We make slime with our own hands at home. How to make a slime at home from different ingredients

Cool toy for children - "Lizun" or "Slime". Did you know it's easier than ever.

In this article, we will analyze the easiest ways to make homemade handgam or slime yourself, and now slime. But first we will tell (maybe someone does not know yet) what kind of miracle this is.

What is slime or slime?

Immediately Video:

Surely you have seen or even purchased such an unusual jelly “bad” for your child. It can still stretch and stretch, take any shape and not stick to your hands.

In the common people, this toy is called a “lizun”, but in fact (where it came from - from the States) its name is in English “handgum” (handgum). It is not difficult to guess - "hand" (hand), and "gum" (chewing gum).

And today you can often hear - how to make Slime at home with your own hands? What is slime and what is it for? From English "Slime" is a children's toy made of jelly-like material, pleasant to the touch, able to stretch and assemble back to its original state.

Again, the same slime in a simple way! Slimers can make such a sticky jelly out of any material with their own hands and improvised means (although for some you still have to go to a store or pharmacy).

And now let's start making a slime at home - we will make a slime like in a store or even better.

How to make slime (slime) at home without sodium tetraborate

There are several simple ways or recipes for making boron-free slime (sodium tetraborate) at home. It's safe for your kids!

The easiest way - from water and starch without glue at all

All we need is starch and water. Mix both ingredients together in equal proportions or 2 parts water and 3 parts starch. And we get our homemade slime. For a firmer consistency, you need to add more starch. And in order for it to become bright - a dye.

You need to understand that such a toy will not be quite the one that we often see. But still, the kids will be happy. And use only warm water.

Slime made from starch and PVA glue

In this case, we need PVA glue and the freshest one is better. Separately, mix water and starch, then add dye (you can use sparkles with essential oils). Mix thoroughly without lumps. Lastly, pour in the glue. For convenience, use a bag instead of a container.

Ingredients: PVA glue - 50 mg., Water - 100 mg., Starch (you can soda) - 1 tablespoon, dye ("brilliant green", gouache, food coloring).

The same can be done with baking soda used in the kitchen. That is, instead of starch with water, mix soda.

From shampoo and glue "Titan"

This time we take high-quality, not expired glue "Titan". You can find it at any hardware store.

Take a bag and pour two parts of shampoo (absolutely any) and three parts of glue into it. It is worth shaking a little until completely mixed and thickened, and the slime is ready. To make the toy look more beautiful, pour a little dye and glitter into the shampoo before glue.

How to make a slime (slime) at home - a store option

To make a slime at home, as in a store, we need an additional (main) ingredient - sodium tetraborate (both a liquid solution and a dry powder are suitable).

Main elements:

PVA glue - 100 grams,
1 vial of sodium tetraborate (4%) or if the dry version - mix 1 tablespoon of the powder with half a glass of water,
dye for color option.

- Instead of tetraborate, you can use Borax powder, which is available for free purchase in pharmacies.

Manufacturing:

take a suitable container and pour glue into it (the more glue, the larger the toy),
carefully add the dye (do not overdo it, otherwise the slime will get dirty), mix until smooth,
slowly pour in the boron solution (so that the slime does not stick to your hands and is not liquid, you can add borax more than it should be), mix thoroughly and we get a jelly mass,
then, to remove excess moisture, it is worth blotting with a napkin (and for the future, when the child plays, it is best to put the handgum on paper - this way less lint and debris stick to it)
and the last - put the resulting clot in a bag and crumple for 3-5 minutes, and now it's time to play with it.

When making, do not use cold liquid (water or shampoo),
Try not to put it on products with pile (including cats and dogs),
Homemade slime, although safe, is not recommended to eat and put in your mouth,
To make it smell delicious, mix it with essential oils,
The sparkles inside the slime look very nice,
Choose a new adhesive base, and not lying somewhere on a shelf,
Store in a closed container and in a cool place
But even if the homemade slime is a little dry, place it in warm water.

And another DIY slime recipe - It's just a bomb!

Shaving foam slime - aqua

Pour 125 mg glue into a separate container. A prerequisite is that it must be thick and of good quality.
Add some emerald acrylic paint. Stir and get a thick dark mass.
It's time to lighten it - add shaving foam, a lot of foam. Gently mix the foam with the colored mass. Reminds me of ice cream or sweet cream.
Pour some water and 15 grams of boric acid into the jar, and a couple of drops of hand soap.
Stir with a wooden stick and the thickener is ready. Pour the mixture into the colored foam and stir again.
It turns out a real slime with your own hands.

Well, now, while we were typesetting this article, someone tested and made a slime at home with maximum performance.

