Feeders for feeding squirrels and other birds. Feeder for squirrels - options and types of designs

In almost any park you can meet a squirrel, which is in constant search of food. Such guests may appear on suburban area near a private house. In order to help the animal, it is worth taking care of the device of a special feeder. Such assistance is especially important in winter, when food production becomes quite difficult.

What to feed squirrels

Before you start feeding the animal, you should familiarize yourself with its nutrition and the products that need to be given. Wrong diet and low-quality products can harm the health of the animal.

Important! It must be remembered that the squirrel is a herbivore. Therefore, in the diet without fail must be products plant origin- apples, pears, carrots.

It is also worth adding nuts to the squirrel diet, these can be walnuts or forest nuts. At the same time, it is important to control the quality of products. Spoiled food should not be given. This can not only harm the health of the person, but also lead to death, so you should be very careful with this. Among the products that can be given to proteins are:

lettuce, it is preferable to give red-headed, but you can also give green;
chicory salad;
spinach can be given only in small quantities, since it may contain nitrates;
a small amount of cabbage;
broccoli and cauliflower;
celery.

AT winter time food may be limited to nuts, apples, pears. Additionally, the animal can be pleased with various dried fruits - raisins, dried apricots. Such a delicacy will not only saturate the protein, but also give the required amount. useful vitamin and micronutrients.

How to properly feed

If a squirrel has settled in the garden and there is a desire to feed it, you should first consider the place where this will be done. The ideal solution would be a special feeder for squirrels. It can be made from various materials and installed anywhere. In some cases, it is advisable to place it on a branch, and in some cases, install it on a post near the place of residence of the animal.

In both cases, the feeder should be practical and the squirrel should move comfortably in it during meals. Its spring design depends on personal preferences and imagination. It is worth noting that an ordinary feeder can be an addition to the entire landscape design.

After the place is equipped, it is worth familiarizing yourself with the diet. It is advisable to feed the animal several times a day. In this case, the products should be served in small portions. At the same time, fruits and vegetables must be cut into small pieces and put in a squirrel feeder. If desired, a place for feeding can be made with your own hands. With a lack of time, such a feeder can be purchased at a specialty store.

Do-it-yourself feeder construction

For the manufacture of the feeder, it is recommended to use wood, it can be a processed board or slab. It is not recommended to use materials that have been dyed or treated with other substances. The smell of a foreign solution can scare the animal. A prerequisite for the device is the floor of the so-called "dining room". It is important that it be even.

Important! Particular attention should be paid to the roof for the feeder.

Such structural element will allow the animal to enjoy treats even during rain or snowfall, in addition, the products will not be so much exposed to negative influence environment. If the feeder is open on the sides, there is a chance that birds or other animals will also come to feast on treats. In this case, you can equip a more complex squirrel feeder.

Feeder with jar

An interesting solution is to make a feeder with a jar. This will require a small amount of materials that are in almost every home. You will also need the most common tools. Required inventory:

tape measure and pencil;
hand saw;
screwdriver

In this case, self-tapping screws of a suitable length are used as a connecting element. The basis of the feeder is best made from wood. Additionally, you will need a glass jar. It performs not only a decorative, but also the main function, it is in the jar that the squirrel is fed.

To begin with, it is worth taking measurements and preparing all the details. The jar should freely enter the neck into a wooden box, which is a kind of passage to the feeder. The first thing the work begins with is the implementation of the foundation. For this, one board may be enough, if its width is small, then two can be connected. This will allow the squirrels to move freely around their feeder.

At the second stage, you can proceed to the implementation of the box. In size, it must correspond to the size of the animal. The box may be square or rectangular shape, it doesn't really matter. From three sides you can make an entrance. It can be square or round. Through the holes, the squirrel should freely pass to its feeder. On the fourth side, you need to make an opening into which the neck of the can will enter. It should fit tightly and hold securely in the hole. This will ensure complete safety for the animal even while moving. Additionally, the jar can be fixed by placing special supporting elements on a wooden base. It can be simple bars that are fixed in a vertical position.

The glass jar is removed if there is a need to put new feed and put back in place. Other animals and birds will not get into such a feeder, so the squirrels will remain full. In addition, it will be useful for children to observe how animals eat, since the glass allows you to observe the whole process. During the execution of the work, it is worth monitoring the places of all joints and eliminating all sharp corners, knots and screws that have passed through, since the protein can injure itself during movement.

Conclusion

By taking care of a quality place for feeding a squirrel, you will make her life more comfortable. Thus, you can not only save the life of the animal, but also please yourself with interesting neighbors. It is important to follow all recommendations when arranging a feeder and carrying out feeding.

We make a good feeder for squirrels with our own hands.

Meeting with a squirrel always brings a lot of positive emotions. A do-it-yourself squirrel feeder will help attract these funny animals to your site.

feeder requirements

A feeder, as well as a house for fluffy beauties, must be made in accordance with some rules:

Do-it-yourself squirrel feeders are used exclusively natural wood, and not varnished chipboard or plastic fragments in general. Firstly, squirrels live in the forest and all sorts of paints, laminates and plastic attributes are extremely dangerous for a delicate organism. Secondly, the smell of varnish can scare away the squirrel and your work will be in vain.
You need to make a compact structure.
If the feeder is closed, then it needs a round hole.
In order for squirrels to visit the feeder, you need to hang it correctly - only on a tree, and at such a height that you can safely put food and snacks there.

Manufacturing technique

For squirrel feeders, you can use any natural boards, including slabs. The main requirement is that the material used must be absolutely dry. It is advisable to choose boards with a wall thickness of 2.5-3 cm. So the feeder will last longer, and the animal will be comfortable inside.

There are several basic options for creating a squirrel feeder (a photo of some of the options below).

From the boards

This method is the easiest and fastest. You will need boards with thickness / width / length dimensions of 1.8 / 30 / 300 cm, respectively. The total length should be three meters.

Manufacturing technique:

Using a cutting square, measure and cut a 55 cm board. This will be the back of the feeder. 5 cm are canceled from above and below. It is with them that the feeder will be attached to the tree.
Now the sidewalls are cut off - two boards 25 * 45 cm and an internal partition with dimensions of 20 * 25 cm.
The remaining two blocks will play the role of a porch.
Using a jigsaw, round holes are cut out on the front and back of the future feeder, through which the squirrel will get to the food. Wooden sections must be carefully sanded with sandpaper so that the squirrels do not get hurt.
Estimate whether you have done everything, whether all the details fit correctly. If there are no defects, you can glue the feeder.

To be sure of the strength of the squirrel feeder, the parts can additionally be fastened with self-tapping screws. It is highly undesirable to use nails in this matter so that the animals do not cut themselves.

From the bank

Oddly enough, but this method is not only interesting, but also simple, popular and looks very original. In addition, the food will be reliably protected from birds.

Choose a jar that is spacious enough, at least 15 cm in diameter, so that the squirrel can not only climb into it, but also sit and eat nuts.

Do-it-yourself squirrel feeder (drawings attached) is a house placed on a long ledge-base.

The approximate dimensions of the house are 45/25/20 cm (length / width / height, respectively):

With these tips, you can make your own squirrel feeder and spice up your garden.

Squirrels are not only beautiful, but also very useful animals. A small and inconspicuous inhabitant of the forest helps people in greening the planet, in the fight against dangerous pests, as well as in creating fertile and loose soil. A smart animal makes food reserves throughout the summer and autumn, without which it is impossible to survive during the winter cold. By spring, tasty supplies are coming to an end, and the fluffy animal may die of hunger. To maintain the squirrel population, biologists recommend hanging feeders with nutritious and healthy treats. There are a huge number of options this device. Even without special tools, you can make a beautiful and original feeder.

Requirements

A squirrel feeder is a small structure that will protect goodies from snow and rain, and can also become a shelter for an animal during a snowstorm and frost. In modern pet stores, you can buy a ready-made product, but in order to please not only animals, but also children, you can create a forest dining room yourself. Before starting the manufacture of the feeder, you must carefully study the requirements for this device.

Small size - height 60 cm, width 45 cm, depth 40 cm, hole diameter 8 cm.
Use only natural materials- wood, paper, cardboard. Experts do not recommend the use of fiberboard, chipboard, plastic, as well as materials painted with varnish or paint.
The presence of a round manhole for closed structures.
Connection of parts only with self-tapping screws. The use of nails can lead to deformation of the house, as well as injury to the animal on the sharp edges of the fixing parts.
No toxic or hazardous substances.
Reliability and strength.
Long period of operation.
Fixing the feeder on tree trunks at the level of human growth.

Kinds

Making a squirrel feeder is a creative event, during which you can show your imagination and building skills. Biologists identify several main types of devices that can become the basis of a future forest canteen.

So glass jar - a universal device that will reliably protect treats from various kinds precipitation. To make it, you need to have a set of standard tools and skills to work with them. The main condition is the use of banks big size, which will enable the animal not only to get food with its paws, but also to completely climb into the container. Classical appearance designs can be changed in accordance with the idea of the master.

two-storey- a unique design that will serve not only as a feeder, but also as a house in which you can create a family and spend the winter.

from a log- a simple design, which consists of a piece of hollow log 40 cm high with a hole for a manhole and a small roof.

open- a light and roomy product that will become a forest dining room not only for squirrels, but also for birds.

In the absence of the possibility of making a feeder from natural materials, experts recommend paying attention to other types of devices.

