Useful crafts from improvised materials. What homemade products for the household can be done with your own hands

Someone will certainly take a look at this collection of ideas and say that it is easier to buy new furniture or decor. But this article is not for them, but only for true connoisseurs of the unique style and products. self made. Here you will find the 10 most beautiful interior items that you can do for your home without spending extra money.

The best crafts for the home with your own hands from improvised materials for 2018!

1. Decoupage and other do-it-yourself furniture repair ideas

Restoration of old chests of drawers and sideboards is perhaps one of the main trends of our time. Many pieces of furniture fail over time: tables and chairs become loose, cushioned furniture is pressed through and requires a new "stuffing". But chests of drawers and sideboards can stand for themselves long years and bother you with their outdated appearance.

Home needleworkers and decoupage masters have not only found a way to update the design old furniture, but also raised the fashion for the use of vintage "grandmother's" chests of drawers in the interior. Detailed instructions on painting and decoupage you will find in our article .

Below are some photos of amazing home projects to inspire you.

Restoration of an old chest of drawers with replacement handles and hand painting:
Painting and finishing an old cabinet with metal buttons:
As a result, the furniture acquired an original Moroccan-style decor effect. Simple, like all ingenious:

By the way, in this way you can create more sophisticated things for the home:

Decoupage and painting amazingly transform old furniture facades, but not every person has enough time and patience for this painstaking task. Therefore, the best DIY home ideas also include refurbishing furniture with duct tape in marble, gold, and other unusual finishes. A minimum of effort - and the most ordinary piece of furniture will turn into the main decoration of your interior.

2. Beautiful things for the home with your own hands: carpets

Perhaps the most pleasant thing about creating things for the house with your own hands is when one of the guests asks: where did you get such beauty? A stylish rug with a zebra print (or other motif of your choice) will certainly deserve such a compliment. And not once.

The fabric can be any. The main thing is that it should not be too demanding in care: it is not afraid of moisture and is easy to clean. In this case, the master chose the vinyl fabric. It is heavy and strong enough to look like a true carpet. What's more, the quality of vinyl these days is very impressive, and it's available in a wide variety of colors and interesting textures.

All necessary materials and tools:

Thick paper;
Vinyl upholstery;
Scissors;
2 Krylon pens or regular fabric paint.

Procedure:

Create a paper stencil. Draw and cut out the outline of the zebra skin, then the drawing itself on it. Do not worry about your artistic talent - the skin of a zebra and should not look uniform or symmetrical. In extreme cases, the pattern can be copied from a picture on the Internet or even printed out to cut out.
Attach the stencil to the vinyl fabric and outline the stripes with Krylon pens (spray or brush). After that, the stencil can be removed and continue to paint the areas inside the contours.
Let the paint dry and you're done! To be sure the pattern will hold, you can "seal" the carpet by spraying a clear coat of acrylic spray paint over it.

Krylon handles create a stunning gold leaf effect on the surface of the fabric. In addition, the paint in them dries quickly and is very securely held. If you cannot buy them in your city, then use regular paint for fabrics or walls. As the next hero of our article.

He took a cheap white rug as a basis and decided to give it an interesting look with his own hands using a chevron pattern. All he needed was thin duct tape, scissors, a thick brush, and two different shades of latex paint.

Finally, another inspiring example where a makeshift stamp is used instead of a stencil. The craftsman had a rubber bath mat, leftover wall paint (which had been slightly thinned with water for a vintage effect), a roller and an old IKEA wool rug. We look at the photo that he managed to cook from these ingredients.

3. Unusual "marble" DIY crafts (photo)

7. Turn photos into wall decor

This is much cooler than just hanging photos in frames! Your personal photos or any images you like from the internet can turn into beautiful wall art for any room. To make such a decor with your own hands, you can use any of the following methods.