A real bomb - how to make a magnetic slime (lizun) at home - video

The best and correct slime made by hand

Pour, again, as in the previous one, thick transparent glue - 125 milligrams.
Add hot pink acrylic paint. Stir until a uniform color.
Add a little bit of contact lens fluid and mix. In total, we poured about 10 grams.
Pour half a teaspoon or a large pinch of soda. As you knead, the mass begins to thicken and stretch. Great, she's completely behind the walls.
Next, knead with your hands until it stops sticking to your palms.
It turned out a cool soft and elastic slime. It does not stick, does not tear and stretches perfectly. It's great to play with him and you don't even want to let go of it. Reminds me of a huge pink chewing gum.

Probably one of the best recipes we've tried. Stretches into a thin film. You can blow bubbles out of it - that's how elastic it is.

Video how to make a cool slime (slime) without glue and thickener

Making slime with shampoo and toothpaste

You can use any shampoo, but two in one is best - well, like shampoo plus rinse.

You will need:

shampoo - 30 ml. (4 tablespoons),
toothpaste - 1 teaspoon,
dye - 5 drops, if you want to make the slime colored.

Pour the shampoo into a bowl and add toothpaste.
Stir until the mass becomes more dense.
If the slime turns out to be liquid - add a little toothpaste, if it is too thick - shampoo.
As soon as you realize that the slime turned out - put it in the freezer for an hour.
After the time has elapsed, take it out and knead it with your hands - play with it.

For any slime, get a box with a lid - so it will last longer.

Soap and sugar slime without glue

For a sweet but inedible slime, you need:

liquid soap - 5 tablespoons,
granulated sugar - 3 tablespoons,
dye or glitter - if you want to make an original slime.

Mix all products in one container. First place the soap, and then gradually pour in the sugar, while stirring constantly.
Close with a lid or bag and refrigerate until the next day.
Then check the slime for performance. And add more soap or sugar if needed.

You will immediately understand when the slime is real - with your hands to the touch.

Fluffy, airy slime - Fluffy slime without glue without film mask without tetraborate without shaving foam

How to make slime with soap and salt

There are simple and easy option salty slime, but again inedible.

You need the following:

liquid soap - 3 table. l.,
fine salt - 3 table. l.

Pour the soap into a separate bowl and sprinkle in the salt evenly, stirring constantly. 5 minutes is probably enough.
Remove for half an hour in the refrigerator, but not in the freezer.
The slime will be moderately thick and moderately liquid - something average.

True, he does not live long - as soon as he notices, he begins to lose his property - put it back in the refrigerator for the same time.

A simple recipe: homemade glue stick slime - video

That's it, stop looking, girls and boys, it's time to start manufacturing, so that everything turns out Cool and with a bang!

Probably, almost everyone has heard about this toy "lizuna". Children are happy to run Velcro on the wall or on the floor, and adults like to crush this plastic mass in their hands, while relieving stress accumulated during the day. Let's take a closer look at how to make a slime different ways. We would like to note that for the manufacture of toys, in most cases, you can easily find all the necessary components at home.

How to make slime without sodium tetraborate

Perhaps the easiest way to make a toy without the use of boric acid. The absence of sodium tetraborate in the slime is due to the presence of starch in the recipe.

Ingredients:

PVA (approximately 150 grams);
Starch (in the presence of liquid starch, water is not needed for cooking);
Dye (you can take gouache);
Plastic bag (for forming toys).

Cooking steps :

Pour starch into an enameled container and add water in small portions. Thoroughly mix the resulting mass. The consistency should be viscous, the presence of lumps is unacceptable.
Add 2-3 drops of dye, mix thoroughly and put the dishes in the refrigerator for 20 minutes.
Place the cooled mixture in a small plastic bag hic and add 150 grams of glue.
Mix everything vigorously and drain off excess liquid. Slime is ready.

How to make slime out of water

The most common of the recipes present. The resulting product will not differ in any way from the toy bought in the store.

What do we need :

100 grams of PVA glue.
4% solution of storm acid (sodium tetraborate).
Food coloring.

Manufacturing process :

In pre-prepared enameled dishes, pour one fourth of a glass of heated water and add glue.
Place sodium tetraborate in a container and mix thoroughly.
The resulting composition is poured into a plastic bag. Ready!

After use, be sure to wash your hands thoroughly with hot water.

How to make slime from shampoo

Despite its simplicity, this method does not guarantee a 100% result. But the small number of ingredients and the quick manufacture of the product make us pay attention to the shampoo slime recipe.

Ingredients :

Shampoo (in the absence of dye, the color of the shampoo will determine the color of the finished product)
Glue "Titan" (this brand of glue, after drying, demonstrates elasticity and does not contain toxic solvents in its composition).
Plastic bag.

Pour Titan glue and shampoo into a plastic bag in a ratio of 3: 2 (maintenance of these proportions is required!) And gently mix until a homogeneous mass is obtained. We are waiting five minutes. The toy is ready!