From a plastic bottle- a very simple product that even a child can make. Advantages - low cost, ease of manufacture. To make it, simply cut a hole in plastic bottle volume from 2 to 5 liters of the required size, and then fix the device on a tree.

From cardboard box - a simple product that can be made from a finished box of the required size from any household appliances. In a cardboard box, using a clerical knife, you need to cut holes of the required diameter, then simply tie the product to a branch with a rope.

Edible- a delicious treat that can be made from the most affordable products, and the appearance depends only on imagination.

All types of feeders should have a lid and a flat floor. The use of open structures will allow the birds to take food from the animals.

Biologists recommend giving preference wooden structures, which will serve more than one year. Paper and cardboard products are less aesthetically pleasing and can be damaged by wind, rain and snow. The manufactured structures should look natural and aesthetically pleasing, and also please not only humans, but also animals.

Preparation

Preparation of drawings and sketches is an important stage in the creation of this design. Builders recommend before making a feeder to make detailed drawing, which will contain exact dimensions and correct calculations. A design made without dimensions may not be suitable for operation. best material for the manufacture of the feeder is the wood of coniferous and oak trees, the second place is occupied by birch and aspen structures. Experts do not recommend using construction material poplar.

Creation order

To create a beautiful and practical do-it-yourself squirrel feeder biologists recommend doing the work correctly in the following sequence:

drawing up drawings;
selection of the necessary material;
production of parts according to the dimensions indicated in the diagram;
processing products with sandpaper;
connecting parts with self-tapping screws;
treatment of the structure with special antiseptic agents.

To avoid injury to the animal, it is imperative to sand all edges and remove all burrs. For antiseptic treatment, it is necessary to choose drugs that are safe for animals and cannot harm them.

Simple design

One of the most simple designs is an open feeder. Its manufacture will not cause difficulties even for beginners. Before creating this product, you must carefully study the drawing, which indicates all the necessary dimensions. The manufacturing process consists of the following steps:

fastening racks to the bottom part;
fixing the sides to the racks;
fixing crossbars on corner rails;
roof manufacturing.

Creating a simple and practical glass jar feeder is not difficult, but it will take time and a minimum number of tools. Experts recommend using a standard and accurate product drawing. Construction technology:

sawing two side walls and one front wall, as well as the roof and floor;
drawing a hole for the manhole, the size of which will correspond to the diameter of the neck of the jar;
cutting a circle;
making an entrance to the feeder;
connection of all parts.

original ideas

Among the huge number of simple structures, biologists positively evaluate and original ideas. One of the unique developments is a two-story feeder, which can serve as a house. To make it, you need to purchase a thin board about three meters long and 35 cm wide. From this material you need to cut one part for the back side measuring 30 by 50 cm and two side parts measuring 40 by 20 cm. The size of the inner part should be 20 by 25 cm. A simple and unusual feeder for a squirrel can be corn cobs fixed on pins that cannot be eaten birds. Advantages - ease of manufacture.

An indispensable tool for winter feeding will be an edible feeder, which can be made from an empty half of a pumpkin or coconut. In the resulting container, you can simply pour any goodies for the animal. To give original look any design can be decorated with small saw cuts of tree branches.

No less unusual feeder can be edible beads that even the smallest nature lovers can make. To make them, you need to string small bagels on a strong rope and fix them on a branch. Nimble animals will be very happy with such a gift. In park areas, you can find feeders in the form of a house, a hut, locomotives, cars, benches, swings, a small table with a chair, as well as in the form of various carvings. Even a construction helmet will definitely come in handy in this process.

The fixed rubber masks of animals with a treat inside will be able to please children, into which nimble animals will constantly dive for a treat.

Tie or nail to a tree?

To fix the created structure, you need to choose an old tree with a thick trunk. It is strictly forbidden to nail the product to the selected tree. Metal fixing objects can lead to the death of the plant. The safest option for fixing a forest canteen is a strong metal wire, with which you can securely fasten the structure to the trunk.

Biologists recommend hanging feeders on wooden poles, fences and other structures., to which you can nail the structure with any fastening tools. If the product is made of plastic, paper or cardboard, then you can use a regular thick rope. When choosing a place for feeding an animal, it is necessary to take into account the types of growing trees, the presence of frightening elements, as well as the windiness of the site.

What to put in the feeder?

Drafting proper diet for an animal in the winter - a guarantee of activating its vitality and strengthening immunity during the winter cold. The fluffy animal loves to eat the seeds of all coniferous plants, young twigs, bark, buds, tree leaves, needles, nuts, acorns, mushrooms, various berries and fruits, tubers, rhizomes and lichens. For daily feeding of a fluffy animal, you can use the following products:

wheat bakery products;
hazel;
underground peanut;
pine nuts;
sunflower and melon seeds;
edible fruits of trees and shrubs;
berries;
dried fruits and berries;
dry mushrooms;
hemp;
lettuce leaves;
dairy products;
whole milk;
separated and congealed cream;
grass;
branches;
bumps.

