How to install an accordion door. Accordion door: from advantages to installation features Accordion doors how to install yourself from plastic

An integral part of any room is the doorway, and each owner draws it up differently. Someone installs a standard, decorative, or even metal door, someone prefers, although the latter option is fraught with certain difficulties. AT recent times models called "accordions" appeared on the market, they are also swing doors, the installation of which we will consider

Door features

Regardless of the design, all accordion doors have mandatory identical components: guides, stoppers, rollers. Their installation is a simple matter, therefore it is also accessible to a non-professional.

Before purchasing a product, you need to measure the opening. It should be noted that if its width is within 1 m, then only the upper guide will be needed. When buying, you need to look at the package. For some manufacturers, it does not include extensions and platbands, so they are purchased separately.

Standard kit (option):

• guides (1 or 2);
• connecting loops and carriage rollers (2 or 4 pieces);
• panels;
• accessories and adjusting key.

It is necessary to pay attention to the number of panels and their width. Together they should completely close the doorway. In addition, the correspondence of the names and the number of fasteners. Otherwise, the installation will be delayed for a long time.

Installation steps "accordion"

Assembling the door plates into one piece, for which they are laid out on the floor, next to each other. The method of fastening together may vary slightly (depending on the manufacturer), but the principle is simple. The result should be a solid canvas.

Side planks. They are installed vertically (checked by level) and rigidly fixed in the opening.
Installation of guides. If their length is longer, then aluminum (plastic) can be easily cut with a hacksaw.

It is necessary to pay attention to the holes in the guides for fastening to the opening. When they are shortened, the part where the holes are located is cut off. It is necessary to prepare the bar so that they are at its ends from the edge by about 2 - 3 cm. Then the guide will be fixed securely. Along the entire length between the holes, 25 cm is enough, for the top - no more than 15, since the entire load falls on it.

Mounting guides. After marking, holes are drilled and sleeves are installed for fasteners.

Even before starting work, it is necessary to check the "geometry" of the opening. The main thing here is strict horizontality, especially if there are 2 guides (top and bottom). Therefore, you need to use building level. Practice shows that when removing and dismantling the box, the opening opening is not a perfect rectangle. And the parallelism of the top and bottom, as well as the sides when installing the "accordion" is required.

You need to be aware of the circumstances. Or leave the box and level the wood, sand it, or remove everything, but ensure horizontality by laying an additional layer of mortar. But at the same time, the fasteners must be longer so that they reach the material of the opening.

There is one caveat here - at first, the guide is fastened to only one self-tapping screw, and it is screwed loosely.

After that, the door is hung on the rail (the sliders are inserted into the groove), and the “assembly” is attached to the upper part of the opening according to the previously made markings. Next - fastening the rear half-panel with the installed vertical bar.

A magnetic latch is placed on the “front” half-panel (locking). Lastly, a door handle is installed.

• It is advisable to lightly lubricate the “runners” with technical petroleum jelly - this way they will glide better;
• it is desirable that the "accordion" itself be slightly wider than the opening.

Please note that this is only a general technology of work, since different models have their own design differences (for example, in the way the lamellas are connected, in their material). In each specific case, the manufacturer's instructions must be followed.

Every year folding doors become more and more popular. They are completed country houses and apartments, offices and utility rooms. This is because folding structures have the following advantages:

1. Possibility to save space. They can be folded at any time, so they practically do not occupy usable space.
2. Simple mechanism. Accordion doors include panels, fasteners and guide profiles. You can collect them yourself. Needs for use building materials and no finishing work.
3. Versatility. There are no restrictions on the number of panels. The only thing that should be guided by is ease of use. After all, too bulky structures are difficult to use.

Among the shortcomings that are inherent in the accordion door, there are:

1. Low level of sound insulation.
2. Short term use. This is due to the fact that the composition includes moving parts, which wear out due to frequent use.
3. The need for frequent repairs. Folding mechanisms periodically jam. Most often this happens if too large sizes are selected. interior door harmonic.

To operate folding doors longer, it is necessary to carefully select the model.

The folding door system includes a set of slats, presented in the form of a leaf or with glass inserts, guide profiles and hinges. To simplify the process of moving, rollers are introduced into the composition, which are located on the outer doors. They move along the profiles at the moment of opening and folding the structure. The rollers are supplemented with bearings made of high-quality raw materials. Therefore, the opening and closing process is completely silent.

