Hot stand: do it yourself from different materials. Do-it-yourself hot stand: interesting ideas Beauty from old disks

If you are a fan of needlework and creativity, then you will be interested to know how a do-it-yourself hot stand is made. It is easy to make from materials available in the house. Even a beginner can master the execution technology. So, get acquainted with the options, choose your favorite.

Do-it-yourself hot stand: interesting ideas

If you decide to make such a souvenir, first of all, decide which method suits you best. It will depend on your personal preferences and skills. Stands can be:

• from wood;
• sewn from fabric using the patchwork technique;
• crocheted;
• made of felt;
• made on the basis of computer disks, buttons;
• made using decoupage technique on ceramic tiles or wooden blanks.

Any of the ideas is easily finalized and has many options and interpretations. Choose, add, create.

Use saw cuts of trunks and branches

A very beautiful do-it-yourself hot stand made of wood, made of rounds of the same or different diameter. It is not difficult to prepare them, an ordinary saw and a suitable tree are enough. The saw cuts of apple and cherry trees look good, as they have an original structure. But you can choose any option you like.

The technology of work is as follows:

1. Prepare saw cuts of branches with a diameter of 5-6 cm. If the bark fits snugly against the wood, it can not be removed. Be sure to sand the front side of the rounds until smooth.
2. Make a composition of cuts. The fewer parts, the stronger the product will be. In any case, the parts must be in contact with each other in several places.
3. Connect the joints with glue.
4. For greater strength, the stand can be made of two layers. Accordingly, the saw cut planes are also connected with glue.
5. Leave the workpiece for several hours under load until the product is completely dry.

All is ready! If desired, varnish the surface, although the natural texture is no less beautiful.

Another way is to use one large saw cut, which can be decorated with burning, carving, contour drawing, watercolor ornament, followed by varnishing. If you do not know how to draw, use decoupage (the technology will be described below). As you can see, one material can be used in different ways.

We sew a souvenir

Do-it-yourself hot stand made of fabric is also sewn different ways. There are a lot of ideas. First, decide on the size and shape of the product. It can be a souvenir of the appropriate diameter, as well as a full-fledged rug or napkin. Both those and other options are performed in the form:

• vegetables;
• fruits;
• berries;
• colors;
• animals;
• fairy tale characters;
• abstract patterns in the technique of patchwork.

If you have ever made potholders, then the technology is similar here. The product is made of two layers of thin fabric with a dense material between them.

Felt is of particular interest. It is easy to work with, as it does not require overlaying the edges, because this material does not crumble. In addition, it is quite dense, and when using several layers of felt, folded one on top of the other for decorative purposes, no additional layer is required. Felt is used to make coasters in the form of slices of oranges and lemons, animal faces, hearts and any other plots. This material is represented by a rich colors bright colors, so the field for imagination is large.

Beauty from old CDs

When making a stand, you need to consider that it must be dense, durable and resistant to temperature. If you are going to use a thin fabric on the front sides, you definitely need a dense base.

A do-it-yourself hot stand can be made very simply from computer disks that will play the role of a blank. The technology of work is as follows:

1. Take two disks and cut out circles from the fabric that are a couple of centimeters larger in diameter.
2. Lay the disc on the fabric blank with the wrong side to the disc (you can also lay a layer of padding polyester).
3. On the perimeter of the circle at a small distance from the edge (1 cm), sew the stitches, and then pull the threads. The disk will turn out "sewn" inside. Do the same with the second blank.
4. Take a strap of a length that is equal to the perimeter of the disc. Sheathe the part with braid, or ribbon.
5. Connect all three elements by sewing two "covers" on the strap.

The product is ready. Fast, simple and beautiful.

Knitted fantasy

A spectacular and original do-it-yourself hot stand can be made using this technique. As a rule, all products are knitted in the round according to the napkin principle.

To make such a souvenir, it is enough to find the appropriate pattern, yarn and hook. If you are good at this technique, you can knit any product even without a diagram. Some people like to tie existing blanks, for example, the same computer disk, covers, corks, beads. Flowers and fantasy geometric shapes are assembled from small details.

Decoupage

This technique is suitable for those who are remotely familiar with needlework or have little experience, but want to immediately get a masterpiece.

The meaning of the work is that on a dense base of saw cut wood or, for example, ceramic tiles(previously cleaned and degreased), a napkin (special or single-layer table) with a decorative pattern is glued. After drying, the surface is covered with glue in several layers or varnish. The reverse side of ceramic tiles is covered with a layer of glued felt or fleece.

So, you saw how a hot stand is made with your own hands. Choose what is closer and more interesting to you. Create table decorations or simply original gifts from improvised materials.

Beautiful wooden coasters for hot dishes can be an excellent gift for any holiday. These handmade items will decorate any table and are sure to attract everyone's attention. Making original coasters is not at all difficult, you just need to make a little effort.

Before starting work, you need to prepare:
- six wooden blanks (they can be cut out of plywood yourself or purchased at a specialized store);
- watercolor;
- pencil;
- acrylic lacquer;
- brush with synthetic bristles No. 3 (for coloring);
- a round brush with synthetic bristles (for applying varnish);
- eraser;
- a device for burning;
- container with water.

