What is a miracle shovel, a description of the tool manufacturing process. A drawing of a miracle shovel and detailed instructions for its manufacture Scheme for making a miracle pitchfork

There is always a lot of work in the garden, but one of the most difficult and tiring is digging the earth. In small areas, such work is done with a shovel, but it takes strength. However, there is a special tool that will allow you to do this job with much less effort. A story about what a miracle shovel is, drawings and dimensions for its manufacture will be in this article.

What can a miracle shovel

This tool provides additional opportunities for the farmer.

The Miracle Shovel provides the gardener with the following benefits:

1. When digging the earth with its help, much less effort is required compared to using a conventional tool.
2. The quality of loosening the earth with such processing increases. If clods form, then during operation they break into pieces.
3. In some designs, a back stop is provided. In the process of digging the soil, you can step on it to help you immerse the tool in dense and heavy earth.
4. If there are roots of weeds in the ground, then a lazy shovel will get them out as a whole, and not cut them into pieces.
5. This tool is convenient to use for digging up potatoes.
6. The digging speed is much higher than when working in the usual way.

miracle shovel

In my own way appearance the excavator's shovel resembles a pitchfork with additional details.

It contains the following parts:

1. A shaft for which a person holds an instrument.
2. Metal forks with tines about the same length as regular forks but about twice as wide. They usually have 6 to 8 teeth.
3. A metal stop going backwards is attached to the forks. When immersing the miracle shovel into the ground, you can press on it with your weight so that the tool enters the dense earth more easily. It also serves as a stop when turning the shovel out of the ground.
4. In the forward direction, a horizontal grate is attached, installed in such a way that the fork teeth, as they rise, pass through it. With such a movement, clods of earth are between the pitchfork and the grate, as a result, they crumble into small pieces.

Here is a description of a typical CrotMan shovel. In practice, several different variants of its design are used.

Garden cultivator "KROTCHEL"

How to work with a shovel

In order to dig the ground, you need to stand with your back in the direction in which you have to move.

In order to use this tool, you need to do the following:

1. Stick a shovel into the ground. If this is difficult to do due to the density of the soil, you need to step on the metal stop.
2. After the shovel has entered the ground, the shaft must be tilted back without lifting above the ground. In this case, the earth that the pitchfork will hook on will pass through the grate and crumble.
3. Then the shovel, without lifting up, is shifted back and again immersed in the ground.

This process is repeated until the entire section has been covered.

Various tool options

There are fixtures that, although arranged in a similar way, have important differences in design. Next, they are described in more detail.

Soil loosener without front stop

In this type of design, there is no front stop. The grate for breaking clods is made without a front bar. This slightly reduces the weight of the mole ripper shovel. However, since there is no need to lift the shovel off the ground when working, this does not provide a significant advantage.

Soil loosener without front stop

digger

This option differs from the classic one in that it does not have a grill located in front. The handle of the tool is also made in a different way.

The digger consists of the following parts:

1. It uses a handle made in the shape of the letter "T". Therefore, in the process of work, the shovel is not held as usual. Hands hold the instrument by the horizontal crossbars. This helps to increase the force of pressure on the soil during work. In addition, such a handle is usually made of metal. It can move up or down. After a comfortable position is found, the handle is fixed with bolts.
2. The forks are attached to the handle at two ends, and not at the central part, as in the classic version.
3. The stop attached to the back of the tool is more powerful than in the usual case.

The disadvantage of this design is that soil crushing is not provided.

light cop

This option can be considered the simplest design. For her, a rectangular metal frame had to be invented, to which a pitchfork was attached, looking down. The stop, made rectangular, is attached horizontally. The front grille is missing.

On a note. In spite of simple design, this kind of miracle shovel is an effective tool for digging.

Archimedean shovel

It bears little resemblance to the classic version. The difference, in particular, is that here, not forks are used for digging, but a bayonet shovel. However, the inventor applied a similar principle here: the rule of leverage. This is an invention of Vladimir Kolybelin from the city of Kovrov, Vladimir region.

The Archimedean shovel is arranged in this way:

1. She has two shafts: long and short.
2. The blade of the tool is attached to a short shaft.
3. All parts are connected into one whole by a bracket. With it, a short shaft with a shovel in the middle is connected to a long handle and can rotate.

When working, the tool is stuck into the ground, slightly shifted forward long handle. Then they step on the short part, and, taking into account the law of the lever and the length of the shoulder, the shovel will lift the earth.

Important! Although the arhimedova shovel saves effort compared to conventional tools, it is difficult to use in heavy clay soils.

Archimedean shovel

How to make your own

You can make such a shovel yourself, but for this you need to be able to work with metal, for example, perform welding work. This section will tell you how to make a miracle shovel with your own hands, about the drawings and dimensions for its manufacture.

materials

The main part of the structure is made of metal. To do this, you can take a profiled pipe or corner. The thickness should be approximately 30 mm. In the latter case, the steel used is important, it should not be thinner than 3 mm.

Important! The teeth must be made of high quality steel. Suitable obtained from a pitchfork or those made on the basis of an automobile spring. It is recommended that the teeth be from 6 to 8.

The handle can be made of wood or metal pipe.

Dimensions

The width of the working part is usually from 60 to 80 cm. If you do more, then this will practically not add productivity. The recommended length of the pins is from 22 to 30 cm.

The length of the handle is made according to height. It will be convenient if it reaches the shoulder.

Blueprints

The figure below shows one of the options for how to make a shovel.

Miracle Shovel Blueprint

In accordance with this scheme, it is possible to independently manufacture a tool.

The miracle shovel greatly facilitates the work of digging the site. It can be done independently. If possible, it makes sense to purchase a high-quality purchased model.

Miracle shovel for digging the earth in recent times became a familiar instrument on the backyard or suburban area. At the same time, some devices have quite noticeably replaced the usual spades in households.

This popularity is due to the fact that the miracle shovel allows, with a significant reduction in the load on the gardener or gardener in the process of cultivating the land, at the same time speed up this process by 2-3 times.

Basic structural elements

From a technical point of view, these devices combine a ripper and a fork. Most of the designs at the same time include the following elements:

• forks for digging and loosening;
• stops (front and rear);
• fastening the handle;
• skids;
• cutting

If we describe the principle of operation of this mechanism, then in general terms it will be as follows: classic forks mounted on the back stop with the help of manual force transmitted from a person to the forks through the handle loosen the ground. At the same time, the second teeth of the pitchfork, placed opposite and entering the lock with them, break the clods of earth into small pieces in the process of loosening. As a result, it not only digs, but also loosens.

A front stop is mounted on the ripper, which provides stability to the entire mechanism. From the side, the miracle shovel in work looks like scissors, cutting and crushing piles of earth, and at the same time turning them into almost imperceptible lumps, which on light soils do not even need to be leveled with a garden rake.

Such a tool greatly facilitates the process of digging large areas of land, while this process accelerates several times. Having mastered the tool, you will be able to use it to independently process up to 20 acres of land. In the same case, when several miracle shovels are used on the site, it is quite possible to master a whole hectare.

Pros and cons of miracle shovels

The universal garden ripper, also known as the miracle shovel, has both positive and negative qualities. All of them must be carefully studied before you go to the store for a purchase. So, for example, to the merits this device include:

• the ability to work on a land plot with a sharply reduced physical load;
• a significant increase in the speed of digging the earth due to the use of wide pitchforks;
• ease of operation;
• the ability to dig all types of soil;
• high reliability of the ripper and its durability.

The disadvantages of the miracle shovels include:

• a very solid weight of 80 kg necessary for efficient work;
• difficulties with repairs;
• impossibility to make figured digging;
• lack of physical ability to dig holes.

Despite the presence of the described shortcomings, this garden tool is excellent for arable work in all types of areas. At the same time, miracle shovels can be used both for loosening the earth and for digging it before planting vegetables. For example, devices with pitchforks digging the soil 15-25 cm can be used to prepare the soil for planting:

• corn;
• potatoes;
• cabbage and other garden crops.