How to make a slime without PVA glue

A large number of the right ingredients and a record long production time, will justify themselves at the end of cooking with an excellent result.

Required following components :

sodium tetraborate.
PVA (polyvinyl alcohol).
Bandage.
Water.
Food coloring.
Dishes (bowl, plastic glass, plastic spatula).

Manufacturing steps :

Dilute polyvinyl alcohol in water in the proportions indicated in the instructions for PVA.
The resulting solution is placed in a bowl and boiled over low heat for 35 minutes.
2 tablespoons of sodium tetraborate powder, diluted in a plastic cup with warm water. We pass the thoroughly mixed mass through gauze, while getting rid of excess liquid.
The polyvinyl solution is mixed with sodium tetraborate in a ratio of 3:1, and the contents are brought to a thick and homogeneous state.
Dye is added to the resulting slime.

If your "favorite" begins to dry out, you should put it in a bowl of warm water for a short time.

How to make slime from plasticine

Enough interesting method making toys from edible gelatin and plasticine. The finished product holds its shape well and is non-toxic.

For the manufacture of crafts we need:

Children's plasticine.
Gelatin.
Utensils for cooking.

Manufacturing process :

In a metal bowl cold water, add gelatin in the ratios indicated in the instructions, and defend the resulting mass for an hour.
After 60 minutes, put a metal vessel on a small fire and bring the contents to a boil.
In parallel, we warm up the plasticine with our hands and place it in a plastic bowl with warm water (about 50 gr.). Using a plastic spatula, mix the ingredients until a homogeneous mass is obtained.
Pour gelatin into a vessel with plastic, stir and put the resulting mass in the refrigerator for 45 minutes. Slime is ready.

How to make a slime out of water and paint

If we compare this method with other recipes, we can say that it is one of the simplest. The main thing is to choose the right proportions of the right ingredients, and a good result will not keep you waiting.

So, the necessary components :

Glue (any one that you have available is suitable: stationery or PVA).
Bura.
Paint (you can take the usual brilliant green or any food coloring).

Manufacturing process :

In a plastic cup half filled with warm water, add 3 teaspoons of borax.
After obtaining a homogeneous substance, add glue and paint to the glass.
Mix thoroughly and use the resulting toy.

As for colors, you can experiment with them indefinitely, and create a huge army of wonderful toys.

How to make slime at home: recipe

The toy appeared on sale in the mid-90s, after the release of the famous TV series Ghostbusters. Lizun fell in love with children, which became the reason for the popularity of the toy of the same name. A reasonable question arose - is it possible to make a toy at home? And it's not even about saving money. Joint production of a favorite hero, great way spending time together with parents.

What do you need to keep your child engaged in an interesting and exciting activity?

100 grams of "fresh" PVA glue.
One and a half glasses of water.
Borax.
Zelenka (here it acts as a dye).
Disposable tableware.

All is ready? Forward!

In a glass filled with water, dilute 3 teaspoons of sodium borate.
In another glass half filled with water, pour the same volume of glue. That's where the green comes in.
We combine the solutions into one whole and mix. That's all. Process completed. Keep the slime in a closed container.

By using essential oils you can give your favorite entertainment interesting smells.

How to make a soda slime

There are two recipes for making your favorite baking soda toy. In one case, in addition to water and soda, they use washing powder or dishwashing liquid, in another - PVA glue. Consider the last option, which is safer for children.

Components :

Baking soda.
PVA glue.
Water.

Manufacturing steps :

100 grams of PVA glue should be mixed with water in a ratio of 1: 1. Add dye.
In a separate glass, prepare a solution of soda. For every 50 grams of water, there is 1 tablespoon of soda.
Slowly stirring the adhesive consistency, add a solution of soda to it.

It is worth noting that the entertainment obtained with this recipe will be quite hard and weighty. When playing with a slime made of soda, you can break glass objects located in the room. Therefore, you should be careful.

How to make a soap slime

Surprised by the large number of instructions for preparing a toy? Here's another soap slime. The simplest method, which requires only two ingredients:

Shampoo.
Soap (of course we are talking about liquid soap, the color of which should be as close as possible to the color of the shampoo).

Cooking :

Mix the two components in a ratio of 1 to 1.
Close the container with the resulting mixture with a lid and place in the refrigerator for a day.

We would like to draw your attention to the fact that a toy made in this way requires special care. Protecting it from debris and dust, and storing it in the refrigerator, the product can last about a month.

In this video, we'll look at how to make a slime toy out of soap:

How to make paper slime

Of course, having looked at the previous recipes, and having tried some in practice, you want to try others. expendable materials for making slime. As can be seen, glue, starch or sodium tetraborate were used to prepare a homogeneous and viscous substance. The properties of paper, alas, are not slippery, malleable or sticky and are not intended for making toys. The only thing you can achieve is to make an origami slime.