Varieties of folding doors

Folding interior doors are classified according to two parameters:

• materials used for the manufacture;
• decor.

For the manufacture of folding structures, wood, reinforced glass and plastic are used. Each option has its own characteristics and strengths.

Wood accordion door

Demand wooden doors the harmonica is high, because the designs are distinguished by reliability and duration of use. All elements from are treated with impregnations and chemicals. The hinges included in the composition are made of alloys with a certain margin of safety. Do not provoke deformation of elements from wood and temperature fluctuations.

Before installing folding wood structures in the kitchen, you need to check the degree of their protection. If the main elements are processed with a low-quality composition, then under the influence of moisture they will begin to deform.

Plastic door accordion

The constant load on the plastic panels helps to reduce the lifespan. With moderate use, the service life plastic doors the accordion reaches 10-12 months. The main advantage of this design is low cost. Plastic folding doors can be used as a partition.

Glass accordion door

Folding glass is rarely used to make the base for an accordion door, since its integrity is easy to break. The cost of glass models is many times higher than the cost of analogues made of wood or plastic. To reduce the cost, manufacturers combine glass with other materials, which also contributes to the strengthening of the structure. Glass doors are decorated using special films, varnishes or sandblasting equipment.

Model selection features

Since the range of folding doors is huge, it is sometimes difficult to navigate. You can simplify the process if you follow the following rules when choosing a model:

Stages of installation of an accordion door

Before assembling the accordion door, you need to check the complete set. The following items must be available:

• guide profile (their number depends on the selected door model).
• fixture.
• lamellas.
• rollers.
• adjusting key.

Manufacturers do not include platbands in the kit, so they should be purchased immediately.

Before you buy an accordion door, you need to take measurements. This will make it possible to purchase a model with the required characteristics.

Installation of a folding interior door consists of several stages. It is important to follow their order.

1. Preparation and fastening of the guide. If necessary, prepare additional holes for fasteners. The distance between the holes should be 25-30 cm.
2. Panel installation. On the one hand, the guide profile is supplemented with a latch, on which the end of the panel and the roller are inserted. Then the guide is fixed.
3. Door leaf assembly. To connect the structure together, holes are formed on the panels and fastening loops are installed in them. The lamellas are arranged in the order in which they will be installed. For simplicity, the first and last panels are marked. The distance between the panels should be 3-4 mm. Before installing the fasteners, the mechanism for the accordion door is checked again to prevent displacement.
4. Canvas installation. The panels assembled in the form of an accordion are folded and placed in the grooves of the guide. Be sure to check and correct their position. This process is carried out using the adjusting key.

After installation, the operation of the roller mechanism for accordion doors is checked. If necessary, dismantle, correct errors and re-fix the door leaf.

During the installation of the door leaf, it is necessary to be guided not only general recommendations. Each model is accompanied by instructions in which manufacturers describe in detail the process of assembly, fastening and installation.

Simple and quick installation of an accordion door - video

Non-standard solution for installing an accordion door - video

If there are difficulties when planning the interior of the room, a convenient and practical folding door will always come to the rescue. It significantly saves space and allows you to use it rationally. Self assembly structure can cause it to malfunction or break, in which case it is required to return the system to its functionality.

Revecon specialists will perform a competent installation and tell you how to remove the accordion door if the well-coordinated mechanism has failed. Before installing the interior structure, designers develop a project taking into account the characteristics of the room, the characteristics of the folding system.

Catalog of our products - we work on the territory of Moscow and the Moscow region

Folding interior door device

When the structure is opened, the canvas, made of several parts, gradually folds up, moving along the rail to the opening. When folded, the door does not occupy the area of ​​​​the room, only slightly narrows the passage. This system most often installed in small apartments, in order to save space.

Accordion doors are convenient and functional systems that Revecon designers recommend installing in small rooms to save space, zoning open-plan apartments.

Characteristics of the interior system

Before you put a folding structure or dismantle it for repair, you should study all its features. It is completely different from the hinged conventional system, but is somewhat reminiscent of compartment sliding products. Distinctive feature accordions - its canvas is divided into several separate parts and is assembled when closing.