Plants such as peppers, cucumbers and tomatoes are planted in the ground with seedlings, not seeds, for which holes are made manually using a conventional shovel. But in the garden, the miracle shovel is practically useless, since it does not allow you to dig bushes and trees, dig a hole, or prepare holes for planting. In this case, all work will have to be done with a classic balance shovel.

It is also worth noting one more circumstance regarding the efficiency of the described ripper. The fact is that it makes sense to perform work only if the area of ​​the cultivated area is at least 0.5 acres. If she is less better ground dig with an ordinary shovel, as you will do it faster.

Varieties of universal rippers

As described above, miracle shovels have a very simple design, therefore, today manufacturers offer consumers a huge number of their varieties for sale, which allow you to change the depth of loosening and have additional functional elements in their design. In addition, many manufacturers of these devices do not prevent the dissemination of information on how to make a miracle shovel with your own hands, so you can also find home-made devices on sale.

As for industrially produced rippers, today the most common of them are the following types of these miracle structures:

• ordinary classic;
• "Plowman";
• "Mole".

The classic ripper is usually homemade and includes a backgauge and main forks. This design allows you to dramatically reduce the load on the body, and increase speed and productivity. However, at the same time, the clods of earth do not break, and this has to be done with the help of a garden rake. At the same time, this type of tool can only be used for digging black soil, which is regularly processed.

Since such a design was far from perfect, the inventors constantly improved it, as a result of which the Plowman and Mole rippers were born. So, the miracle shovel "Plowman" has a bayonet 10-15 cm long, which makes it easy to loosen soil of any type. At the same time, its distinctive feature is effective work with an employee weighing more than 60 kg. Recall that the classic miracle shovel can work with an employee weighing 80 kg.

As for the Krot ripper, its forks are 25 cm long and are designed for deep digging. At the same time, garden crops should be planted in this case immediately after digging the site. It is also worth noting that it is quite difficult to dig the earth with this miracle shovel, especially if it is compressed or is alumina.

Manufacturers also produce universal shovels without a name. They are intended for digging the soil to a depth of 15-20 cm, in the event that the depth of soil freezing in the region does not exceed 5-10 cm, and it itself is black soil. If the conditions for the cultivation of garden plants in the region are more severe, such devices can only be used for decorative digging.

Self-made miracle shovel

Sometimes factory-made rippers are not suitable for gardeners for some reason, in addition, they have a rather serious price. In this regard, many homeowners prefer to make them on their own. So, if you need a miracle shovel made by yourself, you can easily find its drawings, dimensions, as well as a video of the manufacturing process itself on the Internet.

Having figured out how to make a miracle shovel with your own hands, and having found its drawings, you can begin to select the tools and materials necessary to perform this type of work. Typically, assembling a universal ripper requires:

• portable welding machine;
• metal square pipe;
• metal fittings;
• grinder.

Before you start making a product such as a miracle shovel with your own hands, you should study the drawings and dimensions of this device. The main parameters in this case will be the depth and width, which depend directly on the depth of freezing of the soil at the location of the site, as well as the purpose of using the miracle shovel. So, such a ripper is used either for digging or for loosening the soil. If you are going to only loosen the soil, a depth of 10 cm will be enough for you.

When do you need a pothole in which they will immediately land vegetable crops, it will be necessary to assemble the ripper in such a way that it can provide a digging depth of 5 cm more than the depth of soil freezing. If the miracle shovel is assembled with your own hands, its drawings should reflect the named circumstance.

As for such a parameter as the width of the forks, it completely depends on your preferences and physical capabilities. At the same time, a width of up to 50 cm is considered optimal. If you have the opportunity to lift large masses of earth, you can easily make a ripper for yourself, using materials for this, by finding drawings and videos of making a miracle shovel with your own hands on specialized sites dedicated to making tools with your own hands.

Tool making steps

As for the assembly scheme of the miracle shovel, it is as follows:

• pre-prepared metal rods are cut to length and bayonets are made from them, which are then sharpened;
• cut off the carrier bar from a square pipe;
• the base of the cutting is made from a metal pipe;
• a thrust bar is made from the same pipe, it is bent in an arc and attached to the carrier bar;
• welding of all constituent parts miracle shovels among themselves.

