How to age a wooden door with your own hands. How to paint an antique door: preparation, technology

Door panels made of MDF or Sibu plastic are used to improve thermal insulation characteristics entrance doors, as well as their aesthetics. Installing the panels yourself is easy, even with the help of a non-professional tool.

Finishing the sashes with MDF panels: how to work
Entrance door structures perform many functions, the most important of which are security and aesthetic design of the opening. The choice is always up to the user - wood or metal finish. Each of the options has its own characteristics. Over time, the taste preferences of the owner of the apartment may change. If the old canvas has ceased to please with its impeccable appearance, and there is no way to order leather vinyl and chipboard, MDF door panels will be the most cost-effective and quick solution to the problem.
MDF is a substitute for natural wood, which is a medium-density fiber type board. In a number of characteristics, it surpasses wood (subject to the observance of production technology). In our country, he received recognition relatively recently, but has already managed to win the favor of millions of buyers who order goods for self-finishing in online stores or in warehouses.
The production of plates goes through three mandatory stages, none of which can be skipped. Cleaning of wood from bark with subsequent processing into chips - basic work to obtain a valuable product, thanks to which the skin will be durable.
Thorough rinsing of wood chips without the use of chemicals to remove foreign materials, dirt and sand.
Treatment of purified raw materials with steam (100ºС), which makes it possible to give the final product such characteristics as moisture resistance and preservation of its original appearance, regardless of weather conditions.
Drying in a special chamber.
This technological process makes the boards both strong and pliable, it is easy to give them desired shape using special tools. Sheathing the canvas and finishing the opening is a process that can be easily implemented with your own hands, following the sequence of installation of each individual element.
The reason for the popularity of plates
MDF has a number of undeniable advantages over cheaper and more expensive finishing materials. In the manufacturing process of these boards, a special binder is used - lignin, which is obtained from recycled wood. It is completely natural and does not harm human health.
Based on the quality composition finishing material, the following advantages can be identified:
high level environmental cleanliness,
wear resistance,
resistance to the adverse effects of the external environment.
Many suppliers offer to purchase chipboard, motivating them with higher operational characteristics.
The table shows Comparative characteristics two main properties of products that affect their durability and the specifics of installation.
Properties
Chipboard
MDF
Density
600-750 kg/m3
720-870 kg/m3
Pressed chip size
1 cm
0.5-1mm
The density of the door panels is high enough for the resistance of the skin to mild to moderate mechanical damage. Minimum size pressed chips in the composition of the material allows you to make the perfect finish of the opening, regardless of its configuration. This makes MDF the preferred material for manufacturing. door panels.
Installation process: materials and work steps
You will need:
self-tapping screws,
hammer,
screwdriver,
ruler (roulette),
decorative panels Sibu or standard.
The installation of the canvas begins with the production of all measurements. The resulting figures must be rechecked several times to reduce the risk of incorrectly cutting the panels.
The inner and outer parts must first be cleaned of accumulations of dirt and dust, ideally the surface is degreased with ethyl alcohol. Sheathing the opening is a responsible process, because even one missed mandatory step can lead to a departure of the MDF section from the base. If the entrance structure is made of metal, it is worth using a special anti-corrosion compound that prevents the occurrence of dampness and rust inside the structure.
Panels are taken and applied on front door to the intended attachment point. This will allow you to determine the location door handles and other accessories. Holes are carefully made; size matching can be determined by attaching a previously removed handle.
Fastening is carried out on self-tapping screws, first small holes are made along the perimeter at regular intervals (10-12 cm). Do not worry that the bolt heads will be visible - the final stage of fastening will be the installation of the external decorative part.
Processing of openings is carried out in a similar way and solves two important tasks at once - aesthetic design and thermal insulation. Cold air from the outside will stumble upon a significant obstacle and will not penetrate into the apartment as intensively as when metal version finishes.
Interesting options design
One of the novelties in the construction technology market is Sibu decorative plastic. Finishing with it helps to build on new level interior and exterior door leaf. The product is based on impact-resistant polystyrene, and the surface can have different textures and shades: metallized, mirror, diamond in tones from rich dark to silver or golden light.
Polystyrene belongs to the category of reliable and environmentally friendly substances, absolutely safe for human life and health. Purchased from a trusted supplier, Sibu Decorative Laminate is the perfect finish for door leaf and opening. Smooth or structured - the choice modern man who strives to make his home not only functional and comfortable, but also beautiful.
In an attempt to save money, many decide to trim on their own, having previously studied all the details and nuances, having watched a lot of training video courses. The event, with serious preparation, should end in success. Professional finishing with these door panels will ensure structural strength and durability, as well as emphasize the impeccable taste and sense of style of the apartment owner.

The entrance groups, on which the masters of the past worked, are distinguished by their beauty and durability, but antiques are inaccessible to most because of their high cost. But there is a way out. Fans of retro style, having decided to decorate their home, can install antique products. There are ready-made designs in stores, but you can save money by making them yourself.

In order to make antique doors with your own hands, you do not need to be a cabinetmaker or graduate from an art school. Having decided to do the work with your own hands, you need to choose a technique. It will help you quickly change interior doors from solid pine and other species.

Not all materials are suitable for creating things in retro style. For example, it will not be possible to age plastic and metal, and wooden doors will not only retain their original appearance, but will also become even more spectacular.

In order to artificially age things, it will not take large financial investments. It is best to work with entrance groups that are made of glued wood or solid wood. For creating original interior can be used the following options processing:

• toning;
• brushing technology products;
• leaf patination;
• craquelure.

There are other methods of surface treatment, not all of them are mechanical. With your own hands, it is easiest to process products with milling or a door leaf that has a thread. Such structures can easily be converted into retro style, and all thanks to the rapid aging of the protruding elements.

Today, there is a wide selection of MDF doors on sale, but keep in mind that not all of them can be made old. Only those products, the surface of which is covered with a thin layer of natural wood, are subject to processing.

Before starting work, the door leaf must be prepared. First, the sash is removed from the hinges. She is freed from locks, door handles and other fittings. When dismantling, you need to act very carefully, because it is easy to damage the product.

How to paint antique doors

There are several processing options, using which you can artificially age the wood. This can be done in the following ways:

1. Heat up with a hair dryer. Remove cover with a spatula.
2. By using solutions that remove paint.

When the procedure is completed, it may turn out that the solid wood after removing the paint has an uneven color. To remove the defect, you should take a bleach that is available for treating wooden surfaces. It is diluted in a ratio of 1: 3, and then applied with a soft roller to the surface.

If cracks, scratches or chips are visible on the surface, these places must be covered with a large amount of putty. It is chosen taking into account the color of the wood. A light mass is applied to the pine, after which the surface is polished - and the sash is ready for further processing.

brushing

Antique front door will decorate the interior of the room. It can be done using brushing. This is an affordable way with which you can easily age wooden products at home. It is based on the use of brushes that treat the surface. In industry, a milling cutter with a set of nozzles is used instead. At home, a similar result can be easily achieved using a metal brush with wire bristles.

The structure of wood is heterogeneous, natural fibers have different qualities. Some of them are more resistant to the influence of negative factors. environment, and the other is quickly fed to abrasion. The impact of time can be simulated. Swiping through wooden surface with a metal brush, the master removes soft fibers. Solid ones remain at the base of the canvas.

The brushing procedure consists of the following steps:

• The wooden door is laid on flat surface. The old layer of paint and varnish is removed from the base, for this they use a hot or chemical method.
• Soft fibers are cleaned with a metal brush or a milling machine.
• Nozzles with a softer pile remove chips from the surface.
• The wooden surface is polished, such processing makes the design more luxurious. On the product during finishing, it is necessary to apply wax or varnish.

Doors are often coated with oil and wax, which gives them a shine. There are other processing methods, on a light background they create the effect of scuffs and cracks.

Stain painting

In order to emphasize the texture of wood, it is treated with wood stain. The composition penetrates deeply into the pores, the reaction with tannins begins. As a result of exposure to the product, the fibers rise, the structure of the tree becomes more embossed.

It is convenient to apply the stain with a brush or a foam rubber sponge. The wooden massif is painted several times, during the first application, the layer should be the most abundant.

When the product dries, the door is sanded and painted again. After completion of the work, the surface is rubbed with wax. The stores offer a wide range of stains, so the buyer will find funds for different breeds wood.

patination technology

This technique allows you to create light scuffs on a wooden surface in several stages. First, the array is treated with sandpaper, then you can start painting.

The paint is applied in 2 layers. The first should dry well. The second layer is applied using brushes with soft bristles, then in some places the surface that has not yet dried is rubbed with a rag.

Canvas wear

Scuffs are recommended to be done with paraffin and paint, they are applied alternately. When the surface dries, it is treated with a spatula. Then the door is sanded and stained. When the work is completed, the product is rubbed with wax.

Many people know how to restore old, time-worn doors. But sometimes the style of the interior requires that it be decorated and complemented by antique doors. But where can you get them? And how much can they cost?

You should not even try to answer these questions, it is better to read how you can artificially age existing or just purchased canvases. Of course, it's mostly about wooden products. Although some methods of such finishing are suitable for other materials.

To make the work go faster and more fun, and the quality is not affected, before starting work, the doors must be removed from the hinges, all fittings must be dismantled from them and laid horizontally on a flat, solid base.

Then they clean off the old coating. To do this, you can use a building hair dryer and a spatula. The paint softens under the action of hot air, begins to bubble and itself lags behind the base. It is easy to scrape off with a spatula (see).

Then we proceed depending on what final form the product should receive. All existing defects can be repaired with putty to match the wood: chips, dents, cracks. Or you can do the opposite and create with your own hands the very defects that allegedly appeared over many years.

How to do it:

• Chips are made with an ax or a heavy knife, after which their edges are polished with sandpaper;
• With the help of a thin drill or an awl, the chaotic moves left in the wood by bark beetles are imitated;
• A similar effect can be achieved if old bent nails without hats and pieces of wire are scattered over the door leaf and driven into the wood with a hammer, and then removed;
• With a thick drill, you can drill through holes and fill them with dark putty, depicting knots that have darkened with time;
• To get dents, it is enough to put heavy pieces of iron - bolts or nuts - into a dense linen bag and beat them with force on the surface.

In a word, to break is not to build. Surely you will find other considerations on how to disfigure the surface.

We grind

It is important! If you skip this stage, the paint and varnish compositions will lie down and be absorbed into the wood unevenly, and the surface will turn out to be rough and rough. To achieve perfect smoothness, after the first sanding, the door should be slightly dampened to lift the villi, and then removed with a fine sandpaper.

Now you can proceed to the main stage of aging. Choose.

Staining

Let's start with the simplest way. This is an antique door finish using a special stain staining technique. It should be of two types: water-based and solvent-based.

The work consists of the following stages:

• First coloring. For it, a water-based stain is used.

• washout. Immediately after staining, without waiting for the layer to dry, we take a wet rag or sponge and wash off the stain. But not entirely. Usually, corners, panels, depressions and cracks are left intact, as well as the edges of the boards if the door is planked. But from their middle, the tint is washed off.

• Processing of individual sections. To give the product relief and expressiveness, you can shade chips, recesses and edges more dark color using a thin brush.

Advice. If for the sake of a small amount of work you do not want to buy a tool desired color, it can be replaced with a strong solution of potassium permanganate, coffee, tea brewing.

• Second coloration. The second continuous layer of stain based on white spirit or other solvent is applied after the final drying of the door.

• Consolidation of the result. To preserve the effect, the product must be coated with a colorless varnish or antique wax.

In this way, you can finish both old-style wood, and furniture facades. It is also suitable for products covered with veneer. They will look like faded, but retain the old coating in the recesses and in some places.

Drawing "traces of time"

What happens if a wooden door is used for a long time, but the coating is not updated? That's right - the paint on the protruding parts will be erased. And if you do not use it, a kind of plaque, patina, may form on the surface. These are the changes that can be simulated.

scuffs

It would seem, what is easier: to paint the canvas and to peel off the paint in places with sandpaper? You can do this, but you won't get the desired effect.

It's better to do it differently:

• Prepare the door as described above and prime;
• After the primer dries, paint the canvas. It is possible not entirely, but only those areas where abrasions are expected;
• When the paint dries, rub some sections with paraffin, and then cover the entire canvas with paint of the main color - darker or lighter than the previous one;

• Wait for the paint to dry again and remove it with a spatula from those places that were smeared with paraffin.

In this way, furniture is often finished in the Provence style, which is characterized by light natural shades, so pastel colors are chosen for the paint.

But there can be no strict rules, so you are free to use any colors and in any order.

Patination

The creation of a "plaque of antiquity" is carried out by various technological methods. If everything is done correctly, then you need to use a special composition - patina. But she's expensive. At home, you can use the most in a simple way, short instruction which is shown in the table.

For example, a door frame is taken. By the way, when aging, do not forget about him, and about the extensions and other door frames, otherwise the canvas in it will look ridiculous.

Advice. It is very convenient to remove the top layer with a special metallized sponge - scotch brite. It is quite possible to replace it with the back hard side of an ordinary dish sponge.

Creation of cracks

When the doors are old, repeatedly painted, the coating on them often cracks, creating an artistic cobweb. But it is not at all necessary to wait for the appearance of such cracks, they can be made by yourself in just a couple of hours.

The technology for creating cracks is called crackle, and the compositions that contribute to their appearance are called craquelure. As a rule, these are varnishes with special properties. The ingredients included in their composition break the paintwork applied on top of it or the bottom layer.

Different varnishes act differently, they are one- or two-step, so you need to study the instructions before use:

• The easiest way using a one-component composition lies in the fact that craquelure is applied to a dried paint coating with a thin layer, and it cracks under the action of active components.
• Another method involves applying craquelure between two layers of paints of different colors.. In this case, the upper layer is broken, and the lower layer is visible in the cracks.

Using the crackle method, you can decorate not only wooden, but also iron doors antique. And also combine it with other methods of aging. See examples:

If you wish, you can do without special compounds, and get a similar result using other means, most of which can be found in any home:

• PVA glue. Glue is applied to the canvas in a thick layer and, not allowing to dry, paint it acrylic paint. After that, the painted product is dried with a building hair dryer. Under the action of hot air, the paint on the adhesive will crack.

• Vinegar. Ordinary table vinegar 9%, if poured onto a freshly painted coating, will also cause it to crack.

• Gelatin, egg white. When coating a door leaf with raw protein or brewed gelatin, it will not be the paint that will crack, but the coating itself. Therefore, the effect will be, but not so pronounced.

• aluminum powder. It is also called silver. The door is varnished and after 20-30 minutes they begin to dry it with a hairdryer. Too fast drying will lead to the fact that the composition will lose its integrity, the varnish will become covered with cracks. In them, you need to gently rub the powder, and sweep away the excess.

Whatever method you use, the result needs to be fixed. Therefore, after the final drying, the canvas is opened with a colorless varnish.

brushing

Brushing is the structuring of wood, the removal of softer fibers from its upper layer, as a result of which the surface becomes embossed. Doors and other products finished in this way look amazing and look almost indistinguishable from really old ones.

But it is not suitable for all types of wood. Oak, pine, larch, spruce, walnut, ash are considered suitable. But maple, beech, alder, juniper, pear or cherry are not brushed.

There are three ways of brushing: mechanical, chemical and thermal.

mechanical brushing

For it, you will need a hard metal brush or a drill with the same nozzle, a hard brush, a chisel and sandpaper.

• The wooden part is laid on a flat, stable surface and fixed. Then, with effort, it is cleaned with a metal brush until the depth of the relief seems sufficient to you. Processing is carried out strictly along the fibers, otherwise transverse scratches will ruin all the beauty.

• With the help of a chisel, you can choose deeper grooves in places, make chips along the edges, but this is not necessary.

• After brushing, the wood dust is carefully swept out with a regular hard brush. And then the product is covered with a dark stain.

• We grind the dried surface using sandpaper No. 60 (for pine) or No. 80 (for oak). The purpose of this treatment is to partially discolor the base, leaving all the grooves and grooves darkened.

• We remove the dust and lightly wet the surface so that the remaining small villi rise. And again we grind, but already with a zero to give smoothness.

• We apply a finishing decorative coating - oil, varnish or wax to fix the result and increase the practicality of the door.

In general, after machining, you can use any of the above methods. Patination and staining will look especially impressive.

Chemical brushing

For mechanical brushing, you need to be physically strong and hardy person, as this is a very laborious operation. But the work can be made easier if, before brushing, the wood is treated with chemicals that soften the soft fibers.

These are special preparations based on caustic alkali or acid, but some household products also have a similar effect. For example, liquids and gels for cleaning plumbing. They are applied to the surface without sparing, and left until the wood changes color.

Advice. Chemical brushing should be done on outdoors or in a well-ventilated area, using individual means skin and respiratory protection. The price of the issue is your health.

Then the chemicals are washed off with water, and the wood is treated with an acetic solution to neutralize the alkali residues. Then everything is as described above: cleaning with a stiff brush and decorative trim. But the job will be much easier.

The only drawback of the method is the grayed wood. Therefore, it is used only in cases where the door is supposed to be painted with opaque covering paints.

thermal brushing

Loose layers of wood under the influence of open fire burn faster than dense ones. This is also good for us, besides, you can save on stain, as the charred wood takes on a darker shade.

But let's not waste too much words, but simply show how thermal brushing is performed using the example of a small plank.

• We burn the surface with a blowtorch, trying to do it evenly, without burning the array too deep. The degree of roasting can be any, you choose it yourself.

• Now we take the brush again and clean out the burnt soft layers. We act until a wood structure not affected by fire appears.

• We sand the surface, sweep the dust out of the grooves and evaluate the result.

• If you do not like the result, turn the part over and continue to work with the brush in the other direction. But always only along the fibers. Then we repeat the steps from the previous paragraph.

If you wish, you can repeat everything from the very beginning - from firing, until you achieve the desired effect.

Advice. It is advisable to treat burnt wood with a flame retardant.

In conclusion, as usual, we open the door with varnish or apply another protective covering. And in order to give your door a finished look, it is advisable to choose the appropriate fittings for it: overhead forged hinges, bronze handles, etc.

Conclusion

We told you about those methods of aging wooden doors that are available to any home craftsman. You can supplement them with painting, carving, forging, if these types of applied art are within your control.

If you want to learn more about this topic or visualize how the transformation occurs new door in the old, watch the video in this article.

Today, such a finishing option as semi-antique doors with their own hands is quite popular. This is not surprising, because such a design looks harmonious in any space design. Some owners of apartments and houses prefer to purchase a finished structure and simply install it. Others believe that it is better to make such a canvas design with your own hands.

Antique wooden door painting

It is not difficult to age wooden doors. The main thing in this task is to act in a coordinated and sequential manner.

Before making semi-antique doors with your own hands, you first need to get rid of the past door covering. This will require some materials and tools, depending on the method by which the worn surface of the wood is removed.


There are several ways:

1. With the help of a special wash.
2. Some use a building hair dryer (fan) to carry out this mission.
3. A sander or sandpaper with different levels of grit is also suitable for removing the old layer of paint.

All of these methods have their advantages and disadvantages. The main thing is to clearly determine which is the most suitable. To do this, you should study the technology and the features that distinguish these methods from each other.

washout

This method can be called the easiest among all valid options. Rinse solution is applied to the entire surface old paint. At the same time, it is necessary to act clearly step by step instructions. The process of removing the old coating is to apply a thin layer of wash and wait a certain amount of time. The solution softens the surface and the paint soaks. After, it can be removed from the canvas with a scraper.