Having prepared everything you need, you can start creating coasters:

1. On the first blank, draw a dahlia and a border around the edges with a pencil;

2. On the second blank, draw a border and draw a rosehip flower;

3. On the third stand, depict strawberries, daisies and a border;

4. On the fourth blank, draw a raspberry and a border;

5. On the fifth stand, depict a branch of mountain ash, lingonberries and a border;

6. On the sixth blank, draw a wild rose and a border;

7. Turn on the burner and wait until its tip heats up. Then carefully burn out the contours of the dahlia and the border on the first blank;

8. Burn out all the rest of the coasters, carefully circling the pencil outlines with the tip of the burning tool. Then turn off the device and erase all pencil lines with an eraser;

9. Prepare your watercolors for work by lightly wetting them with water. Then color the stand, which depicts a wild rose. To make the color more saturated, apply several layers of paint to the flower petals. Paint over the border with light brown paint;

10. Color the second stand, which shows strawberries and chamomile. On the leaves, mix green and yellow paint to achieve smooth color transitions;

11. Paint the dahlia blank. Paint the tips of the flower petals with white paint, and their main part with pink;

12. Then paint the workpiece on which the twig of mountain ash and lingonberries are burned;

13. Color the stand on which the raspberries are burned;

Such weather outside the window, it is impossible to stay at home! Pick up a thermos with your favorite herbal tea, a camera and children - and go to the park, there are so many amazing and wonderful things that the time spent on a walk will be equal to five lessons at school, three books read and a long conversation with a mentor. Look around, breathe in, admire - this day is unique, and you will definitely get something from it that you will not find in any other day. Birds sing about tenderness, irises proudly raise their heads above the flower beds, freshly cut grass on the lawns drives you crazy with the smell of freshness - a fairy tale! There is a special mood in the parks now: there is no suffocating summer heat yet, but it is already full of greenery and colors, and it is impossible not to rejoice. Take a closer look, you will surely find something that will resonate in your soul only with notes that you understand - perhaps these are touching pansies, trustingly basking in the sun, maybe these are neatly whitewashed park borders, pleasing with even lines, or, who knows, we are talking about saw cuts of dried trees folded in neat piles, which are carefully cleaned by public utilities in the spring? Here it is, the happiness of any creative person! Grab wealth, bring it home - today we will do it!

Hot stand made of wood - 5 ideas that you can implement with your own hands:

1. A simple hot stand made of wood

Sometimes beauty is not a consequence of the use of drawing skills, decoupage, knitting and other techniques. It happens that it is enough just to process the source material, emphasizing its natural properties, in order to get the perfect thing. Try to properly clean and sand the wooden saw cut, take a closer look - maybe this is already enough for your hot stand to please with lines and color?

2. Hot stand made of wood with "lace"

And if you combine what, it would seem, at first glance, is absolutely opposite in essence? Delicate, weightless, light lace and brutal, real, solid wood? Together we can do something very interesting!

3. Hot stand made of wood in the shape of a watermelon

Oh, how I long for summer and berries! Maybe you should sublimate your dream into creativity? A hot stand in the form of a delicious juicy watermelon is just what you need to cheer yourself up and gain strength and wait for the fruit and berry season. The technique of work is simple - even if you do not have special skills in working with paints, you can handle it, it's not difficult. The main thing is to sand the saw cut of the tree well.

4. Hot plate made of wood with a pattern through a stencil

However, if you have a great desire to decorate wooden saw cuts with a pattern, but do not have visual talent, try using stencils - ready-made or do-it-yourself. This simple solution will help you make stylish coasters that are original and unique. The ones that you personally find the most interesting.

Such hot pads can be seen in in large numbers in the Crimean souvenir stalls. They are made from juniper and they diverge very quickly. In conditions middle lane juniper, of course, cannot be found, but it is very easy to make such a stand with your own hands from tree branches with beautiful pattern on the sleep. These are acacia, apple, plum, apricot, oak and ash.

In an hour, you can make several of these coasters. To begin with, we need to pick up branches 3-6 cm thick. You can combine saw cuts from branches of different thicknesses, it will be beautiful.

It is most convenient to cut a branch into saw cuts 4-5 mm thick with a miter saw:

But you can cut saw cuts with a hacksaw for wood. It is advisable to sand each cut from the front side with sandpaper.

The bark can be peeled off with a knife, but this is not necessary, especially if the bark is tightly adjacent.

Now we combine the stand from saw cuts of different diameters (in my case). Front facing inward:

However, it should be borne in mind that the fewer links, the easier it will be to glue the stand. It is desirable that the tree rounds adjoin each other at several points. We glue together the links of the stand, laying saw cuts on top of several circles. To do this, we coat at the junction with PVA glue:

After making sure that all the links are linked together, we send the stand to dry under pressure. I took a linen bag of sand, put it on a stand and put another bucket of water on top. The stand is glued together in 4-5 hours.

There is another option for making a wooden hot stand. We cut out a circle from the matting and glue the cut branches on it on both sides. It turns out very stylish and beautiful. It's also easier to do this:

Please rate this post: