of 23-24 mm.
Chisel.
Hammer.
Pencil.

The crown and drill can be bought separately, or as a set, which is called the “Set for inserting latch handles”.

Installing the latch

1. We begin the installation process by marking the door leaf for drilling. The marking scheme, as a rule, comes with the handle.

If there is no scheme, then you can mark it manually. To do this, put a mark at a distance of 60 mm from the edge of the door.

2. On the side edge of the door along the axial marking line, mark the center for drilling.

3. Using a chisel, we hollow out a three-millimeter recess under the front latch plate. It makes sense to pre-mark the center with an awl so that you do not have to mark it again.

4. We drill a through hole with a crown with a diameter of 50 mm. It is better to do this on both sides of the door in order to avoid damage to the door covering at the exit of the crown when drilling.

5. As a result, we get such a hole:

6. Go to the side edge. With a drill for wood with a diameter of 23-24 mm, we drill a hole for the latch into the marked center. You should not make it too deep, otherwise you risk drilling the door through to the panel.

7. We already get two holes.

8. Install a latch in the side hole and screw it with self-tapping screws.

9. Remove the top of the handle. To do this, we are looking for a hole on the side.

Using the supplied key or any other thin flat object:

press the tongue inside the hole:

and remove the handle itself:

10. Remove the decorative trim and, thereby, open the mounting holes.

11. Insert the outer half of the handle.

12. Insert the inner half. We tighten both with the screws that come with the kit.

13. We put on a decorative overlay and a handle body. Do not forget to press the inner tongue with the key.

14. With the door closed, we mark the place where the latch tongue of the door jamb touches, after which we hollow out a recess under the latch tongue in the resulting place.

15. Insert a decorative plastic pocket.

16. We fasten the metal plate.

17. The handle is installed.

If there is no drill, then all holes can be made using a suitable chisel, however, in this case, installing the handle will require more serious repair and construction skills and can be an impossible task for an unprepared person.

This article will describe the work being done on installing latch handles on interior doors, which are by far the most popular in use.

The latch handle has the following design.

The visible part of the handle can be perfect different kind and it might look like this:

Or this way:

All such latch handles basically consist of two parts, from the handle:

and latch:

Each of these parts of the latch handle requires a separate cut into the canvas.

There are different types of latches on sale, with a latch that have an additional mechanism installed in the handle itself, which allows the door to be locked from the inside, and from the outside on the handle there is a mask for a key that allows the door to be locked. Also, such handles are available and without a latch they are not locked. Latch handles from different manufacturers have various design features that in no way can affect the process of inserting into the web. The weight of such handles has a latch on the inside, so the whole process of installing the latch handle is the same for everyone.

Therefore, if there are any differences, then because of this you should not doubt much and you should gain courage and begin to work. And you should start with the preparation of tools.

To do this, we need tools to work.

Screwdriver or hand drill.
Crown with a diameter of 50 mm on wood.
Reduced the size of 23-24mm on wood.
Pencil
Chisel
Hammer

In order to maximally facilitate and speed up the process of installing the latch handle in the door leaf, you can purchase a special kit in specialized stores.

Starting to install the latch

1. In order to proceed with the installation, it is necessary to make markings for drilling from the beginning on the canvas. If you purchased a special set for inserting such a latch handle, then this set already has a marking scheme.

If you do not have such a scheme, then the markup can be done manually. Why, at a distance of about 1 meter from the bottom of the door leaf, we make a mark, then along this mark from the edge of the leaf we measure 60 mm and make a mark for drilling, as shown in the photo.

2. On the side of the door leaf, we also find the center and make a mark for drilling.

3. Next, we take a chisel and for the front plate of the latch on the door leaf we hollow out a recess equal to 3mm. It is better to drill the center of the thickness of the door leaf with a slightly thin drill, so that later you do not have to make markings again.

4. With a crown with a diameter of 50 mm, we make a through hole. It is better to make a through hole on the door leaf on both sides so as not to damage the leaf.

5. As a result of the manipulations done, we get a hole.

7. As a result, we get several holes on the door leaf.

8. Insert the latch into the hole on the side of the door leaf and screw it.

With the help of a special key that should be included in the kit or any thin and flat object.

We press in the hole on the tongue.

and remove the handle.

10. After the handle, remove the decorative cap and expose the mounting holes.

12. We insert the other half, after which we tighten both halves of the handle with the screws that come with the kit.

14. We cover the door leaf and mark the place where the tongue touches the jamb, in this place we hollow out a recess for the latch tongue.

15. A plastic pocket must be installed in the hollowed out recess.

16. Install a metal lining on top of the plastic pocket and screw it on.

As a result of the work carried out, the latch door handle is installed, now the door is ready for operation.

At what height should a door handle be installed?

The handle is an important part of the "pie" of the interior door, because the comfort and ease of use of the entire structure will directly depend on the correct installation and choice of it, and the Dverka interior door hypermarket will help with this. Most manufacturers offer doors for installation with existing handles and other accessories included.