Find or buy a substrate. A thick sheet of polystyrene foam or polystyrene foam (as in this case), a board and other improvised materials can act as it.
Print the photo, having previously edited its dimensions so that they are about 5 cm larger than the substrate. These "extra" centimeters will go to the folds.
Cut the photo and backing into pieces if you want a modular set rather than the whole picture. Otherwise, skip this item.
Overlay the photo on the substrate and wrap the ends. The author of this product used double-sided adhesive tape to secure the photos. You can mount on ordinary glue or others available funds. The very surface of the photographs can also be treated with glue or gloss paste.

Print the image and prepare the canvas to which it will be transferred.
Pull the canvas over the frame and apply a thick layer of medium gel on it. These gels are widely available and today you can buy them in any store of finishing materials.
Place the photo on the oiled canvas and press down. Leave it like this for several hours, but periodically sprinkle with water from a spray bottle.
Carefully, use your fingertips to start erasing the back of the image from the canvas. Remove all paper in this way.

As a result, you will get a beautiful one with scuffs that will only give it a touch of vintage style. It remains only to apply the last layer of medium gel on it as a protective coating.

For inspiration, here are a couple more ways to decorate your interior with a photo.

We apply the old window frame as a photo frame. How do you like the idea?

8. Creative homemade lampshades for lamps

Homemade lampshades made of fabric, paper, thread and other improvised means will not only decorate your home, but also bring an unusual atmosphere into it every dark time of the day.

Look for the best ideas for your taste in our article . The next photo shows a popular creative thread lampshade.

9. Succulents - do-it-yourself living home decor

A succulent living wall is perhaps the most amazing DIY craft you can make for your home. Agree: if you saw it in someone's design of a living room or another room, you would not be able to remain indifferent!

Dekorin will tell you how to get such an impressive and sustainable decor:

You will need a shallow wooden container for planting and a metal mesh.
To fix the mesh on the container, use an impromptu wooden frame, which can be made from small boards or chips. Attach to staples or nails.
Prepare any for composition. They easily take root in the most difficult conditions and look best when you combine different shades and shapes of leaves. Common examples of succulents: aloe, different cacti, young or stone rose (Sempervivum), stonecrop (Sedum), mountain grate (Orostachys), etc.
Fill the container with soil and plant your chosen plants in it. Use any cactus mix for drainage.

Here are examples of crafts for the home that you can do with your own hands using the above method.

10. Crafts for the house with your own hands from glass containers

Glass bottles and jars often accumulate on balconies and in pantries. What they are not turned into today: lamps, candlesticks, vases, table decor ... It's amazing how easily they become part of stylish interior, one has only to apply a little ingenuity, as well as paints, fabrics, threads, paper and other improvised means. Last batch of photos for today. Also read:

10 best ideas what you can do at home with your own hands updated: March 21, 2018 by: Margarita Glushko

According to the results of many experiments, it can be seen that hand-made production of unique and non-standard souvenirs is very exciting and interesting job. It promotes the development of flexible thinking, creative taste and aesthetic imagination.

Participation in such a cognitive process is within the power of even small children, because making crafts from improvised means with their own hands takes even not assiduous and not very obedient children for a long time.

For the manufacture of any materials of natural and artificial origin. After all, improvised raw materials are always available and do not require any waste.

And masterpieces that are made from materials that are no longer needed or not suitable are fully competitive with store counterparts, since they have no analogues. Such products will organically fit into any interior, which will add to it exquisite originality.

What crafts can be made from improvised means

various photo frames;
coasters for hot cups;
many different toys;
decorations for every taste and color;
key holders;
original quilling souvenirs;
different candlesticks;
skillful crafts for flower beds and garden plot;
designer suits and dresses for matinees;
playground design for children;
graceful decorative flowers;
interesting decorations;
and many other various design masterpieces.

To make it easier to make souvenirs with my own hands, photos of improvised crafts that can be found on the worldwide web will help with this. No need to copy, you just need to understand the technique of work and do something of your own.

By the same principle that postcards are made, it is possible to make a bright panel from paper and cardboard. But in this case, in order for the souvenir to look complete, you also need to think about a frame that can be made from various materials.