The folding door consists of the following elements:

• Thrust and guide rails;
• canvas plates;
• Corner and guide sliders;
• Clips, lock strap;
• movement mechanism;
• Connecting flexible elements;
• Handle and fittings (overlays on the tape).

In some do-it-yourself products, the panels are hinged. When installing the structure, Revecon engineers take into account not only the convenience of its operation, but also the dismantling of the accordion door video, which clearly demonstrates the advantages and disadvantages of the folding mechanism:

A small space creates a lot of inconvenience during space planning, but not for Revecon designers. For the rational use of a small area, we propose to install an accordion door, which has a lot of advantages:

• Saving free space;
• Possibility of using various finishing materials in the interior of the room;
• Noiselessness, smoothness of the system;
• Safety, reliability;
• Possibility of equipping openings of various sizes.

Regardless of the design features, all harmonicas have similar components: rollers, stoppers, guides. Their installation and dismantling, with experience, can be done independently.

Varieties of folding doors

This model of interior systems has a specific and unique design. All accordion doors differ from each other only in some design characteristics and materials from which they are made.

By design, products can be classified into two categories:

• Doors with glass additions;
• Deaf solid products.

For the manufacture of doors, wood or plastic is most often used. The first version of the model is durable in operation, PVC structures are less practical, they can fail at any time, so they are not popular.

Application and main purpose

The main advantage of an accordion door is economy. The structure is folded really compactly, an opening with a width of only 60 cm is suitable for its arrangement. The main area of ​​\u200b\u200bapplication is small corridors. When choosing a product for a bathroom, kitchen, it is recommended to give preference to materials that are not exposed to steam, moisture - glass, PVC. For other rooms, there are no restrictions in fantasy.

Another common application is interior partitions. With their help, you can select individual zones, if necessary, the sash is simply moved back to the wall. Silent, lightweight designs the best option to complete such a task.

Dismantling of folding interior systems

A feature of disassembling sliding models is a huge number of accessories with which the sash is fixed in the opening. Instructions and videos on how to remove an accordion door for each type of design may have their own nuances.

Consider the dismantling steps when disassembling a conventional coupe system:

• Remove secondary accessories, if any. Carefully remove the synchronizer, closer, automatic drive from the canvas.
• Remove the clips located at the edges of the rail by carefully unscrewing the bolts.
• If there are side restraints, they must also be removed.
• After the retaining parts are removed, the canvas is carefully removed from the guide.
• Dismantle fasteners, rail.

The dismantling of the sliding structure is completed by the dismantling of the platbands. This can be done carefully by inviting Revecon specialists or roughly - on your own without any tools. Before starting work, engineers coordinate all the nuances with the owner of the apartment.

In city apartments there is not so much space. This is especially true for houses built under the USSR. These apartments have hinged interior doors. The disadvantage is that they require a certain amount of space to open. It's good when there is a lot of space, but what to do when every square meter counts? Installing an accordion door will help solve the problem of lack of space. it modern solution, which will significantly save space in the apartment.

It is worth noting that this is not just an interior door. Many models look so impressive that they become the main components of the design. These designs are made from the most different materials. Manufacturers complete these solutions with a set of fasteners and everything you need to install an accordion door.

Characteristic

This design is a system consisting of several vertically installed lamellas. The latter are connected into a single canvas with the help of loops. Visually, such a door resembles corrugated blinds.

When the door is open, its constituent elements (lamellas) fold like bellows on an accordion. To ensure that the movement of the slats and the door leaf is as smooth as possible, and that all elements are parallel, special synchronizer parts are used in the design. In order for the mechanism to be fixed in a certain position, the system is equipped with special locking flags.

As for the design, the installation of an accordion door is not suitable for every interior. But if you choose the right model, then the room can acquire unique features.

What is needed for installation? materials

Most manufacturers complete their products with a set of necessary fasteners and accessories. Better and more expensive solutions have several spare guides, with the help of which it becomes possible to install an accordion door in wide openings.

Concerning necessary materials, then you need to purchase what you need in the process of preparing the opening. These are any extensions, as well as platbands that fit. It is important that the material has a thickness of at least 15 millimeters. It will easily support the weight door structure and all operating loads.

Tools

For installation work you need an impact drill or puncher, measuring tools, a plumb line along with a level, a hacksaw, a corner, a miter box, mounting foam. The latter will require several cylinders. It is desirable that it be of good quality.

Preparing the doorway

Installation of interior accordion doors is quite possible in an existing opening directly inside the door frame. But in this way its width will be reduced. Much better to dismantle old door completely and remove the mortar under the box to the ground. Next, measurements are taken and checked against the nominal dimensions of the doors and the number of elements in them. This list must be in the installation instructions. When checking sizes, it is important to remember the width of the extensions.

So you can find out whether it is necessary to expand the opening or, conversely, reduce its size with the help of foam and extensions. The latter are cut in such a way that the result is a box without a threshold. The upper part is fixed with the end parts to the upper edge on the vertical extensions. Then the structure is fastened with self-tapping screws.

After the box is made, the element is inserted into the opening and fixed with the help of wooden blocks, as well as wedges and various substrates. To install the box more securely, select several bars, the width of which is equal to the opening. These spacers are installed at the top, in the central part of the box, and at the bottom. This is done to prevent deformation of the extensions during installation. Anchor bolts of great length are used to fasten the dobor to the base of the wall. Install three on each side and two at the top.

When the anchors are installed, they begin to foam the gap between the wall and the box. After the foam has dried, you can proceed to the installation of the accordion door. It is quite possible to do it with your own hands.

Installation of guide rails

In order to calculate everything correctly, you should start work with the installation of guide structural elements and other fasteners. The set of the door system necessarily has a profile, which is the guide. As indicated in the instructions, you should first measure the desired length of the profile - the excess part is cut off. It is best to use a miter box for this. Then the cut will be as even as possible.

They also cut a guide for mounting the blind element of the door and the counterpart from the side of the handle. Further, all measurements are checked again, but they do this by attaching a profile - it is still too early to fix it. Holes for self-tapping screws are pre-drilled in the guide. Holes are made in the upper rail every 5-7 millimeters. On the side elements - every 15-20 centimeters.

If the guide is mounted using special fasteners-clips, then they immediately proceed to install them around the perimeter of the opening. Often, the same elements are used for the top and profile. On the side where the groove and lock will be, smaller clips are used.

The upper rail is mounted in such a way that the fasteners are located no further than 5-7 centimeters from each other. On the side parts, 4 or 5 clips are enough evenly in height.

Fabric assembly, roller assembly

Each strip of which the canvas will consist is cut so that they are equal to each other and resemble the height of the opening. The accordion door installation instruction recommends taking into account the margin for the roller system, which is inserted into the upper guide. The lower part should have a ventilation gap of no more than 10 millimeters.

In simple cases, plastic strips are connected using grooves or gaskets. Two parts are shifted and joined at the edges, and then one element is pulled along the other. In MDF doors, the strips of the canvas are connected to each other by means of an axis, which is threaded in turn through special eyes on each element of the canvas.

After the canvas is assembled, you need to install accessories on the product, as well as rollers. Everything must be done strictly according to the manufacturer's recommendations.

Final assembly process, fasteners

It remains only to put an accordion folding interior door. Do-it-yourself installation involves threading rollers into a rail profile. When everything is inserted into place, the structure is folded and placed in the central part of the profile. This makes it easier to fasten in the doorway.

If clips are used for fastening, then the rail simply snaps onto them. If necessary, a hammer is used to fully snap into place.

If there are no clips in the kit, then self-tapping screws should be used. They first attach the profile along the edges, and then along its entire length.

Next, install and fix the side profiles of the structure. Then the blind part of the canvas is fixed to the profile. At this point, it is recommended to check how easily the door moves and how tightly it fits to the mating element.

If the canvas has a smooth ride and fits well, then you can proceed to the installation of the handle. When the door is closed, step by step instructions installation of accordion doors is recommended to mark the point where the counter element of the lock is located. A latch with a magnet is then screwed into it.

Testamentary stage

When everything is securely fixed and checks have shown that everything is working, they begin to install the trim around the perimeter of the door frame. They must be installed on both sides. A hacksaw cuts the excess, thereby limiting the length. Attach these products to liquid or furniture nails.

This completes the installation. Now you can experience all the benefits that the installation of accordion doors provides. The price of the structure is low (from 2200 rubles), and the effect of the installation is tangible. You can immediately see how such a door saves precious free space.

So, we figured out how to independently install an accordion-type door.

The desire to make your home cozy, comfortable, functional dictates the rules for choosing interior items. Interior doors serve as a means of dividing zones, protection, sound insulation.

Not always standard hinged construction easily fits into the dimensions of the house. Need to save space. Dealing with this task sliding doors. One of the varieties is the accordion door.

Until recently, the harmonica was not considered exquisite decor. But technologies are developing, which made it possible to make the accordion door a modern element in the interior. Is it possible to install an accordion door with your own hands? Will there be any difficulties or is it easy to do everything yourself. Let's talk about it by looking at design features accordion cloths.

According to the layout principle, an accordion door is similar to its accordion object of the same name. The canvases, one after another, smoothly fold or straighten like accordion furs. They help save room space, because when opened, they reduce their size by two to three times, remaining in the opening. There is, of course, an inconvenience if the doorway is narrow, and even the canvases reduce its width. But in general, this is offset by the ability to reduce the presence of the facade in a small room.

Today, the accordion door has become relevant not only as an economical option, but also as an individual designer decor. The accordion layout system is used for showers, protecting the premises from water; for cabinets that are installed in narrow rooms; for dressing rooms, hiding them behind exquisite decor. Accordion doors can divide the space like interior partitions, folding along the entire length and completely opening the room, if necessary.

Factories produce different models accordion doors on the internal filling of the canvases. It can be MDF panels, plastic, fabric, mirror, glass, less often wood. Solid wood is a heavy material, even perfectly dried. Accessories may simply not withstand heavy canvases. If the array is used in the production of an accordion, then with the strengthening of the system of running the canvas along the rails or using veneer on a thin base.

The design feature of the accordion doors is not diverse. These are rectangular canvases of different sizes. Width starts from 100 mm and more. The smallest opening that will allow you to install an accordion door should not be already 600 mm. The rest is a matter of fantasy and the width of the opening.

It is necessary to choose high-quality designs that have a reliable foundation. The frame of the panels must be rigid so that it does not fall apart with an accidental effort.

Fittings are always sold as a set, it can vary only in the number of paintings from the width of the opening. The accordion package always provides for an upper guide, a system of rollers. With massive structures, the lower rail is also used so that the product does not sag under heavy load. The lower part is usually recessed into the floor, does not interfere with the movement of users.

Not required for installation door frame, as when installing swing interior doors. The jamb can be ennobled in advance with decorative coatings or covered with extensions purchased independently. The rest of the installation should not be a problem. Therefore, you can install an accordion door with your own hands, without overpaying the craftsmen. We will help you master the installation of the structure, if you decide to do everything yourself.

The sequence of installation of the accordion door

As with any installation, at the first stage they prepare the opening and buy an accordion door right size. If, with facades installed in a box, the size may have errors (mounting foam will close everything), when installing a sliding accordion, we determine the dimensions after preparing the opening.

Minimum gaps are needed only at the top and bottom of the canvas for ease of movement of the accordion along the rails.

1. After dismantling the old kit, having prepared the opening, we take measurements in height and width. The store sells an accordion door with a set of the number of canvases for which width the future design is designed. But in place you will have to adjust the height of the panels, the length of the guide. Sometimes an accordion covers a space more than a meter wide. Then a double-leaf accordion can be chosen, i.e. the doors will open to the right / left at the same time so that the structure is not heavy.
2. Decide before you start installing the accordion door with your own hands, in which direction you need to open the facade.
3. Mounting options for top fittings.
4. You can install the guide on self-tapping screws by pre-drilling holes in the right places, installing dowels under the fasteners.
5. We measure the width of the opening, cut off the desired length if the profile is larger than necessary.
6. We install the bar to the upper surface of the opening. If there are no holes, make them yourself using a drill and a drill of the desired diameter.
7. We install vertical profiles in the same way, sawing off the height if necessary.
8. The second method of installing horizontal and vertical profiles with your own hands is distinguished by the presence of clip-locks that allow you to snap the bar with a mallet.
9. Drill holes in the wall, install the lower part of the clip. Fasten the other half of the lock to the profile.
10. Attach the clips by applying slight pressure to the bar or by tapping with a mallet.
11. Similarly, we set the vertical profile on both sides.

We collect the accordion door

Perhaps, assembling the panels into a single canvas is the most painstaking part of installing an accordion door with your own hands. The instructions supplied with the product must be followed exactly.

A step-by-step illustration will allow you to correctly assemble the panels with your own hands.

1. We take measurements of the height of the opening.
2. We measure the desired length on the canvas, making allowances for the depth of the profile, leaving a gap from the floor.
3. Cut off the excess, repeating the procedure with all panels.
4. We proceed to the connection of the panels to each other. For this, special hinges are provided that allow the door to fold and open again. Depending on the weight of the panels and the permissible load, two or three connecting loops can be installed on the surfaces.
5. Lay the canvases in the desired sequence on the floor. They should be tightly adjacent to each other so that no gaps appear in the hinged position.
6. Check the compatibility of the panels on the top and bottom lines.
7. We drill holes for fastening with a loop. Sometimes the hinge replaces the end and vertical profile, allowing you to combine the elements of the accordion door with your own hands in a matter of minutes. It is only necessary to follow the recommendations in the printed instructions.
8. The accordion door set includes a metal mount, into which all the canvases are inserted one after another, forming a single plane.
9. At the end of the profile under the facade, a roller or several rollers are placed, allowing the entire canvas to move without problems.
10. When assembling an accordion into a single structure, pay attention to the location of the extreme panels. A lock and a handle will be fixed in the lock part. The end panel will go into a vertical profile installed on the wall of the opening.
11. Having assembled a single canvas, we proceed to the stage of hanging the accordion on the guide profile at the top of the opening.
12. Sometimes it is difficult to get the rollers and stoppers into the guide due to the close location of the jamb. Then the option of installing the guide profile only on the middle self-tapping screw is provided, so that it becomes possible to move it to the side to insert fasteners into the groove.
13. We return the profile to its place.
14. We check the operation of the accordion door. The movement should be easy, silent.

Installing the handle and lock

At the final stage, it is necessary to fix the handle, the lock that comes with the kit or purchased independently. Usually the lock is magnetic, but some consumers want the door to lock securely.

1. On the extreme canvas of the accordion from the side of the lock, the necessary technological holes are made for the lock and the handle. We pre-make markings for planting door fittings. The handle should be slightly offset from the edge of the accordion door, because the panel goes into the vertical profile, tightly adjoining the wall. Close mounted handle may interfere with the tight fit of the accordion door.
2. Once again we check the operation of the smooth running of the canvas, the absence of cracks, distortions.
3. When choosing an interior door, an accordion with a system of top and lower profiles in the configuration, it is necessary to fix the lower rail before installing the canvas.
4. It is usually recessed into the floor in the area of ​​the nut. The length corresponds to the width of the opening.
5. When installing, the lower set of wheels is first started, and then connected to the upper rail.
6. Floors must be perfectly level. If there are irregularities, slopes, it is necessary to level the surface in order to avoid failure of the accordion door.
7. After completing the installation of the accordion door with your own hands, take care of the decorative trim around the interior portal on both sides.

If this is not necessary, the do-it-yourself installation process can be considered complete.

If your choice fell in favor of an accordion door, you need to buy it correctly so that do-it-yourself installation is a pleasure, not a problem.

• Buy an accordion door in accordance with the interior, taking into account the technical features of the rooms.
• You should not take an accordion door if the opening is only 500 mm. In the open position, difficulties will arise when moving from one space to another. You will always come across a stacked door.
• Correctly calculate the number of paintings required for installation in the interior opening.
• Do not try to save money when buying an accordion door, because a cheap door will not last long. In the production, cheap plastic and weak fittings are used, which cannot withstand heavy daily loads.
• Buy a few extra panels in case of unexpected damage to the canvas elements. It will not be difficult to replace the damaged one with your own hands if the panel is available. Production is constantly updated, old models are discontinued. Additional element will avoid the lack of the required part from the seller.

Acquainted with detailed guide, installing an accordion door with your own hands should not cause difficulties. To consolidate the information, we recommend watching the video story with detailed recommendations.