We make a good feeder for squirrels with our own hands.

Meeting with a squirrel always brings a lot of positive emotions. A do-it-yourself squirrel feeder will help attract these funny animals to your site.

feeder requirements

A feeder, as well as a house for fluffy beauties, must be made in accordance with some rules:

For do-it-yourself squirrel feeders, only natural wood is used, and not varnished chipboard or plastic fragments in general. Firstly, squirrels live in the forest and all sorts of paints, laminates and plastic attributes are extremely dangerous for a delicate organism. Secondly, the smell of varnish can scare away the squirrel and your work will be in vain.
You need to make a compact structure.
If the feeder is closed, then it needs a round hole.
In order for squirrels to visit the feeder, you need to hang it correctly - only on a tree, and at such a height that you can safely put food and snacks there.

Manufacturing technique

There are several basic options for creating a squirrel feeder (a photo of some of the options below).

From the boards

This method is the easiest and fastest. You will need boards with thickness / width / length dimensions of 1.8 / 30 / 300 cm, respectively. The total length should be three meters.

Manufacturing technique:

Using a cutting square, measure and cut a 55 cm board. This will be the back of the feeder. 5 cm are canceled from above and below. It is with them that the feeder will be attached to the tree.
Now the sidewalls are cut off - two boards 25 * 45 cm and an internal partition with dimensions of 20 * 25 cm.
The remaining two blocks will play the role of a porch.
Using a jigsaw, round holes are cut out on the front and back of the future feeder, through which the squirrel will get to the food. Wooden sections must be carefully sanded with sandpaper so that the squirrels do not get hurt.
Estimate whether you have done everything, whether all the details fit correctly. If there are no defects, you can glue the feeder.

To be sure of the strength of the squirrel feeder, the parts can additionally be fastened with self-tapping screws. It is highly undesirable to use nails in this matter so that the animals do not cut themselves.

From the bank

Oddly enough, but this method is not only interesting, but also simple, popular and looks very original. In addition, the food will be reliably protected from birds.

Choose a jar that is spacious enough, at least 15 cm in diameter, so that the squirrel can not only climb into it, but also sit and eat nuts.

Do-it-yourself squirrel feeder (drawings attached) is a house placed on a long ledge-base.

The approximate dimensions of the house are 45/25/20 cm (length / width / height, respectively):

With these tips, you can make your own squirrel feeder and spice up your garden.

Meeting with a squirrel always brings a lot of positive emotions. A do-it-yourself squirrel feeder will help attract these funny animals to your site.

feeder requirements

A feeder, as well as a house for fluffy beauties, must be made in accordance with some rules:

For do-it-yourself squirrel feeders, only natural wood is used, and not varnished chipboard or plastic fragments in general. Firstly, squirrels live in the forest and all sorts of paints, laminates and plastic attributes are extremely dangerous for a delicate organism. Secondly, the smell of varnish can scare away the squirrel and your work will be in vain.
You need to make a compact structure.
If the feeder is closed, then it needs a round hole.
In order for squirrels to visit the feeder, you need to hang it correctly - only on a tree, and at such a height that you can safely put food and snacks there.

Manufacturing technique

There are several basic options for creating squirrels (a photo of some of the options below).

From the boards

This method is the easiest and fastest. You will need boards with thickness / width / length dimensions of 1.8 / 30 / 300 cm, respectively. The total length should be three meters.

Manufacturing technique:

Using a cutting square, measure and cut a 55 cm board. This will be the back of the feeder. 5 cm are canceled from above and below. It is with them that the feeder will be attached to the tree.
Now the sidewalls are cut off - two boards 25 * 45 cm and an internal partition with dimensions of 20 * 25 cm.
The remaining two blocks will play the role of a porch.
Using a jigsaw, round holes are cut out on the front and back of the future feeder, through which the squirrel will get to the food. Wooden sections must be carefully sanded with sandpaper so that the squirrels do not get hurt.
Estimate whether you have done everything, whether all the details fit correctly. If there are no defects, you can glue the feeder.

To be sure of the strength of the squirrel feeder, the parts can additionally be fastened with self-tapping screws. It is highly undesirable to use nails in this matter so that the animals do not cut themselves.

From the bank

Oddly enough, but this method is not only interesting, but also simple, popular and looks very original. In addition, the food will be reliably protected from birds.

Choose a jar that is spacious enough, at least 15 cm in diameter, so that the squirrel can not only climb into it, but also sit and eat nuts.

Do-it-yourself squirrel feeder (drawings attached) is a house placed on a long ledge-base.
The approximate dimensions of the house are 45/25/20 cm (length/width/height respectively).