Building hair dryer

This method of removing the coating from old door checked and clean. But infrequently this method is used in reality, because the equipment is quite expensive.

An example of paint removal with a building dryer

Therefore, the option to clean interior or entrance doors from coating in this way should be considered by people who have an apparatus available.

The principle of operation of the fan heater is as follows:

This method of cleaning the surface is quite simple, it does not require much effort and the use of many additional materials and tools.

Sander or sandpaper

A method such as using a grinder or sandpaper is considered the most time-consuming.

At the same time, for best result Both a machine and sandpaper should be used. On the door leaf with a grinder, the top layer of paint is removed.

The process of removing paint with a sander

Places door structure, which are hard to reach, are processed manually with sandpaper. When choosing any of the three methods for removing old paint from a surface, you should carefully consider the procedure. After all right start work promises a satisfactory result in the end. The stage of removing the old coating from the surface is the most time-consuming and dirty. Further work will be much more pleasant.

Read also

Sliding doors for storage room

Methods for processing wood to create antique doors

Every woodworker can tell about different ways wood work.

Antique wood finish example

Modern people who decide to paint antique interior doors usually choose one of three material processing options:

1. By using chemical compositions.
2. By heat treatment (firing).
3. And also mechanically (brushing).

Each of the methods differs in the level of labor costs, as well as in the need to have additional skills in such processes.

Chemical method

It is carried out, as the name implies, with the help of chemical compounds. This method can also include painting the door structure. For this method to be safe and give the desired result, you must:

Important nuance

It is permissible to process with a similar method only structures built from species of deciduous trees.

Heat treatment

It is carried out with standard tools that work with wood. Usually the main unit is a soldering iron, which burns out the forms on the canvas, creating a realistic semi-antique relief.

Antique wood burning

Important nuance

This method of wood processing can be applied to door panels constructed from different types of trees.

Mechanical restoration

This method is for those people who do not want to purchase Additional materials and tools to make a wooden door look like an old one.

Important nuance

This method of finishing is suitable for structures made of oak or coniferous wood.

Antique woodworking process

Before you design an antique front door, you need to decide on the technology for creating such a product.

Thermal Method Step by Step Guide

A step-by-step guide to chemically treating an antique door

In order to correctly carry out the procedure for remaking the door antique, you need to study in detail the stages of work. In this way, you can achieve the desired result, regardless of whether metal door finishes the owner of the apartment or wooden. The main thing is to act in the correct order:

What are the mechanical processing methods

There are three mechanical methods for creating antique doors. These are:

• brushing method;
• craquelure method;
• by using stain;
• patination method.

Example of patinated wooden door

Each of the methods differ from each other, so it is worth studying each of them before placing a bet on one of them.

brushing

When brushing the surface appearance the relief of the structure will not differ much from the option with thermal or chemical method. The procedure is carried out in the following way:

craquelure

With this method, the effect can be achieved interesting, and most importantly, unpredictable. The work is done in just a few steps:

Options for decorating doors with craquelure

Staining

If the doors are made of wood, then the effect of antiquity can be given to them using the stain known to everyone. By working correctly with stain, you can achieve the effect of antiquity of the door structure. To do this, proceed in the following order:

In old houses, entrance and interior wooden doors are usually very durable. They are distinguished by high quality factor and reliability, since in their manufacture they used wood from high-quality material (oak, etc.). Many owners are in no hurry to replace such doors with new metal or plastic ones. How to paint an antique door?

If the design of the house is made in the old style and furnished with antique furniture, then the most suitable option coloring his door will serve as painting with the effect of antiquity.

To answer this question, you need to familiarize yourself with the tips and recommendations for carrying out such work. Now it has become fashionable to paint antique doors, especially since new paintwork materials have appeared and technologies have become available for doing such work on their own. If the design of the apartment is made in the old style and it is furnished with antique furniture, then the most appropriate way to paint the doors is the so-called aging.