The height of the handle in this case is standard and, in accordance with GOST, is 100 cm from the floor.

If the handle is not installed, models may or may not have grooves for attaching it. In the second case, there is a special bar in the area of the intended fixation, which allows you to install handles and a lock quickly and easily.

Here the height is determined independently, but the “limit” of indentation up and down should not exceed 10 cm.

A height of 100 cm is focused on a person with a height of 170 cm. But given that this parameter can vary significantly, the best option is to purchase a door without fittings and marked grooves and fix the handle in the place that the best way will suit everyone living in the house.

Peculiarities

To finally determine the appropriate height, you can follow the following rules:

By the wrist. It is necessary to come close to the door, lower your hands along the body. At the level of the wrist, make a mark and step back up 20 cm.
The resulting height is optimal for the person who took the measurements.
Elbow. Everything is simpler here: with a close approach to the door, the notch should be made at the level of the elbow.

If you use both methods at the same time, the result should be approximately the same in the end.

There is no need to make such measurements for each door. It is enough to set a mark on one, measure the resulting distance and measure it on other interior doors of the house.

Pen in the child's room

The height obtained as a result of the above measurements by an adult is not suitable for children - the child will not reach the handle.

On the other hand, an additional groove will negatively affect the aesthetic appearance of the structure. The best option- use the push mechanism of the handle and attach a cord to it.

The child pulls the cord - the door opens without difficulty. When the children grow to a suitable height, the lace is untied.

It is worth considering that the correct height of the handle is not the only important point.

Installing the mortise door handle

The element itself must be of high quality and reliable, easy to press. Especially for children. It is worth checking this point during the purchase. Only in the amount of product quality correct fastening will provide convenience of use of an interroom door.

Expert of the hypermarket of interior doors "Dverka" http://www.dverkadverka.ru Zakirova Victoria

How was the handle fixed on the front door?

All handles on the door, during operation, have the property of stunning and breaking.

Their repair is not so strange, and it will also apply to those who take it for the first time.

There are two ways to fasten the door: screw, through the recess and screws - self-tapping screws. Therefore, repairs cannot be expensive, and it does not require huge efforts to use them.

What tool should I stick to before I start repairing a pen?

First you need to buy a set of screwdrivers or screwdrivers and bits.

By the way, it will be much more convenient and faster to make fasteners.

You will also need a set of screws.

Fixing a broken handle attached to a fork

By connecting two equal parts of the handle on both sides of the door.

This applies to spherical or conical products.

For types presented by the carrier, the elements are installed separately. This means that half is broken, then it is repaired, and the other is in place.

The handle is then removed when the door is opened, holding the hand halfway and the other in the hole.

All design details must be entered manually.

The handle half then detaches and gets the fork set to the desired length.

How to install a latch door handle

In the same way, the whole structure turns back, here it is clean without a special tool.

Technical repair mechanism fixed in the form of brackets

In this case, you will need to buy a screwdriver or screwdriver. It should be noted that transverse bolts are better and stronger than straight ones.

The door handle is moved to cover the old grooves. Then, on the opposite side, two pairs of bolts are attached to the new holes.

Press firmly so you don't have to slide.

The top parts are also installed with screws - screws with drilling new gutters. The overlay can be attached as a square or a diamond. At the end of the work, the application is fixed.

Characteristics of the replacement of small parts parts

When replacing the spring part, the new part is strongly compressed from above, the veneer facing is installed, the veneer ring is attached and connected to the screwdriver.

Then, a delicate screwing of the rotating mechanism is performed, followed by the introduction of a spring element into it.

The button is turned by the key.

In cases where cake repairs have not been successful, it is much easier and cheaper to buy a new product.

home »Inside» How to open a door lock without a key

How to open an interior door lock without a key

Sometimes it happens that the inner door is closed and the key is missing.

You do not want to break the door leaf, because it is quite expensive, and calling a master will be an additional cost element. So, how to quickly and safely open the door without a key to the design itself?

For what reason can the doors be extinguished?

Internal door lock

Before you start opening the neck structure right away, you must state the reason why it was destroyed.

As a rule, this situation can arise for the following reasons:

The lock in the handle is simply stuck or it has turned off.
The latch is locked.
The jammed tab located in the locking mechanism is stuck.
On the other hand, there was a key in the cavity, which does not allow opening the lock.

If you want to pinpoint the cause, you need to use a wide screwdriver.

With the help in different places, the door leaf rises. You need to pull it out a little, and then it becomes clear where it is. Once you find an error, you can fix it.

Defective latch - what to do?

Typically, bolt failure causes unauthorized door locking.

This item may not move completely. Even when you press the pen all the time, the tongue keeps running out. If the door is too attached to the frame or slammed shut, they can no longer open.

If so, you can do the following:

Using a simple screwdriver or other hard object, gently squeeze the design fabric out of the box and gently lift it up while doing so.
In addition, to eliminate the possibility of such situations in the future, it is not superfluous if you want to spin the lever and see what is wrong with the language.
In case of need and option, it is better to replace the wrong product with a new one.

The language was not successful

There is also a situation in which the door structure of a door that is locked does not open after repeated use.

Even if the round handle is not equipped with an additional latch, but the lock cannot be opened in the usual way, the tongue is most likely the cause of the failure.

To solve this problem, you can use a sharp tool that easily goes into the gap between the box and the door.

Then, to open the interior door lock without a key, you must follow the steps shown in:

Carefully place a ruler in a slot, plastic card, office material, or regular knife.
Orientation to the part of the door on which the door handle is installed.
The tool used to open the tool should be slightly tilted and pressed down.
How to install a handle on an inner door: Photo.

It needs to be pushed so that it can come into contact with the cut part of the tongue.
Tilt a knife or other improvised device towards the door leaf while the tongue is completely hidden in the lock. During the implementation of such measures, the handle must be in the lowered position than in the figure, and the wing must be extended in the direction in which it normally opens.

If you follow all the above rules, the keyless door will open effortlessly.

Locks on the inner door: their main functions

Before opening a doorknob without a key, it will not be superfluous if you find out what functions such mechanisms have.

Only with everyone necessary knowledge and skills to solve this problem will be much easier:

Modern manufacturers could not ignore unauthorized stagnation in the doors. That's why they created a special door lock that has a lock on one side and a special opening page (button) on the back.
If the moment when the door needs to be urgently opened without the use of a key, it is enough to insert a rigid rigid object (for example, an anchor) into the hole to open the mechanism.
If there are doors with a glass frame, then in the case of a ridge, they can be carefully removed and entered into the room.

The situation could be big.

But if you can’t deal with the blocked lock yourself, it’s better to call a professional master who will solve the problem in a matter of minutes.

Add a comment

Installing a handle in an interior door with your own hands - instructions on how to install a handle

Interior doors and accessories for them, including handles, are sold separately.

Accordingly, there are no holes for installing handles in the interior door. This happens for the reason that the handles, although standardized, are still different in design and installation dimensions. Here you can do it in two ways, either call a carpenter, or install the handles on the interior door with your own hands.

So, we install the knob-knob in the interior door. This is the most common type of handles, in my opinion, the most suitable and convenient for interior doors.

Before proceeding with the installation of handles, it is advisable to remove the door from the hinges.

If there is no one to help you, then you can not shoot. But you should prepare a chair or stool so that you can fix the door, i.e.

she became immobile.

To install the handles, you will need a drill, a feather drill, a ruler (preferably a square), a hammer, a chisel and a hole saw for large holes (see photo).

photo is red).

Fig.1. To install handles in an interior door, you will need the simplest tool that every home has: a drill or a screwdriver, a chisel, a feather drill with a diameter of 23 mm or a Forstner drill, a wood crown with a diameter of 54 mm.

First of all, we determine the installation location, or rather, the installation height of the handles.

There are no strict restrictions in this regard. Typically, the height of the handle from the floor ranges from 1 to 1.2 meters. This height is sufficient for both adults and children.

They are different for different pens. In addition, they depend on the thickness of the interior door.

Also in the instructions, as a rule, there is a template for installing handles, where all geometric parameters are indicated. We will be mainly interested in the dimensions of the holes for the pawl, the handle itself and their relative position. The diameter of the feather drill and crown depends on these dimensions.

Therefore, the necessary tool must be bought after buying pens.

It is important to note that the drill and crown must be purchased with a diameter equal to the diameter of the hole in the instructions for installing the handles. If you use a larger tool, then it is likely that the decorative overlay will not close the hole. If it's smaller, then the handle just won't fit. At the same time, remaking holes for a larger size is very laborious and problematic.

Much easier and faster to do everything right at once.

Now you can directly proceed to install the handle in the interior door. For this, holes are marked for the handle itself and the dog. For these purposes, it is convenient to use a ruler as in the photo.

Fig.2. Relative to the end of the door, the handle can be displaced by a distance of 60 - 70 mm.

At this distance, mark the place for the hole for installing the handle.

Fig.3. First drill a hole for the handle.

To do without burrs and chips on the door, proceed as follows. First, a hole is drilled with a drill with a diameter of 5-6 mm. Then, with a crown, an incision is made on one side of the door with a depth of at least 5-10 mm. After that, a hole is drilled with a crown on the other side of the door.

Fig.4. At the end of the door, at a height where the center of the hole for the handle, mark the center of the hole for the latch, and make a hole using a feather drill.

The latch has a platform 2-3 mm thick. To ensure that the door closes well under the platform, a groove is cut with a chisel. It is convenient to first drill a hole, then insert the latch and mark the groove along it, and then cut it out with a chisel.

After the holes are ready, insert the dog and circle it with a pencil.

And with the help of a chisel we make a groove. This groove is necessary so that the pawl platform is flush with the door and does not interfere with opening and closing.

Fig.5. The installation of the handle begins with the installation of the latch. It is inserted into the groove and secured with screws that come with the handle.

Wrap the screws carefully and do not break the notch for the screwdriver. To simplify screwing, you can pre-drill holes for self-tapping screws with a drill with a diameter of 3-4 mm.

This groove can also be made using a milling cutter. But for this you need to pre-make a template, which is not advisable for a “one-time” installation of handles.

After the preparation is completed, install the handle on the door and wrap the screws.

Fig.6. The last step is to install the handle mechanism.

One half of the handle is installed in the latch groove. The halves of the handle are connected with screws.

Installing a door handle-lock in an interior door

It is important not to overtighten the screws, otherwise the handle may wedge.

As can be seen from the description, the installation of handles in an interior door is very simple. It is important not to rush and make the right markup. After that, holes for installation are made with special drills, a groove for the latch is cut out, and the handle is installed in place.

On average, the installation of handles takes about 20-30 minutes.

Home cosmetics

Install the handle on the inner door with your own hands

It is hard to imagine how to use an interior door without such a mandatory attribute as a handle.

At first glance, its installation can be complicated. However, with a serious approach to the task, you can independently manage the presence necessary tools and materials and proper organization of work with this task. In the presented material, let's see how the handle is installed on the inner door.

Handle types

There are several types of cranks that are suitable for insertion into an inner door:

rotary;
with pressure mechanism;
without locking mechanism.

Stationary handles, which do not have mechanical operation, allow the door to be opened by pulling.

As far as pressure systems are concerned, these shutters are made in the form of a lever. In the process of pressing such a handle, the lock tongue moves inward, which allows you to open the door.

What is an oval handle door handle? Installing this system allows you to open the door without pressing the handle. Due to the circular shape of the handle, the operation is performed by turning the handle. The design can be equipped with a lock button that allows you to lock the language of the lock language.

Thus, the door can be locked from the inside.

Tools and materials

What does the installation of handles on the inner door require? Self-assembly may require the following tools:

Measuring measuring tape;
pencil;
Manual or electric drill with a pen-shaped nozzle;
screwdriver;
chisel for woodworking;
hammer.

Interior door handle height

Before inserting a lock into an interior door, you must determine the optimal location for installing the handle.

To do this, it is enough to simulate the opening of the door in order to consider what height is most suitable for each individual user. As practice shows, right decision is to place the handle on the inner door at a distance of at least 1 meter from the floor plane. The presented images are optimal for both adults and children.

Cutting holes for handle

After you find the necessary tools and determine the location of the building, you can proceed directly to creating a hole for installing the mechanism.

First, mark the height of the future handle on the plane of the door and its end. This is necessary to determine the exact location where the hole will be punched with the double sided drill bit.

In order not to interfere with the calculations, it is enough to take a blocking mechanism, and then, using a tape measure, we measure the distance from his eye to the visible edge.

The parameter must be marked at the pre-selected height on the door leaf. As soon as the appropriate marking appears, you can continue to select the appropriate drill material.

At the end of the holes you need the diameter on the plane and at the end of the door leaf, here you need to attach the opposite parts of the handle structure.

If the thickness of the plane does not allow installation, excess wood should be removed with a chisel. Then you need to scrape the fabric on both sides until the handle engages.

Bolt Assembly

After completing the previous work, the latch should be installed in the prepared hole. Installing doorknob handles on an interior door involves attaching it to the door leaf in an open hole using fasteners that are attached to the product kit.

It is appropriate to work with a screwdriver.

How to install a handle on an interior door

However, in the absence of the latter, you can use a regular screwdriver.

After strengthening the key part of the structure, it includes a core for a long time, which is reinforced with a screw. In order not to have problems with the base assembly, the key must be inserted in advance by moving the mechanism lock mechanism to the closed position. Only then should the screw be tightened.

Installing a door handle on an interior door

Direct insertion of the handle into the pre-assembled structure is the simplest work step.

It is enough to insert a square rod into the corresponding hole of the locking mechanism.

The next step is to secure the handle with a buckle to one side of the door. To do this, you can use self-tapping screws or use zip ties. Once the first handle has been successfully assembled, similar operations must be carried out with the other part of the structure, which must be installed on the back side of the door leaf.

This will establish a connection between the two elements of the system.

Installing the keypad insert in the door frame

In order to install the handle on an interior door, it is considered ideal, it is necessary to make an appropriate hole to enter the locking part of the lock in the door frame.

Do not use calculation errors that allow you to use toothpaste on the tab along the vertical edge. When the door leaf is closed and the handle is released, the blocking element is connected to a part of the box.

The remaining toothpaste label will tell you where to make the hole under your tongue.

Using the method described above is the best solution to determine the correct position of the panel. Experts also resort to this causality.

The formed imprint from the protruding tongue of the neck should guide a stable outline with a pencil. Then use a drill and chisel to enter the hole in the cork, then a metal plate with a hole.

In advance, you also need to place holes for fasteners in order to secure the plate to the door of the door.

When you have created all the necessary holes, it is enough to fix the plate in the appropriate section. In order to fit snugly on the door lid, the metal element must be screwed tightly to the wood surface.

At the end

Therefore, we looked at how the handle is installed on the inner door.

This material provides an example of how to cut a simple mechanism into a wooden plan. Now you have enough knowledge to solve your problem on your own, without resorting to external help.

The handle is a necessary element of door fittings, designed for convenient opening of doors. Practicality door structure largely depends on the external aesthetic appearance, design features and functionality of this accessory. With constant use of the door, the handle, regardless of the material and type, often becomes unusable: it wears out, breaks. Therefore, in case of any malfunction, it must be repaired or replaced with another one. In order not to call the wizard, you can perform this procedure yourself.

Brief instruction on how to disassemble a doorknob will acquaint the reader with this simple process.

According to the installation method, there are 2 types of handles:

invoices;
mortise.

Overhead fittings are installed on the door leaf using a strip; for a mortise design, a hole in the door is required.

By appointment are:

input;
interior.

By functionality, door products are divided into 2 types:

mobile;
stationary.

Movable handles are available in 2 versions:

rotary (knobs and buttons);
pressure.

Parsing the door handle depends on its type and design features.

Design features

Stationary handles are produced without latches and locks. The elements of fastening to the door block are screws or self-tapping screws. Such fixed structures are decorative in nature, they serve exclusively for the movement of the door. They can be 1-sided or 2-sided of various shapes, connected by an axial element. They are installed on interior or plastic balcony door blocks, rarely - at the entrance.

Pressure products are 2 L-shaped levers, which are connected by a rod passing through the door block. In such a device, when turned, the latch tongue enters the inside of the door and locks it. With the help of elements, external and interior doors are mounted.

The main advantage of the model is its reliability. The failure rate of pressure mechanisms is much lower than others.

The rotary mechanism is most often made in the form of a ball or button with a diameter of 50-60 mm with a lock located in the center of the round handle. The keyhole can have a 2-sided exit or 1-sided with a latch. The door opens with a simple twist. Such fittings may also contain a door lock. Therefore, they are often used in the door structures of bathrooms and interior blocks, and are also called knobs-knobs.

They are compact, easy to install, low price, but have such disadvantages as low strength and fragility due to jamming of spare parts inside the mechanism.

Rotary and pressure products differ in the shape and method of opening the latch.

Components of the mechanism

Rotary and push door products for interior doors have the following spare parts and parts:

latch;
strap or socket;
decorative flange;
fasteners;
a special key for pressing and removing the mechanism.

Keyhole door hardware kit comes with keys.

Required Tools

In order to remove the interior door handle, you need to prepare the following tools:

drill;
pen drill;
cutter;
flathead screwdriver or screwdriver;
roulette;
marker;
chisel;
hammer.

How to withdraw

Dismantling door hardware is not a problem if you have the necessary tools and minimal theoretical knowledge of the mechanism. You can remove the door handle of the interior door yourself without calling the master. To do this, follow the instructions:

Support and secure the door in a stationary position.
Pry off the decorative flange with a knife and pull it back a little. Under it are fasteners that need to be unscrewed.
On the decorative flange of the pressure device is a spring-loaded locking pin. Push it in with a screwdriver. In rotary models, the pin is located inside the housing. In order to get to it, insert a wrench or an awl through the technological flange hole. If the pin is not palpable, rotate the flange until it contacts it.
Press the pin while pulling back on the door unit.
Loosen the fixing screws.
Separate the inside of the door element from the outside, remove the handle and decorative flange.
If it is necessary to remove the latch and replace it or repair it, unscrew the screws fixing it to the side of the door unit, remove the bar, then the mechanism.

When installing accessories in another place, it is not worth disassembling it for spare parts. It is attached to the door structure in the reverse order. If the handle or latch is to be repaired or replaced, further disassembly is carried out.

How to disassemble a door handle

Replacing the door handle is carried out in order to repair it due to breakdowns, wear, in the presence of scuffs, scratches, to improve the appearance, as well as with a complete replacement of the door unit.

Before starting work, the type of mechanism, its features, are established. one model with simple device are easy to disassemble, and some have more complex elements, such as latches with latches. It is difficult to carry out such work. Therefore, it is necessary to consider the replacement of each type of door hardware separately.

Round

To disassemble a round door handle or knob, you must follow these recommendations:

Use a hand tool to pry off the decorative flange or escutcheon with a simple keyless swivel lock.
With an awl, nail or special key, press the opened stopper.
At the same time, gently pull the handle and remove it.
From the side of the removed part, unscrew the bolts from the mounting plate and disconnect it from the door leaf.
Unfasten the cylindrical mechanism, the latch.
Remove the screws, detach the tab.

If there is no need to change, it is rearranged. It happens like this:

Insert the latch so that the beveled part of the tongue faces towards the closing of the door.
Fasten with 2 screws.
Insert the part of the fittings with the key drum on the other side of the door structure.
Attach the clamping part and fix with 2 screws.
The handle should turn without jamming and return freely to normal.
Correct it. To do this, you need to carefully hold one side and align the other.
Attach decorative trim.
Insert the rest of the handle.

The accuracy of installation and functioning is checked both from the side of the latch itself and from the drum device with a key.

Stationary

The stationary product has simple design attached to the door with screws. Therefore, it rarely breaks down, and is removed only when it is necessary to change it to a more functional model.

To unscrew the fittings for the interior door, it is necessary to carry out the following actions:

Inspect the door mechanism for the presence of an axle bar. To do this, hold the handle with one hand, turn it with the other.
If the mechanism is located on the rod, remove one supporting side, the second moves away on its own.
If the rod is not found in the handle, use a flat screwdriver to unscrew the screws holding the handle.
Remove it by gently pulling it towards you.

When unscrewing the mechanism, it is necessary to carefully hold it with your hand so that after removing the connecting screws, part of the product does not fall out of the connector and is not damaged.

For interior doors

In the pressure device, the process of disassembling it causes difficulties. This is due to the fact that the fittings are mounted on the axial rod and pulled together by a 4-sided.

To carry out the repair of the interior door handle, the disassembly of the push mechanism is carried out in 3 stages:

Remove the screws that hold the pad, remove the plugs.
Then it is necessary to loosen the fixation of the rod and separate the 4-sided square.
Remove the lining on the other side, the rest of the mechanism and the axial rod. After removing the parts, you need to pull the handle towards you.

The pressure product is ready for replacement or repair.

How to fix a pen

Often, door handle repairs are carried out in such cases:

the mechanism does not return to its original position;
the handle sticks, it turns hard;
the tongue does not move when turning, pressing the device;
the handle falls out without damaging the base.

Often the cause of these problems is wear, abrasion of the part during constant operation. Therefore, periodically it is necessary to lubricate the mechanism parts and the keyhole, clean it from dust and dirt. When lubricating, the door product is scrolled so that the viscous liquid is evenly distributed over the elements.

If the handle is loose, it is necessary to correct and tighten the fasteners.

Sometimes it is required to repair fittings in metal Chinese door. Products made in China from silumin fail, break, and it is not easy to install a lock in such a door. It's easier to replace the mechanism. The principle of operation is similar to replacing an element in interior doors.

In the interior

In the door handle for interior doors, repairs are most often made when the handle falls off. The base remains attached.

The reason is the use of low-quality fittings, as a result of which the retaining ring could break or fall off.

To carry out repairs, perform the following steps:

Unfasten the base from the door.
Examine the retaining ring. If it has moved, it is necessary to adjust its position and install. If the ring bursts or breaks, it is changed with the further installation of the handle.

The duration of the procedure is 15-20 minutes.

Repair of the door handle of the interior door is carried out if, after opening the doors, the fittings do not return to their normal position.

The cause of the malfunction is a breakage or displacement of the spiral.

To replace the spiral, the following work is carried out:

remove the device;
unfasten the damaged part, replace it;
secure with a retaining ring from above;
install the mechanism.

If the spring bursts, you can make it yourself from a small piece of steel wire. Pre-wind it, heat it on fire until bright red and lower it into cold water.

Removal and repair of the lock

Repairing interior door locks is difficult. The causes of failures are different.

When using cheap low-quality door fittings made of silumin, a 4-sided pin may break. The solution to the problem is the purchase of a steel mechanism from trusted manufacturers and its complete replacement.

A common malfunction of locks is incorrect operation of the tongue. This is possible with a short pin. The square can move in the direction of the latch, press it, reducing the functioning.

Repair work locks are carried out in this way:

A long pin is bought, the length is measured.
With the help of a grinder, it is shortened to the required size.
Then you need to disassemble the lock of the interior door.
The square is changing, door fittings are being installed.

When mounting the handle, the base must cover all the holes left from the previous mechanism.

A lock with a handle can be replaced or repaired even by a novice master who knows how to use improvised tools.

Included with any door without fail handles are provided, otherwise you simply cannot open them. Many developers do not pay enough attention to door handles, believing that their main purpose is to assist residents in opening and closing the door. However, the handles have yet to withstand the heavy loads of the door and fit into the overall design of the room. It seems, at first glance, that it is very easy to install this fitting on interior doors. However, in this case, deviations from the instructions for installing the door handle are not allowed!

Purpose of door handles

Before you directly engage in the installation of door handles, you must first buy accessories. To do this, you should decide on the model and manufacturer of the pen. This is not too easy to do, since the market offers a rich variety of fittings that differ from each other. appearance, size, price and material used.

First of all, door handles are divided into two types: for interior and entrance doors. The fittings for the front door should not be so much aesthetic as reliable and durable, because they have an enormous load, since it is unlikely that it will be possible to open the heavy front door to the apartment without pressing the handle. Often, door handles for entrance doors are equipped with special steel plates and combine the functions of protectors, that is, they serve to protect the cylinder mechanism from drilling, breaking, and other forced breaking methods.

Handles for interior doors are less massive in appearance, they are supposed to be more beautiful and elegant according to their intended purpose. But no one canceled their reliability, because no one will like it when the handle remains constantly in the hand when opening or closing the interior door.

The principle of operation of the handles

When buying door handles, it is recommended to pay special attention to their functionality and adaptability to hand movements. Depending on the principle of operation and the shape of this fitting, there are such types of door handles: push, stationary, push-buttons (knobs) and handles for sliding doors.

Push handles

Push handles are equipped with a latch that is embedded in the door. When the handle is pressed, the lock tongue is set in motion, the latch is hidden, and the door opens. When the door handle is in its original position, the latch is extended and the interior door is locked. Thus, the installation of a push-type door handle is only possible if the door is equipped with a lock with a latch.

Push-type handles, in turn, are divided into two types: models with separate overlays and with a solid overlay. Lever handles, which have a solid pad, are usually used with latch and deadbolt locks, which are actuated with a key. When selecting such a handle, the center distance between the axis of the keyhole and the handle, the width of the lining, the shape of the turnkey keyhole and the section of the profile pin of the door handle are taken into account.

Separate escutcheon handles are also used with locks that have a latch latch and a deadbolt actuated by a key. However, when selecting these handles, the center distance is not taken into account, only the size of the pads is taken into account. If a lock without a deadbolt with only a latch is used in an interior door, then it is customary to install a push handle with one rosette. In this case, the key is no longer needed.

Push button handles

Knobs are a type of push handles, often referred to as ball handles. There is no lever to press, and to act on the latch, you must turn the ball. A keyhole is usually located in the center of such a ball. The handle opens the door with a simple twist. It is customary to install noba door handles on the door to the bathroom or bathroom, they can be closed from the outside with a key, and from the inside - with a button or latch.

Stationary handles

Stationary handles, unlike push models, are in no way connected with the door lock. They cannot be turned or pressed, but can only be pushed away from you or pulled towards you. Install the stationary handle simply on the door leaf: fix such fittings on entrance doors on tightening screws, and on interior doors - on screws. Stationary handles can have different shapes, but the most common of them is U-shaped (bracket).

Since such a handle is completely unrelated to the lock, a lock with a latch latch will not work in this case; a lock with a roller latch and a deadbolt or only with a deadbolt is preferable. Such a roller latch will fix the door, easily releasing it when the door is opened.

Sliding door handles

The sliding door is non-standard solution in interior design. Doors of this design require the installation of a special handle. Handles for sliding doors are built-in, “drowned” inside the door leaf itself. It is necessary that they correspond to the size of the inner door in order to avoid poor-quality work of the structure.

door handle material

The materials from which handles are made can be different, but most often you can find handles made of metal and wood. Wooden handles look very nice, they are especially harmonious for veneered and wooden doors. However, they are most often afraid of high humidity, and are not suitable for use in the bathroom. To abrasion racks only handles made of hardwood.

Metal handles can be made from different alloys, so they differ performance characteristics. The most functional and reliable handles are made of brass. They are resistant to changes in humidity and temperature, light, durable and warm to the touch. Aluminum handles are not as strong as brass, but they can be placed in rooms with high level humidity.

For the manufacture of door handles, ordinary and stainless steel is used. This is a durable material that is intended for the heaviest structures. On models made of alloys or metals, it is customary to apply a nickel-plated or chrome-plated coating, which protects products from abrasion and corrosion. Bohemian or Murano glass, natural stone and plastic are also used for the manufacture of door fittings.

Do-it-yourself door handle installation

Despite the wide variety of door handles, their installation comes down to performing the same steps. Let's take a closer look at how to choose and how to properly install a doorknob on a door.

Choosing a door handle

The handle for the door must necessarily correspond to the general style decision of the interior. For example, if your house is furnished in high-tech style, then it is better to give preference to concise chrome-plated handles, and leave luxurious gilded items with artsy elements for rooms in the rococo or baroque style. For interiors in classical style it is better to choose bronze door handles.

In addition, the handle must fit under the door according to color scheme. The visible parts of any door are hinges and locks, so the handle should match them in color. On massive doors, you should not choose a weak handle, because it will quickly break under loads. Wooden handles should not be installed in damp rooms.

The handle must not adversely affect the functioning of the door locking mechanism. An improperly selected handle delivers a lot of trouble: the door does not open or close well. Therefore, before going to the store, it is worth measuring the thickness of the door leaf to find out if the model you like is right for you.

Make sure that all the mechanisms of the handle work properly, and that the lock tongue is completely hidden inside the case. And finally, when buying, it is recommended to touch the handle to find out how comfortable it will lie in the palm of your hand.

Handle installation height

Before installing the door handle, you need to decide at what height you will install it. If you are replacing fittings, then it will be a little easier here, because you have to put the handle back in its original place. The situation with the new door leaf is somewhat more complicated. Remember that door handles in any case should be located at the level of the person’s belt.

When opening the door with the door handle, the arm must necessarily be bent at a right angle in the elbow joint. Depending on the height of the owners, the installation height of the door handle is 80 - 120 centimeters from the floor surface. Please note that the handle on the door that leads to the children's room should be placed slightly lower than on the door to the living room or parent's bedroom.