Instructions for crafts from improvised means

Let's take a closer look at the example of crafts from plastic bags - kite which the kids love so much. For manufacturing, you need to prepare:

2 bags with polyethylene;
2 skewers;
scotch;
black marker;
scissors;
fishing line, which can be seen with strong threads.

The process of creating a masterpiece:

Straighten the bag and put skewers on it, as if in a cross, but the longitudinal should be a third higher, from the middle. Now, with the help of a marker, you need to draw lines that connect the ends of the skewers.

Then, it is advisable to cut out the figure that turned out. Tape the skewers to the bag with adhesive tape.

From the second plastic bag, you need to cut a piece, 4-5 cm wide, of any length - for the snake's tail. It is possible to make a tail from several short pieces of packages, having previously combined them with tape. After that, you should tie the tail to the lower half of the flying kite.

At the end, you need to make a hole in the place where the skewers cross, and securely tie the fishing line there. Ready!

Step by step crafts for beginners

To make crafts - a goose from kinder eggs, you will need:

yellow testicles from kinders;
buttons: 1 for the nose, 1 for the tail and 2 for the eyes;
ribbon;
awl;
elastic thread;
glue.

The process of creating a masterpiece:

With a preheated awl, all the eggs are pierced, one opposite hole.

Then an elastic band is threaded from the tail to the head. Next, you need to put on a button-nose and thread the elastic in the opposite direction, through another hole.

Since both ends of the thread appear in the tail, it is advisable to secure them using a button. Now you need to glue the eyes and strengthen the button on the tail of the caterpillars. In this way, it is possible to manufacture a whole family of similar caterpillars.

Master classes on crafts from improvised means

For a cardboard Christmas tree, you need to prepare:

cardboard;
glue;
scotch;
paints, felt-tip pens, pencils;
scissors;
glitter, stickers, or something else - for decorations.

The process of creating a masterpiece:

Cardboard must be folded in half and cut where it folds. The halves that came out are folded in half again.

On one particle, on the opposite side of the fold, half of the Christmas tree is drawn.

The sheets are folded together and cut along the drawn line; so two identical Christmas trees are obtained. Then you need to secretly mark the middle of both Christmas trees.

On one Christmas tree, an incision is made from the top to the middle along the midline, and on the second, from the bottom to the middle. Now, it is advisable to insert the Christmas trees into the cuts, and you get one lush Christmas tree.

For greater stability of the Christmas tree, adhesive tape is used - both halves are glued together with it.

To decorate the Christmas tree, pencils, felt-tip pens, sparkles, paints, etc. are used. At this stage, everything that only the imagination suggests is done.

Conclusion

Every parent who loves his child sooner or later thinks that it is useful for a child to do at least something with his own little hands.

Indeed, in the life of children more and more more space gadgets occupy, and real exciting activities have a much higher value. That is why making crafts from improvised means will be an ideal activity for kids and adults.

Photo crafts from improvised means

A summer cottage is the territory where you can give yourself the freedom to conduct numerous experiments and dream up plenty. This is manifested not only in interior design, but mainly in the design of the garden or vegetable garden. Inquisitive and inventive owners have not been guided by expensive and standard methods for arranging their sites for a long time, since there are many alternative solutions for virtually all areas of activity.

There are several varieties of vertical beds that allow you to optimize the use of free space. Custom designs - a great opportunity create an interesting design of the garden, vegetable garden, suburban area.

This type of beds in most cases is used for growing ornamental plants or herbs.

Materials for manufacturing:

Length downpipes regulated in accordance with the wishes of the owner of the site. However, bulky beds should not be made, as they can complicate movement around the territory.

Creating a bed

Stage 1. Create a container. To do this, we take a drainpipe, cut it in two lengthwise and put on special plugs on both sides.

Stage 2. We take the prepared metal holders, put them on the resulting frames for the beds.

Stage 3. We make holes in the pipe. They are made in those places where there will be metal fasteners.

Stage 4. We pass a cable or a strong rope through the holes made.

Stage 5. We fix the cable / rope with fasteners.

Stage 6. We fill the resulting beds with expanded clay and soil.