This is a classic version of the miracle shovel. In order for it to also break up clods of earth, it will be necessary to additionally mount a ripper. It is welded in the same way as the main forks and is attached to a movable mechanism in order to be able to dig up sloped areas, as well as to better break up small clods of earth.

The process of making a miracle shovel is completed by painting it, as well as selecting a handle suitable for it. At the same time, sometimes, when the device turns out to be too overall, instead of a handle, 2 metal pipes are welded onto it, which are connected by a crossbar that forms 2 handles to facilitate working with this tool.

How a do-it-yourself miracle shovel is made: in this article we will get acquainted with the drawings and the assembly procedure for this simple and practical tool in the household.

Due to the design features, with the help of this shovel we can quickly dig a site. In this case, when digging, the earth layer does not turn over, but is well loosened. Thanks to this method of soil treatment, it is possible to easy way get rid of weeds.

Do-it-yourself miracle shovel: drawings, video

It looks like this:

Drawings of the details of the miracle shovel

metal tooth

Tooth profile

Emphasis

1. Assembly of the lower part of the shovel.

Shank stop

A pen

2. Assembly of the upper part of the tool.

When the work is finished, we proceed to the processing of welds with an abrasive wheel, and then to the application of paintwork to protect against corrosion. Now you have an easy-to-use and useful tool for working on personal plot which you made by yourself.

Work in the garden and garden is a troublesome and responsible occupation, requiring not only the application of physical effort, but also the use of high-quality, strong tools and equipment with high productivity. For manual digging of the soil, a bayonet shovel is usually used. But with age, such work becomes beyond their strength: the back hurts, fatigue sets in quickly, the joints ache.

To facilitate the work of gardeners, well-known manufacturers produce various modifications of tools. Among the wide range of models, there is sure to be a miracle shovel, which will greatly facilitate the work on the site.

Kinds

The classic version is a device in which "forks" are located on a metal panel, attached to it with the help of swivel joints. Translational-rotational movements are made: pointed rods plunge into the ground, digging it up. When the "forks" are pulled out of the ground, lumps remain, which additionally have to be broken with a rake.

Advanced shovels-rippers are models in which an auxiliary element is provided in the form of a transverse crossbar, on which the same pointed pins are welded as on the main part. "Pitchforks" plunge and exit the ground, passing through the gaps between the bars of the crossbar, crushing large lumps into small fractions. Grass roots cling to the pins, they can only be pulled to the surface.

Known modifications - "Plowman" and "Mole". The first has a length of loosening bayonets, reaching 10-15 cm, the second - 25 cm. The latter option is convenient in that it deeply plows the soil, catching a layer of freezing earth in the off-season.

In addition to the "Mole" and "Plowman", the model "Vyatka Plowman" is known, the drawing of which was developed by the monk Father Gennady. Due to the state of health, the clergyman had a very hard time working on a personal plot. He came up with a convenient and simple miracle shovel. Its manufacture requires a minimum of parts, and the performance of the tool exceeds all expectations. An arc-shaped steel plate is attached to the metal pipe on the left or right (depending on whether it is made for left-handed or right-handed people) (in homemade devices instead, you can use the main part of the bayonet shovel).

A pin is located at the end of the pipe, which immerses the plate to the depth of the excavated soil. Then a rotational movement is made, the clod of earth is easily thrown to the side with a shovel. If you dig a plot, taking steps in a straight line back, an even furrow remains. Potato tubers, root seeds are left in it. When the gardener starts working next row, then the fresh soil will lie flat in the furrow dug earlier. Father Gennady's homemade shovel was taken as the basis for similar models that are now produced by well-known manufacturers. Considering physical features person and his state of health, it is easy to choose suitable option wonder shovels.

Advantages

The advantages of new designs are that working with them does not require a lot of time and physical effort.