This process consists of the following components:

First of all, it is necessary to remove the old paint or varnish to the main surface of the tree with a spatula.

1. Unscrew the hinges, locks, latches and handles (if any on the doors). This work must be done slowly, otherwise chips may result, the processing of which will take additional time.
2. The entire surface of the door must be cleaned of dirt and dust. This is done with a sponge dipped in soapy water.
3. First you need to remove all the old paint or varnish to the main surface of the tree. To do this, the doors are set in a horizontal position (for example, they are placed on two benches) and the old coating is removed using a grinder or skins. If the doors are large, then the work can take a long time, especially if it is done manually. First you need to use a large skin, and then gradually switch to fine emery.
4. After that, you need to sand the very surface of the wooden door.
5. If there are depressions or cracks (slits, scratches) on it, then they must be puttied and, after the trimming layer has dried, sanded. For putty, mastics and other similar materials are used, matched to the color of the base layer of wood. The work is done with a rubber or plastic spatula.

You can remove the old layer of paint with special solvents that are applied with a brush.

Can be used to remove old paint and more modern materials, for example, a special gel or liquid that can be bought on the construction market or in stores of a similar profile. These products are applied to the surface of the door with a roller or brush. If an aerosolized chemical is used, it is sprayed onto the surface of the wood for a few minutes. If the layer of old paint is thick enough, then this procedure is carried out several times. Exfoliated paint is removed with a spatula.

Some use in such cases a building hair dryer or a blowtorch. But this method cannot be applied if the doors have glass inserts. They must first be removed and only then thermal paint removal should be used. It is better for inexperienced people not to resort to such methods, since when using, for example, blowtorch, scorch marks may remain on the wood, which will negate all the work. In this case, you will need to follow the safety rules.

Often, after removing the old coating, it turns out that the wood of the door has an uneven color in the form of light and dark places. For alignment colors you can use special bleaches for wooden structures. They are diluted in a ratio of 1:3 in water and applied to the tree with a roller.

After this treatment, the paint is easily removed from the surface of the door. Then it is polished with a fine sandpaper and cracks and depressions are puttied.

Antique door painting technology

This work consists of several stages:

1. First, to get the desired color, practice on any wooden board, cover it with stain. After the desired color scheme is obtained, you can transfer the process to the door: the entire surface of the object is covered with stain.
2. For this, a special tampon is made: a piece of cotton wool is wrapped in cotton. When working, stain is added to it so that the liquid cannot leak out. The tree is covered with several layers until the desired color density is obtained. The next layer of stain is applied only after the previous one has dried. If there are glass inserts on the doors, then they must be pasted over with a protective masking tape.
3. To give the door an old look, it is necessary to artificially make scuffs in its corners, near the keyhole and at the handles. There are two ways to achieve this.
4. The first method is called brushing. To do this, with the help of metal brushes, the entire surface of the door is treated, thus removing the upper, softer layer. A rougher relief surface remains. Using toning, you can achieve the effect of "patina". With the second method, scuffs can be created using paint of different tones.
5. Then, with a brush or roller, cover the entire surface of the door with a colorless varnish, in several layers. Sometimes, after this operation, the hairs of the tree remain upright. To remove them, these places are polished with fine sandpaper.
6. A few more layers of colorless varnish are applied.
7. Locks, handles and hinges are installed on the door, they are mounted in the proper place.

Necessary materials and tools

1. Wooden door.
2. Putty (primer) for wood.
3. Sander.
4. Sandpaper (large and small).
5. Gel or paint remover.
6. Stain.
7. Bleach for wood surfaces.
8. Building hair dryer or blowtorch.
9. Metal brush.
10. Masking tape.
11. Cotton wool and cotton fabric.
12. Roller or paint brush.
13. Rubber (plastic) spatula.
14. Colorless varnish.
15. Screwdriver.

If you need antiquity on a new door, then all of the above technologies are applicable without changes. Only the pre-preparation process is excluded.

It is possible to do such work on your own only with the phased implementation of all the above recommendations.

- the task is quite on the shoulder even for a beginner.