How to make slime from flour

This method is suitable for the little ones. And if only natural substances are used as a pigment, the new entertainment will be absolutely safe for the health of your child.

What do we need to make?

Warm water (temperature should fluctuate between +30 ... +40 ° C).
Flour.
Cold water.
Natural food coloring.

Cooking steps :

Pour 400 - 450 grams of ordinary flour into a bowl.
Add one fourth of a glass of cold water.
Add a quarter cup of warm water there and make a batch.
After obtaining a homogeneous mass, add 2-3 drops of dye to the dough and put the bowl in a cool place for 3 hours.
received sticky mass can be played even by the youngest children.

Despite the fact that the resulting mass is not toxic and does not have toxic properties, you should not take the resulting toy into your mouth.

Now you know how to make a slime in all sorts of ways. We can say to strict parents - this is not simple toy for pampering. Pleasant to the touch soft substance will contribute to the development of motor skills of your child's fingers, help to remove irritation and create a positive emotional background.

Slime video

In this video tutorial, Sergey from the Galileo channel will tell you how to make a Lizun toy for your own use without much effort:

Which of the children, and even adults, will deny themselves a funny game with a slime? Make it with my own hands It will take a little time, and even fewer materials will be needed. There are several ways to make such an interesting toy from scrap materials.

Half a teaspoon of boron.
A small bottle of colorless glue.
Any harmless dye.
Water.

To prepare the mass, from which the slime will eventually turn out, you need to take any two deep bowls. Be sure to need two containers, because a two-part solution is being prepared. Pour a glass of water into one bowl (take warm water) and add boron. The resulting mass should be well mixed to obtain a homogeneous consistency.

In the second bowl, you need to mix 100 milliliters of water, 30 grams of discolored glue. To give color, use a dye, it must be added at this stage. Once again, mix everything well.

Then you should mix the two components. To do this, carefully pour the contents of the first bowl into the second. In the process of connecting the two parts, the slime will gradually begin to acquire the correct consistency, and the whole mass will be stretchy.

The process of preparing the slime is over, you can start exciting games, most importantly, make sure that the children do not try it with their mouths. You need to store such a slime in a well-closing container.

Making slimes from glue and starch

Making slime from glue and starch with your own hands

Another option that is even simpler than the previous one.

Liquid starch.
PVA glue.
Plastic bag.
Dye.

Lizun - This is a toy for children, so all materials should be as natural as possible. If there is no food coloring, you can replace it with gouache paints. Be careful, if the child is allergic to any dyes, you can make the slime colorless. Particular attention should be paid to the production time of the glue, it must be fresh, the slime will not work out of the old glue.

You need to take a tight plastic bag and pour about 70 milliliters of liquid starch into it. Often such starch is used during washing, this is how it differs from food starch. If this is not the case, then you can take the usual one, only it should be diluted: one part of water to two parts of starch.

Following the starch, send a few drops of natural dye into the bag, the main thing is not to overdo it, otherwise, during the games, the slime will stain not only the hands, but also the surface.
Next, you need to add about 25 grams of PVA glue (be sure to mix the bottle with glue well beforehand).

Now it is good to close or tie the bag and mix thoroughly until the contents look like a thick mass.

You may not be able to achieve the right consistency right away. Don't despair right away, because the alteration will only take a few minutes. The main thing is to find a middle ground and mix all the ingredients in the right proportions.

Store also in a closed container to protect from dust. The service life of such a slime is about a week.

Lizun from soda

Such a toy can be given to children only in the presence of adults. This is due to the fact that it contains detergent. It is necessary to make sure that after the games the child thoroughly washed his hands.

Detergent.
Baking soda.
Water.
Natural dye.

Pour a small amount into the prepared dish. detergent, add water and dye. With these ingredients, you can also adjust the density of the resulting mass simply by adding water or detergent.

In the resulting mass, add soda and mix well. The resulting mixture should have sufficient density. If too much soda is added, you can dilute it with water to the desired consistency.

The color of the resulting slime can be adjusted by adding dyes. That's all, the soda slime is ready for play. Make sure that the child does not taste such a toy.

Another easy way to make slime.

Your favorite shampoo
Shower gel or dish detergent.

In prepared dishes, mix equal amounts of shampoo and shower gel or dish detergent. All ingredients should be of a homogeneous consistency and not contain any additional substances, such as scrub particles, which are often added to shower gels. The color of the slime you get will depend on the materials used.

All components must be mixed well and put them in the same container in which they were mixed in the refrigerator. The resulting mass should be there for at least a day, only after this time the slime will harden to the correct consistency, and it will be possible to play with it. It must be stored only in the refrigerator so that it does not melt and does not lose its shape, in a closed container.