In addition, they are convenient because:

• labor productivity increases by 3-4 times;
• no need to bend down to the ground;
• you don’t have to strain your back muscles when the shovel moves up together with a clod of earth (when the earth is damp, it is even harder to do this);
• due to the rotational movement of the digging or loosening main element, only the hands that press on the handles that are attached to the handle are tensed.

When buying, you need to pay attention to what weight of a person the miracle shovel is designed for. For example, people no lighter than 80 kg can use the classic options, since the devices are rather bulky and difficult to move over the surface. But the Plowman design is suitable for gardeners weighing 60 kg or more. Father Gennady's shovel is much lighter than complex configurations, so a person who freely holds it in his hands will not be difficult to perform garden work, regardless of his weight category.

Flaws

The gardeners did not find any significant "shortcomings" in the miracle designs for digging the earth, but no one will argue with objective facts:

• The “working” grip of shovels-rippers can reach 40 cm, which means that in the area where seedlings are planted close to each other, it is a useless tool;
• a loosening or digging device (an invention of Father Gennady) will not be able to dig a deep hole;
• advanced models are difficult to repair in case of breakdowns, as they are made of a large number of parts.

The less elements, rotating mechanisms are provided in the device, bolted connections, the easier it is in routine maintenance and repair. Therefore, it is better to start making homemade shovels with a careful selection of a drawing, which involves the use of a small number of simple elements. For pointed rods on panels, handles, handles, it is necessary to select durable, corrosion-resistant materials. The ideal option in this case is stainless steel. A metal pipe is suitable for the handle, you can also make a bar and an emphasis from it.

How to make a model of Gennady's father?

N. M. Mandrigel, a resident of Dneprodzerzhinsk, proposed his own modification of the priest’s model. Its main difference is that used parts can be used to make the structure. To make a miracle shovel at home, you will need:

• bicycle steering wheel - for handles;
• a pipe made of stainless steel - for the handle;
• steel shovel - instead of an arcuate plate;
• movable steel pin or with a spring - for easy immersion of the main part into the ground (its height is adjusted depending on how deep the ground is being dug).

It is possible to make a shovel in several stages. If desired, it can be made in 1 day.

• The wheel is leveled. It will be easier to put pressure on him with your hands. Pieces from the old hose can be pulled onto the ends.
• The pin from below is pushed into the pipe with the sharp end outward. To give it a static position, a 2.11 M8 bolt is used.
• The steering wheel is welded to the pipe (to the opposite end from the pin).
• At the bottom left and right, a shovel is welded.

A person exerts light pressure on the handles, the pin plunges into the ground, and behind it is a shovel. The steering wheel makes a rotational movement to the left or right, and a lump of earth rushes along with the shovel to the side.

It is important to correctly select the height of the pipe to which the handles are attached. They should be located approximately at chest level. A resident of Dneprodzerzhinsk has developed a special formula for this, which is presented along with a drawing of a shovel.

Homemade shovel-ripper

When choosing a suitable model, difficulties often arise with the selection of constituent elements. The way out of this situation is simple: many houses have old sleds, pipes from strollers, fittings dusty in the garage. To make a shovel-ripper you will need:

• drill and file for metal processing;
• welder;
• measuring instruments (corner, tape measure);
• steel pipes or corners;
• reinforcement from which the teeth will be made;
• metal shank.

Details must be accurately adjusted in size and correspond to the height of a person. Therefore, the assembly of parts is carried out by first measuring them and cutting off unnecessary parts with a saw.

• The support frame is made from a metal pipe. It is bent in the form of the letter "P". If a top bar equal to 35-40 cm, then the length of the legs is 2 times more - 80 cm.
• A transverse auxiliary bar with teeth is made. They can be pieces of unnecessary reinforcement 20 cm long, sharpened on one side. If the bar is made of a pipe, several holes are drilled in it at a distance of 50 mm, where the teeth will be inserted and welded. If this is a corner, then the pins are welded directly to the metal.
• An auxiliary bar with pins is welded to the bottom of the legs at such a distance from the crossbar in the support frame that the main forks move freely.
• An emphasis is attached to the outer side of the crossbar of the support frame. The main load will be exerted on it with pressure on the handles. The stop is in the shape of the letter "T".
• A piece of pipe is selected less than the width of the auxiliary bar by 50 mm. The teeth of the main ripper are welded to it.
• Swivel joints are made from steel ears and a piece of pipe, on which the main "forks" will "walk".
• A handle is inserted into the pipe segment, to the upper part of which a pipe is welded, which acts as handles. For this purpose, you can use a straightened bicycle handlebar.