Stage 7. We plant plants in the beds.

Stage 8. We hang pipes to the chosen place. Sometimes a special wooden crossbar is placed for this, more precisely, a design in the shape of the letter “P”.

Step 9. Alternatively, you can make a special design for the pipes.

Important! A drainpipe bed is not resistant to strong gusty winds, so you should choose a place for it that is not blown from four sides by winds. Otherwise, the frame will quickly collapse, nullifying all your efforts.

A bed made from a plastic bag is another modification of vertical beds. It is extremely compact, functional and interesting in appearance. You can make such a bed in a couple of hours.

Materials for manufacturing:

durable polyethylene film;
sewing machine;
priming;
seedling.

In order for the bed to turn out to be strong, it is recommended to pay special attention to the thickness of the plastic film, which in this case will act as the "frame" of the structure. The minimum film thickness is 0.2 mm.

The process of creating a polyethylene bed

Step 1 . We cut out 2 rectangular pieces of film, the size of which corresponds to the size of the created beds. An allowance of one and a half to two centimeters should be left on each side. The recommended diameter of the beds is twenty centimeters.

Step 2. Sew the rectangles together, leaving only the top of the bag unconnected.

Step 3. We sew a handle to the future bed, the strength of which will withstand the weight of the bag filled with soil. It should also be noted that when watering, the weight will increase.

Step 4. Fill the bag with fertilized soil.

Step 5. We make horizontal cuts on the bag in increments of twenty centimeters. They are necessary in order to plant seedlings in the garden.

Step 6. We plant seedlings.

Step 7. Water the soil regularly and add the necessary fertilizers.

With these simple steps, you can get a cheap and useful garden bed.

An integral element of each suburban area is a compost heap. This is the place where all kinds of biochemical reactions take place that ensure the creation of fertilizers.

To create fertilizers that will satisfy all the requirements for them, several key steps should be carefully considered: creating a container and directly making the compost itself correctly. Let's talk about each of them in more detail.

Stage 1. We take eight supporting posts of the same length.

Stage 2. We process the lower part of the wooden posts engine oil or tar.

Stage 3. We dig the posts into the ground so that they are reliable and stable. If a compost bin will be located next to the fence, then 4 columns (that is, one side) can be attached to the fence. This will avoid having to dig 4 holes.

Stage 4. Between each two adjacent columns we nail the crossbars in such a way that in the end we get three independent sections. Be sure to leave gaps that will serve as ventilation holes.

Stage 5. In two sections, horizontally nail the boards to half the height of the pillars. In these places, it is planned to create two small doors.

Stage 6. There will be a large door in the remaining section, so only one board should be nailed. It should be located at the very bottom in a horizontal position, that is, like a regular crossbar.

Stage 7. Install the covers. To do this, you can use one large solid board.

Stage 8. We install the doors prepared in advance.

Stage 9. We provide doors with handles and latches.

Stage 10. We process wood using special impregnations.

Stage 11. We paint the box in any color that matches the preferences.

Many gardeners mistakenly believe that any components can be dumped into the compost heap. In fact, in order to create the right biofertilizer, the “ingredients” must be carefully selected.

Among the mandatory components of the compost heap are the following components:

peat;
ash;
needles;
tree branches;
leaves;
hay or grass;
wood ash;
plant roots;
raw vegetables and fruits, etc.

All elements are randomly mixed in the heap. To speed up chemical reactions it is recommended to cover the pile with a tarp (this is especially true in the absence of a box).

Trips to the country with the family suggest the presence of entertainment elements on the site that will delight children. The most common way to occupy young summer residents is a swing.

Building a swing yourself is not an easy task, but quite doable. Of course, you can always take a stick, tie it with a rope and hang the structure on a tree, but this can hardly be called a full-fledged swing. Real craftsmen prefer to build convenient structures with comfortable place for sitting.

Structural components:

two logs;
strong rope.

Indicators:

log diameter - 85 mm;
log length - 700 mm;
the distance between the ropes is 500 mm.

Making a swing

Stage 1. We stretch the ropes between the logs.

Stage 2. We wrap each log with ropes.

Stage 3. We release the ropes out.

Stage 4. We tighten the ropes by 3 knots.

Stage 5. We fix the swing on the tree.

Important: such a swing is designed for only one person.

Garden path from improvised materials

There are several types of garden paths that you can easily do with your own hands.

Step 1. Remove the sidewall from the tire using a knife or saw.

Step 2. Cut the tires.

Step 3. We line the space with corrugated stripes.

Step 4. Paint the track with paint.

Step 5. Sprinkle with stone chips.

This is an economical option for those who do not want to rack their brains and spend time on a full-fledged garden path. Tire track is usually used for vegetable gardens, as it easily fits into the ground.

Stage 1. We paint the corks in different colors.

Stage 2. We dig a small trench.

Stage 3. We drive in supports to strengthen the future track.

Stage 4. We construct formwork using boards.

Stage 5. We install spacers along the edges of the trench.

Stage 6. We place crushed stone deep into the trench and carefully tamp it down.

Stage 7. We make a solution of sand, cement, glue and water.

Stage 8. Pour the solution into the trench.

Stage 9. We press the plugs in random order. Smooth multi-colored stripes look interesting.

These are the simplest and quick ways make a garden path without purchasing expensive materials.

DIY tools

The expression “everything will come in handy on the farm” turns out to be as relevant as possible when it comes to canisters. From this plastic container you can make a large number of indispensable tools that are actively used in the process of dacha work.

To make this tool, we only need a sharp knife and a container directly.

Stage 1. Cut off the bottom of the canister.

Stage 2. We mark the cut line for the scoop on the container so that the handle from the canister is the handle of the future tool.

Stage 3. Cut off excess material.

As a result of these simple steps, we get an excellent scoop with a comfortable handle.

Materials:

Manufacturing

Step 1. Thoroughly wash the canister so that no odor remains in it.

Stage 2. We cut the canister vertically into two parts.

Stage 3. We make a groove on the plank using a woodworking machine.

Stage 4. We apply glue to the plywood and insert it into the bottom of the canister.

Stage 5. We paint the resulting shelf with a can.

Of course, this design will not withstand a lot of weight, but it is quite suitable for storing small parts.

Materials:

40 canisters;
scissors;
rope;
paper;
marker.

Stage 1. We pierce the top of the cans with a knife.

Stage 2. We make a stencil out of paper.

Stage 3. We apply it to the canister, circle it with a marker.

Stage 4. Cut out large holes with scissors.

Stage 5. We put the prepared canisters in several rows, tying each row by hooking the rope under the handles of the containers.

Stage 6. We tie the entire rows around the perimeter for greater strength.

Stage 7. If the cabinet is planned to be leaned against the wall, then we drill it to the surface.

Stage 8. We put heavy objects in the bottom row - stones or bricks.

The result is a fairly roomy and functional rack that will help get rid of the issue of storing many small parts.

Be resourceful and bold in implementing your ideas. Good luck!

Video - Do-it-yourself homemade products for summer cottages

Video - Do it yourself for a summer residence

Every home owner wants to feel as comfortable as possible in it. This becomes the reason that there is a desire to decorate the interior not only beautifully, but also in an original way.

However, often the funds for this are not enough, because the services of professional designers, like beautiful things, are not cheap. Therefore, in recent times an increasing number of homeowners prefer to independently decorate the interior of the house with the help of crafts from improvised means, which are cheap.

It is worth noting that the main advantage of such crafts is not the cheapness of materials. The most attractive circumstance is that each thing created by you is unique. But it is the uniqueness of the design that attracts attention.

From products that were created with his own hands, a special energy emanates. And thanks to this, an atmosphere of comfort and warmth appears in the house.

An important circumstance is the fact that such designs can act not only as ordinary decorating elements. With their help, you can organize the space much more conveniently. After all, they can be used to store a variety of little things that are necessary for the economy.