Make sure that the slime stays clean, if there is a lot of dust on it, then it should be thrown away and a new one should be prepared. This toy will last about one month.

Making such slimes at home is not difficult. The only nuance that needs to be taken into account is that for its manufacture you need to take a non-flowing washing powder, but a gel-like one. Unfortunately, it is impossible to replace it with liquid soap or shower gel, because these products contain other components.

Gel laundry detergent.
Office glue.
Natural dye.
Medical or other thin rubber gloves.
Storage container.

It is necessary to pour about one-fourth cup of clerical glue into the prepared container. Glue can be more or less, it depends only on your preferences in the size of the slime. The more glue, the bigger slime you get.

Add a natural dye of the desired color to the glue and mix the components well so that the glue acquires a uniform color.

In the resulting mass, you need to add 40 grams of gel-like powder. Again, mix well the resulting mass. Over time, this mass will become sticky and will have the consistency of putty. Make sure that the mass does not get too thick. If this happens, then a few drops of powder should be added.

Next, you need to put on gloves, get the resulting mass from the container and start kneading. The process is approximately the same as if you were kneading dough. During kneading, the slime will come out excess fluid, if available, and the mass will become soft and elastic.

Store the resulting slime in a tightly closed container. If you notice that it has begun to melt or has become too soft, then you can send it to the refrigerator.

Slime from flour

This cooking option is most suitable for young children. If you use dyes from natural substances, then it becomes completely harmless and not dangerous to the health of the baby. The only disadvantage of these dyes is that they are not so bright, but harmless.

Regular flour.
Hot water.
Cold water.
Natural dye.

It is necessary to take a small bowl and pour 400 grams of flour into it. You can sift it through a sieve, so the future mass will be more homogeneous and easier to knead.

Then we add a quarter cup of warm water to it, it should be just warm, you can not pour boiling water.

When the mass is well mixed, you can add a few drops of natural dye to it and mix well again. As a result, the mass should turn out sticky.

We send to a cold place for 4 hours. When the whole mass has cooled down and acquired desired shape you can let the kids play.

A very interesting slime can turn out if you make it magnetic, it also has the property of glowing in the dark. There is no need to buy such a slime in the store, you can easily make it yourself.

Already familiar boron.
Water.
Office glue.
iron oxide.
neodymium magnet.

Mix everything very carefully until the boron is completely dissolved in water. It's cooked in one pot.

In the second bowl, you need to mix 10 milliliters of water and 30 grams of stationery glue. As before, everything is mixed very well and a coloring matter is added to the resulting mass. If you add paint at this stage, which contains phosphorus, you get a slime that glows in the dark.

Carefully mix the two components of the future slime into a homogeneous mass. The main thing is not to rush and mix everything well, then the mass will turn out to be the desired density.

The resulting mass must be decomposed into flat surface, and add iron oxide to its middle.

Lizun, which will be magnetized, is ready. Now it can be moved with a magnet on a flat surface.

Sometimes such situations happen that it seems that all the ingredients are correct and they did not deviate from the instructions, but the slime still did not work out. It's all about the parts you used to make it. Each material is significantly different, different manufacturers, using the same components, can produce a product at the output that is not similar to its counterpart. Therefore, you should not strictly adhere to the described proportions, depending on your materials, their amount may differ. Don't give up right away, just experiment.

A slime that meets all standards should be removed in a homogeneous mass without much effort from the dishes where you store it.

If your toy is very sticky, this can be seen from the threads that will follow the spoon. When you touch it with your fingers, it is too sticky and does not lag behind well, you need to dilute it slightly. This can be done with water or starch.

When your slime stretches, but practically does not stick, it means that, on the contrary, there is too much liquid. To give density, you need to add a little glue or the main ingredient that was used for cooking.

Do not be afraid to experiment, only by trial and error you will be able to choose the right consistency, and your children will enjoy a new, and most importantly, toy that is absolutely not harmful to the health of the baby.
Watch the video: "LIZUN" at Home
See more crafts in the section. See you on the pages of our site.

All children - from preschoolers to teenagers - adore slimes. Let's be honest, a lot of adults love them too. This semi-liquid sticky mass is simply pleasant to roll in your hands, it can be kneaded endlessly. In this article, you will learn how to make a slime at home, as well as find a video tutorial on how to make it.

Manufacturing methods

In many homemade toy preparations, water is the main ingredient. However, you can make a funny mass without it - for example, from shampoo and toothpaste, starch and even condensed milk! We will talk about the most popular methods, and you can choose the one that suits you.

Slimes from the water

quick slime

This instruction with a video will tell you how to make a slime at home in almost extreme conditions, when there is no time, and the child needs to be occupied with something.

You will need:

260 ml of water;
sodium tetraborate (sodium salt of boric acid);
2 bowls;
120 ml of glue;
food coloring.

How to do:

Stir 140 ml of water and sodium tetraborate in a bowl until the latter dissolves.
In another bowl, mix the glue and 120 ml of water to a watery texture. Add food coloring to the mixture.
Stir the contents of the bowls, then let the mixture sit for a minute.

Done, play!

Soap flake slime

A very simple homemade recipe.

You will need:

How to cook:

Mix soap flakes and hot water. To do this, first place the cereal in a bowl, and then carefully pour hot water over it. Mix thoroughly until the flakes are completely dissolved.
Add a few drops of your chosen food coloring.
Leave the mixture for an hour.
Whisk the mixture vigorously with a spoon. She will start foaming. Stop when the mass becomes viscous, sticky and slippery.
Place the slime in a container with a lid.

glowing slime

You can make a slime out of water and paint. It's not just colorful - it glows!

You will need:

2 bottles of white glue (you can take glitter glue - to taste);
large bowl;
small bowl;
3-4 tablespoons of glow-in-the-dark paint
neon food coloring;
1 teaspoon sodium tetraborate;
half a cup of warm water.

How to do:

Pour the glue into the bowl. Fill empty bottles warm water close the lids and shake the bottles. Pour this water into a bowl and mix well.
Add food coloring.
Add glowing paint.
In a small bowl, mix half a cup of warm water with sodium tetraborate.
Stir the contents of both bowls and leave for 2 hours.

Slime is ready!

Flour and water

You will need:

Bowl;
flour;
a mug of cold water;
food coloring;
container with lid.

How to do:

Mix flour and a quarter cup of water in a bowl. Stir until a homogeneous liquid mass is formed.
Add food coloring. If the mixture is too dry, add more water. After that, you may have to add a little more dye, as the water will dilute the paint.
Leave for an hour, then place the slime in a container.

Water, salt and shampoo

Making a slime out of shampoo and water is easy. Everything you need is already in your kitchen and bathroom.

You will need:

thick shampoo;
salt;
Bowl;
a spoon;
freezer;
shower gel.

How to do:

Squeeze two tablespoons of shampoo into a bowl.
Add the same amount of shower gel and mix until smooth.
Add salt little by little and stir until the substance thickens.
Place the mixture in the freezer for 15 minutes.

You can play!

Shampoo and toothpaste recipes

Simple slime

You will need:

thick shampoo, preferably clear or white;
toothpaste;
toothpick;
a small plate or saucer;
plastic closable container;
freezer.

How to do:

Pour some shampoo into a saucer. It will take about 2 tablespoons (about 30 milliliters).
Add a teaspoon of toothpaste.
Stir shampoo and paste, bringing to a homogeneous sticky substance. This will take about a minute.
If the mixture is too hard, add a few more shampoos, and in case of excess moisture, add pastes. Mix for another minute.
Place the mixture in the freezer for 10 minutes. Then check its status. It should be hard, but not like ice. If the slime is too soft and thin, leave it in the freezer for another 50 minutes.
Remove the substance from the freezer. Remember, squeeze and roll it in your hands until it becomes soft again.

Now the toy is ready. After playing, place it in a plastic container and close tightly.

big slime

You will need:

small saucer;
shampoo 2-in-1;
toothpaste, preferably transparent;
toothpick;
plastic container with lid.

How to do:

Pour about two tablespoons of thick shampoo into a saucer.
Add a tablespoon of toothpaste. If you want the slime to be thinner, add less paste.
Stir the mass with a toothpick or a small spoon for a minute until the mixture becomes homogeneous. Mix in different directions.

The toy is ready. It is more sticky than the previous one.

salt slime

You will need:

small saucer;
thick shampoo;
toothpaste;
salt;
toothpick;
freezer;
small plastic container with a lid.

How to do:

Pour about two tablespoons of shampoo into a saucer.
Add about half a tablespoon of toothpaste.
Stir until color and texture are uniform.
Add a pinch of salt and continue to stir until all ingredients are combined into a smooth paste.

The toy is ready. Such a slime is usually more magnificent than others.

other methods

"Live" slime

You will need:

large bowl;
container with lid;
fridge;
90 grams of cornstarch;
240 ml of vegetable oil;
Styrofoam.

How to do:

Ready! Now, if done correctly, the slime will "follow" the styrofoam when you move the styrofoam.

edible slime

You will need:

1 can of condensed milk;
pot;
1 tablespoon of corn starch;
10-15 drops of food coloring.

How to do:

Pour the condensed milk into a saucepan. Place the saucepan on the stove. Add corn starch and stir until ingredients are smooth.
Heat the mixture over low heat. Reduce the temperature to a minimum and continue stirring constantly. If not stirred continuously, the mixture may stick to the pan.
When the mass thickens, remove the pan from the stove.
Add food coloring.
Let the slime cool completely.