Door leaf marking

It is recommended to mark the door leaf with a square. Draw a line on one side of the door with a well-sharpened pencil, attach a square and mark on the door with an awl the height of the door handle at a distance of 60 millimeters. Then attach a square and draw the end of the door, after which you can start marking on the other side.

Continue the line on the other side of the door along the finished line and make a mark with an awl at a distance of 60 millimeters. It is also necessary to make a puncture on the butt line with an awl, dividing the thickness of the door in half. After that, attach the fittings to the installation site so that the tongue protrudes completely beyond the borders of the door leaf. In this position, circle the place where you will need to drill a hole for the handle mechanism.

Drilling holes in the door

To drill a larger hole for installing the handle, it is recommended to use a special drill that has a crown. To do this, take a drill, clamp the crown on the tree and drill through the door leaf on one side. Drill not through, but to a depth that is equal to half the thickness of the door, having previously looked at how to install the door handle on the video. To make it visible, you can make a mark on the crown with a marker.

Then drill a hole along the markings on the other side of the door until it is completely drilled out. With this technique, you can be sure that the crown at the exit will not spoil the back of the door and will not go to the side. Hold the drill at a 90 degree angle to the door. Do not allow the drill to deviate horizontally and vertically.

Once you've drilled the hole for the mechanism, it's time to make a hole for the handle's tongue. You can drill it with a feather drill or using a chisel. The most important thing is to control that the drill drills evenly, because only about 6 millimeters will remain at the edges. If you can remove the door, then it can be passed between the legs for easier drilling.

Door handle fixing

When all the necessary holes are prepared, you can begin to install the door handle with your own hands. First you need to take the handle for the door, attach it to the installation site and mark with an awl the points for installing the bolts on which the handle itself will be attached on both sides. To perform this operation, install the mechanism of this design in the drilled hole and screw both halves with the bolts included in the kit.

Bolts must be tightened evenly. Remember that the tightening should be such that the door handle works well and the latch easily returns to its original time. Handles in which the bolts are located under the cap, and therefore are not visible, should be disassembled by pressing the stopper on the handle with the key that comes with the door handle.

Installation of a metal frame

After you have installed a round door handle or another type of handle, you need to proceed with the installation of a metal plate. To do this, again, you need to make a markup. There are two marking methods. The first of them lies in the fact that the end of the tongue should be smeared, for example, with chalk, oil, paint or even toothpaste. Then hide the tongue in the door, close it tightly and make an open-close movement several times so that the tongue makes a mark on the door frame.

The second way is as follows: close the door, slide the ruler into the slot above the tongue and make a mark at the place where it touches the tongue, also mark the bottom of the tongue. To attach a metal frame to the box, you should mark a hole for the tongue and the plate itself. First of all, you need to make a selection under the tongue with a chisel or pen drill.

Having made a hole for the tongue, it is necessary to check whether the tongue comes out of the latch completely and whether the door closes. If everything is fine, then you can start creating a sample for the frame, which is also done using a chisel. The metal frame inserted into the sample should be at the same level with the surface of the box.

The metal frame is screwed to the box with screws. To do this, drill holes using a thin drill, then the screws will lie without distortion. After performing such manipulations, you can close the door to evaluate the result of your work. If the handles open and close easily, the latch moves freely, the door can be closed by light pressing without effort, then such a door handle installation can be called successful.

Door handle replacement procedure

It often happens that it becomes necessary to reinstall the handle on old door. The procedure for replacing fittings is somewhat different from the scheme for installing a door handle on new door, since the hole for the mechanism of the product already exists, and its dimensions should be taken into account. We recommend that you take advantage of some of our tips:

When buying a new door handle, you should consider that it should be no smaller than the old one. Otherwise, the old hole for the mechanism will not be closed, which will spoil the whole look of the door. If it still happened, you need to fill the holes on both sides with wood putty and sand this place with sandpaper.
If you purchased a handle larger than the previous one, then you need to expand the hole for the mechanism. This is done using tools that are used to create a hole for the handle mechanism.
If the new door handle is shorter than the old one, and the old spindle is not suitable for it, then it must be replaced with a new one from the door handle kit. And if the spindle is suitable, then you should use it to get rid of unnecessary hassle that may affect the quality of mounting the handle.
If the lock bar is painted but you want to restore its original metallic shine, then in this situation it is recommended to remove this part before installing the door handle and remove the paint with special means, then return the part to its place.
If you decide to paint the door, then you should first remove the door handles and paint the area that is located under them, and only after that you can proceed to further painting the door leaf - this allows you to carefully apply the coloring composition to the door, and also save the fittings from getting on it paints.

Now you know how to install a doorknob. The whole procedure will take you a matter of minutes if you correctly mark the door leaf and door frame, and evenly drill holes for the mechanism and the tongue of the door handle. By analogy, you can also replace the old handle if it breaks, but you need to carefully consider the selection of new fittings.