Do you think that this is impossible, because you need to have some special skills? No, even a child can handle this work of creating crafts.

Pay attention to the photo of crafts from improvised means, which is presented below. It shows an example of creating a key holder, which is not only a beautiful addition to the interior, but also serves as a small key hanger.

And the process of its creation is not complicated. Let's consider it in more detail.

Key hanger

Surely, many are familiar with the situation when you have to raise the whole family to the ears to find the keys. Indeed, often people do not burden themselves with the purchase of special small shelves for storing keys and other small things.

And since the key is pretty small items, losing it among the larger things is easy. To get rid of the need to constantly look for the keys, many keep them in their purses.

However, we can offer you a more interesting and original way of storage. And for this we will build a housekeeper.

Its main feature is that outwardly it will resemble a product decorated with brickwork.

We will tell you step by step how to make crafts in the form of a housekeeper from improvised means. But first, let's consider what kind of tools and materials will be needed to create it: a thick sheet of cardboard or plywood, thick napkins, hooks, glue, varnish, paints.

Stages of the housekeeper

At the first stage, you need to cut out the back wall of the future key holder. As a material, you can use either thick cardboard or a piece of plywood that is not too thick.

In the second step, you should cut out small rectangles from cardboard that will imitate bricks. Please note that they must be the same size.

In the third step, you must glue the cut out "bricks" to the base with glue. Remember that there should be a small gap between them. And also do not glue them on the entire surface of the product. Indeed, in the central part there should be a small plate with an inscription, and in the upper part there should be a picture.

Note!

At the fourth stage, you should start lubricating the bricks with glue. Do not feel sorry for the glue at this stage, because it is necessary for you to put a crumpled napkin on top of it. From above it can also be covered with a small layer of glue for better impregnation.

Using a stick or the back of a brush, press the napkin into the gaps to form corners. Leave the product to dry.

Please note that any crafts from improvised means at home should be durable. Therefore, we strongly recommend not to save on binding materials.

At the fifth stage, the process of creating a visual resemblance to natural brickwork. Once the panel is dry, cover it with paint. Seams must be painted over with bronze paint.

At the sixth stage, paint the bricks a second time. However, this time you need to use a dry brush. To do this, dip it in bronze masonry, wipe it on paper to make it dry, and then dip it again in the color you used to paint the bricks.

Note!

Remember that to achieve maximum similarity, you should move the brush in only one direction.

At the seventh stage, which is the final one, you should cover the finished product with a transparent varnish and attach the hooks on which the keys will hang.

Crafts for the backyard

If you are the owner country house, then for you the process of decorating is not limited only to the area of \u200b\u200bthe dwelling. Therefore, to improve the area around the house, you should use garden crafts from improvised means that will decorate any garden or vegetable garden.

To make them, you can use plastic bottles, hemp, tires and old soft toys. In this case, it all depends on what set of tools and materials you have.

Crafts from tires are very popular, because it is quite simple to create them, but at the same time they look original and interesting.

Note!

For example, you can create a real cup out of tires, which will become a wonderful flower garden. To create it, you will need one tire, a round board (the diameter of the board should be larger than the tire), paint, a small piece of rubber.

The tire and board must be painted in the color that you like. If you have the skills of an artist, you can use them to decorate the product with beautiful images.

In the event that you do not have such drawing skills, you can paint the design in one color or with polka dots. The handle of the cup should be secured with a large stapler. And now your product is ready.

We draw your attention to the fact that even children's crafts from improvised means can become a worthy decoration for your garden. Use the kids crafts they made from plastic bottles and glasses. Despite their simplicity, they look quite original.

If they have small size, use them to decorate your porch or window sills. Thus, you can focus on them, and they will not get lost in a large area of \u200b\u200bthe garden (garden).

Photo crafts from improvised means

Everyone is used to treating their home as a fortress, a cozy place where you can escape from the hustle and bustle. It is doubly pleasant when your own home is inhabited, everything in it is done at the request of the owner and the necessary things are at hand. It is pleasant to return to such a house after a working day or a long vacation, the atmosphere in it is soothing and bewitching.