Edible toy is ready.

Remember, the main condition for storing homemade slime is a plastic container with a lid. Make sure that the children's pet is not exposed to heat and sunlight. Keep in mind that the slime will dry out anyway after a while. It can be thrown away as soon as you notice that it starts to harden.

Lizun is one of the favorite children's toys. It has the consistency of soft chewing gum, but does not stick to hands.

Due to the fact that a variety of ingredients can be included in such a mixture, you will spend only a few minutes to "grow" a slime at home on your own. This is done very simply, and even the children themselves will be happy to participate in the work.

Let's find out some of the easiest ways and life hacks on how to make a slime at home.

Glue Slime Recipes

The most common option is the use of glue. Thanks to this component, the slime does not break and retains its shape. What kind of glue can you make a slime with?
Here are the three most popular options:

you can see how to make a slime with clear PVA glue or white glue;
in the work you can use a glue stick;
super-strong glue-moment is also suitable, but it should be handled with extreme care.

The first simple way that we will talk about is a slime made from sodium tetraborate, PVA glue and water.

You will need one hundred grams of fresh glue, a 4% sodium solution, and a coloring ingredient like gouache or brilliant green.

Pour ¼ cup into a special bowl for cooking plain water. It is better to hold it in advance room conditions to get a warm temperature.

Next, pour in the glue until a thick consistency is formed. After the glue, tetraborate (the whole vial) and the coloring component are added. All that remains after adding the ingredients is to wrap the mixture in cellophane and mash. Slime is ready!

Now let's find out how to make Velcro from stationery and silicate glue. This method is not so popular, but it allows you to get an equally high-quality toy.

In addition to glue, use alcohol and a coloring ingredient.

Mix alcohol and glue in equal parts (you can take vodka, but then it should be one and a half times more).

Color the mixture in the desired color, stir, remove from the container - and wash under cold water. After hardening with a slime, you can play.

Do you know how to make a licker out of glue and shampoo? If you decide to use this recipe, choose Titanium glue, as it will allow the slime to retain its strength for a long time.

Add shampoo to the bag - and immediately fill it with glue (it should be one and a half times more). Tie up the bag and shake. This will give you an even mixture that will thicken in just a few minutes.

A detailed video on how to make slime from titanium glue:

Many are interested in how to make a transparent slime without sodium tetraborate. This component at home can be replaced with soda. And if you add dyes, our slime will be colored.

What we need: half a glass of soda, one hundred ml of glue, half as much water, dyes, a couple of containers and a wooden stick for kneading.

Let's make it from PVA glue and soda:

make the glue more liquid with water (for example, by mixing 100 and 15 ml);
color the mixture (food coloring will not stain your hands);
stir your workpiece until the paint dissolves;
Mix water and baking soda separately. Pour the finished porridge to the rest of the ingredients;
mix the mass thoroughly, wrap in a film or cellophane - and shake;
if you want the slime to thicken more, keep shaking or stirring. You can try adding more baking soda and glue.

Remember! It is better to store such a slime in a closed container, as it has a short service life, and without proper conditions it will deteriorate even faster.

Don't have PVA glue on hand? Not scary! There is another very simple way to make a lick stick from a glue stick. Watch the video recipe - we can do without PVA glue:

Of course, glue is far from the only component that allows you to get the right consistency for a slime toy. Below you will find many more interesting ways and videos on how to make a slime without sodium tetraborate and PVA glue with your own hands.

On shampoo and gel

Let's talk about a few popular ideas on how to make a lick from shampoo at home.

The first way - the recipe consists of shampoo, water and soda. Mix the components in equal proportions, add paint or brilliant green, traditionally wrap this mixture - and knead in cellophane.

After that, it will be possible to try the slime for quality.

A similar method involves the use of not soda, but salt. Watch the video on how to make a toy from shampoo, water and salt:

As you understand, in such recipes an important role is played by a component that allows the shampoo to thicken a little.

What to use for such an effect depends only on your imagination. For example, it is easy to guess that you can mix shampoo with flour.

What is needed for such a toy: fifteen gr. shampoo, one hundred gr. flour of any kind, as well as one hundred gr. slightly warm water. We start by mixing the dye and shampoo in a warm liquid.

Later, add the sifted flour - and knead the doughy mass. The desired consistency will be obtained fairly quickly.

Attention! Slime made from shampoo and flour is greasy and can leave stubborn marks on light-colored materials.

Instead of flour, you can use starch. How to make slime from starch and shampoo - see the following video:

Since shampoo and others household products for personal care have a similar consistency, you can easily replace it with something else or even mix several different preparations at once.