Miracle Shovel is a real invention and assistants for the gardener. Recently, gardeners and gardeners have often begun to use miracle shovel for digging the earth. Now, almost every household plot has such a tool. Moreover, some models of such tools have become quite popular among summer residents. Working with such a device significantly reduces physical activity. At the same time, with its help, the processing of a land plot is carried out almost 3 times faster.

Pros and cons of miracle shovels

Miracle shovel can be called universal garden tool. However, it has not only positive properties, but also negative ones. The device has many advantages:

• Thanks to such a shovel, a person works in the garden or in the garden with reduced physical activity;
• The wide scope of the pitchfork makes it possible to significantly speed up the process of processing a land plot of any size;
• It is easy and simple to work with the device;
• With the help of a miracle shovel, even heavy types of soil can be processed;
• High reliability and durability of the tool.

It is worth paying attention to the cons of the miracle of the shovel:

• For the maximum result of work with the help of this device, the weight of the worker must be at least 80 kilograms;
• If the shovel breaks, there may be problems with the repair;
• With this tool it is impossible to do curly digging;
• It is impossible to dig holes.

However, this garden tool can be used to cultivate any type of land. Miracle shovels can be used for loosening and digging the earth for the subsequent planting of vegetables. So, devices with pitchforks that can dig the soil to a depth of 15 to 25 centimeters can be used to prepare the soil for planting some vegetables:

• corn;
• and other cultures.

More tender plants (,) are planted not with seeds, but with seedlings. In this case, the holes should be dug with a regular garden shovel. It is worth noting that it is impossible to work a miracle with a shovel in the garden. With its help, you can’t dig trees, you can’t dig a hole, so work should be done with a classic shovel.

Important! This device can be effective if land plot has an area of ​​0.5 acres or more. At small sizes plot it is better to cultivate the soil with a bayonet shovel.

The main structural elements of the miracle shovel

The miracle shovel performs not only its direct functions - digging the earth, it also loosens and breaks clods of earth. The design consists of two strips with pins. They are movably connected to each other. Sometimes the device may consist of one such bar.

Some manufacturers produce models that have a back stop. Such a shovel is designed to facilitate work when digging dense heavy soil. So the miracle shovel is more like a double pitchfork.

If you look at the picture, you can understand that this tool is nothing like a shovel. It also has other differences from the usual bayonet shovel. So, the handle of the model is much higher and should be at shoulder level. Some models have a crossbar at the top, which makes it possible to work with two hands.

The main advantages of a miracle shovel include the fact that it is capable of performing several functions:

• Loosen the soil;
• Breaks large clods of earth;
• Pulls out the roots of any weeds without leaving them in the ground;
• Easily digs potatoes, beets and other root crops.

The principle of operation of this device is not complicated. If you describe it in general terms, it will look like this: ordinary forks mounted on the back stop loosen the earth through the force that a person transmits manually tool, pressing on the handle.

At this time, the second fork teeth, located opposite and included in the lock, break up large lumps of soil in the process of loosening. As a result, the earth is well dug up and loosened.

The ripper is equipped with a front stop, which provides good stability to the entire mechanism. Looking at the work of the miracle of a shovel, it can be compared with scissors that cut and crush earthen piles. At the same time, there is no need to cultivate the land with a garden rake.

Miracle shovel is an indispensable tool for gardeners and gardeners. It is especially good to use it when digging large areas, since with the help of this tool the work process can be accelerated several times.

With proper operation of this device, you can independently dig about 20 acres of land. And if you use several of these shovels, you can qualitatively process a whole hectare of land.