In contact with

You can decorate your own home with your own hands. Homemade for household – It is not simple interesting idea for author's design, such things are gaining popularity in the world and even the most famous designers are hunting for masters "" who are able to make a real work of art. In addition, such lovely organizers seriously facilitate cleaning, help organize materials for hobbies, books, knick-knacks and jewelry. There are a lot of options for crafts for the home with your own hands, each author brings something of his own to the project, but in the end you always get something warm, homely and cozy.

Options for craft organizers for the home

There are several variations of various crafts made of metal, clay and plastic, but they are all aimed at a single goal - to make a person's life in the house easier and more comfortable. That's why all do-it-yourself crafts for the home can be conditionally classified into:

Ultimately you can make a craft just like that without bothering to find her useful application. In the end, making useful things for the home with your own hands from wood, metal, or plastic is just a hobby, which, however, can become the main business.

As for where to get materials and tools, fortunately, the modern market infrastructure allows you to find absolutely everything for needlework or carpentry in the nearest store.

Stool box for tools

Among homemade products for the home that you can do with your own hands, toolbox- this is probably the first thing to do home master. Such a stool is extremely functional and easy to create, the cost Supplies is incomparable with the market price of a good chair, and due to the extremely primitive design, the bench will last quite a long time. All that is needed to make such a homemade product for the home is:

screws, 20-26 pieces;
sled, 4 pieces;
a block of wood, 17 pieces;
wooden panel, 9 pieces;
screwdriver, hammer, varnish, brush.

A tree for such a homemade product should be chosen easy to work with, that is pine or beech. Hardwoods are highly undesirable, for example, oak, which is incredibly difficult to work with at home, not to mention the fact that doing a complete do-it-yourself processing is a time-consuming task.

From the bars you need to make four U-shaped blanks, one larger than the other. This is the basis of the bench and steps on the sled. Then you need to strengthen the legs with an additional bar. For a step, fix a slide on it on both sides. Make a niche in the form of a small box under the seat of the stool, then screw the side panels. Varnish the finished homemade product.

Cooler bag

Such a homemade product will come in handy on any trip.. It is unprofitable to buy it, since the cost of even the simplest one is higher than the price of consumables. And in order to make a bag yourself, you only need a few simple elements:

a roll of insulation;
old bag;
tape and scissors.

Of the insulation options, it is recommended to choose foam polyethylene, widely applicable in household purposes. Enough 1-2 meters of this material. From the insulation you need to make a cross with a central part, and then pack it in old bag. It is better to cut off the “lid” of the homemade product and attach it to the adhesive tape, fill the side joints with the remnants of insulation or foam rubber. You can make such a homemade product yourself in 20 minutes, no more, and in terms of efficiency it is in no way inferior to store-bought counterparts, since insulation is an excellent insulating material.

House-scratching post for a cat

House-scratching post made of wood- this is the most productive way to keep all the other items in the house intact by giving your pet a new toy to tear to pieces. Making it is quite simple, as there are many variations of the project. For the entry level, one house with a cylindrical scratching post is enough. This will require:

wooden panel, 5 pieces;
cylindrical bar, 1 piece;
wooden rail, 12 pieces.

The simplest house with a square roof, but you can do a more complex project for your pet - with sloping top or several levels.

Before work, the wooden elements should be covered with carpet, it is better to do it with self-tapping screws, but making sure that their tips do not peek out and do not damage the pet's paws. One of the panels will act as a base, the “foundation” of the house is mounted on it - 4 rails, a panel is fixed to each of the rails, then another level of rails should be added from above and the structure should be covered with a roof. Installation takes place on the corners or screws. An entrance must be drilled or cut into the front panel. Fasten the cylinder near the entrance, and then wind the string around the special glue.

Options useful crafts lots of, most options are copyrighted and invented literally out of necessity, that is, to solve a specific problem. In order to come up with something of your own, it is enough to overcome laziness and pay attention to those problems that prevent you from living in own house, and then solve them on your own, because it's very nice.