Watch the video! Miracle shovel, which one to choose

Varieties of universal rippers

Currently available for sale a large number of miracle of spades that represent various designs. Some types of products can change the depth of digging the soil, others are equipped with additional functions. In addition, along with a manufactured product, on the shelves you can also see devices made by yourself according to special drawings.

Among industrial devices, several of the most popular models can be distinguished.

• Classic miracle shovel. Often made by gardeners on their own. This device, consisting of the main forks and the back gauge, significantly reduces the load on the body. This increases the speed of work. The disadvantage of this design is that it does not break earthen clods, so you have to additionally use a rake. Also, the tool can only be used for digging black soil, which is processed regularly;
• Plowman. For better productivity, manufacturers are constantly trying to improve the design. So, many rippers were created, including the Plowman. A feature of this device is the length of the bayonet, which can reach 15 cm. Thus, the shovel provides loosening of any type of soil;
• Mole available with a fork length of about 25 centimeters. It was created specifically to be able to make a deeper dig. In this case, plants should be planted immediately after tillage. It is worth noting that it is not easy to dig the soil with such a unit. It is especially difficult to work hard-packed earth or alumina;
• There are universal miracle shovels. With their help, you can dig the soil up to 20 centimeters deep, but only if the soil is black soil, and it freezes only up to 10 cm. Under more severe conditions, this shovel is not suitable for cultivating garden crops. But for decorative digging, it is suitable.

Watch the video! Digging a plot for potatoes with a miracle shovel

Making a miracle shovel with your own hands

Sometimes gardeners or gardeners cannot find the right ripper model for certain reasons. In addition, production devices may not be affordable for everyone. Therefore, many undertake to make a miracle shovel on their own. Moreover, such a miracle shovel, made by hand according to the drawings and exact dimensions, it turns out no worse than the factory one.

Blueprints

To understand how to make a miracle shovel, you need to understand the drawings. After that, you should prepare the material for creating a garden fixture. Also, to assemble the product, you need to prepare special tools in advance:

• metal fittings and square pipe;
• welding machine;
• grinder.

It is important that the design meets all the specified parameters, the main of which will be the depth and width. These dimensions will depend on how deep the ground freezes in the region, as well as for what purpose this structure is being assembled. So, the device can be used for digging the soil or for loosening it. If the device is made only for loosening, then a depth of 10 centimeters is enough.

If a tool is created to loosen the earth in which it is necessary to immediately plant green spaces, then when assembling it, it must be taken into account that the depth of the pothole should be 5 centimeters deeper than the freezing of the earth. It is worth noting that in each region this mark will be different.

When choosing the width of the fork, you should take into account not only your wishes, but also physical strength. It is important that the width of the fork does not exceed 50 centimeters. If will work strong man who can dig up huge piles of earth, then you can make a miracle shovel according to individual parameters. To do this, you need to find on special sites the necessary drawings and videos on how to properly make a structure with your own hands.

Stages of making a miracle shovel with your own hands (drawings)

1. Before you start assembling the device, you need to prepare all the details. First, we take pre-prepared steel rods and cut them to length. From them we make bayonets, and then we sharpen their ends.
2. cut the carrier bar from a square pipe.
3. A metal pipe will be needed to make the base of the handle.
4. A thrust bar is also made from the pipe. It must be given an arcuate shape and attached to the carrier bar. All parts of the product are assembled by welding.

You can additionally mount a ripper to it, with which you can break up large clods of earth. The scheme for creating a ripper is the same as for the main pitchfork. Two devices are attached to the movable mechanism. In this case, the miracle shovel will be able to dig the soil in areas with a slope. In addition, it will be able to qualitatively crush even small lumps of soil.

At the end of creating an amazing device, you need to choose a suitable cutting. If the product turned out to be too bulky, then the handle can be replaced with two metal pipes, which are welded to the tool, they are connected from above by a transverse one, forming two handles, which will greatly facilitate the work with such a miracle shovel.

Watch the video! Do-it-yourself miracle shovel (drawings). Testing the miracle shovel in practice