Here is one way to make a real slime from shower gel and shampoo: these ingredients will be kneaded in equal proportions.

Advice: do not use a gel with small granular particles that has a scrub effect.

Knead the future anti-stress toy from these products and put it in the cold for about an hour. After that, you can use the mass for its intended purpose. But keep in mind that with increasing temperature, its viscosity will decrease.

After playing, the slime should be sent to the refrigerator.

How to make a slime out of washing gel? To make it last longer, use glue. Mix these ingredients, color the mass if necessary and mix thoroughly. That's all.

It remains only to hold it in the refrigerator for a while.

By the way, it’s easy to make a slime from foam or shaving gel with your own hands. Here is one of those ways:

How to make toothpaste

One of the easiest ways involves using toothpaste.

Take a not very liquid paste (white is better not to take) and pour into a container. Add glue in the same amount there. Knead this mass, adding glue if necessary.

Stir as long as possible: this will affect the density and viscosity. After kneading, the slime will be ready.

Below you can watch a video recipe on how to make a slime from toothpaste with your own hands:

Soap and detergent recipes

Let's start with a description of an anti-stress toy made from detergent and soda. Most often, soda is taken for him, as well as water and Fairy. For getting desired color use gouache.

In a pre-prepared container, add dishwashing detergent - and begin to thicken it, gradually adding soda.

If you find that the slime is too thick, add water to get the opposite effect. When adding ingredients, do not stop stirring the mass.

The licker will be ready even at room temperature, you do not need to send it to the cold.

And here's how to make it from liquid soap and salt:

For an even thicker consistency, toothpaste can also be used as the main ingredient. See for yourself how you can make a cool licker out of soap, paste and water:

On washing powder

Powder is an ingredient that can be found in every apartment. The peculiarity of this recipe is that not any kind of powder is suitable for us.

It is better to use liquid products: dry powder will have to be pre-kneaded with water until the desired consistency is obtained.

It’s easy to figure out how to make a lick yourself out of Persil, Tide and any other laundry powder: in addition, we will use glue and dye.

Remember! This procedure must be carried out with gloves so that the powder does not damage the delicate skin of the hands.

Where to begin? Choose a mixing bowl and add a quarter cup of glue to it. Immediately drop a little coloring ingredient and mix it with PVA.

After that, add two large spoons of liquid powder and begin to knead the product until it is sticky and thick. To slightly reduce the density, add more powder.

Now, with gloves, start kneading the finished mass like dough. Remove the formed liquid. You will get a slime that looks like rubber. It must be stored in a closed container in the cold.

Flour method

When we make a toy at home, together with children, it is very important to think about safety. A simple and safe option is a recipe with flour.

Attention! To color such a slime, you should choose only high-quality natural ingredients.

Before you make a craft from flour and water, prepare everything you need: about 0.4 kg of flour, as well as separately cold and warm water. Pour the flour into a container, after sifting. Add to it 0.25 cups of low temperature water.

Immediately add the same amount of warm liquid. Let's start mixing.

We add a little dye: a couple of droplets is enough.

Our slime will become sticky, so put it in the cold for four hours before playing. After that, the mass will be viscous, dense enough and pleasant to the touch.

plasticine slime

A fairly simple instruction on how to make a slime yourself from plasticine, gelatin and water will help you quickly prepare a new one. interesting toy for your child.

Take about one hundred and twenty grams of plasticine, one small package of gelatin and half a glass of water. First, make the gelatine into jelly according to package directions. When the jelly is still warm, pour the hot liquid into another container.

At the same time, boil water, reduce the gas - and start dipping crushed plasticine there. Stir the water during the process.

After the plasticine fragments have melted, add gelatin. Stir the prepared anti-stress mass again. After a couple of days, you can play with it.

Attention! Plasticine slime paints hands, so be careful.

If desired, a fluorescent-type paint can be added to the mixture at the mixing stage. Then the slime will be bright in the dark.

Another way is on the video: from it you will learn how to make a slime from plasticine:

Other recipes

There are many more ways to create such bright toys: you can learn how to make a liquid slime from water and paint, hand cream, eye drops, glycerin, dough, lipstick.

From some ingredients, you can get edible slimes: for example, from watermelons, nutella, mashmellow, chewing gum. And here are some more ideas on how to make slimes at home.

Video on how to make an edible slime at home:

How to make a nail polish slime: Mix fresh glue with a few drops of nail polish. After mixing, add a few drops of tetraborate from a pipette.

Stir again. After the mixture begins to acquire a thick consistency, put it out of the container on the polyethylene. Roll up and start kneading from side to side by hand.

In the future, if you lose shape, you can leave the slime in the refrigerator.

And here's how easy it is to make slime from boric acid:

There is a way in which you can easily and simply make your own glass slime without color. It will be obtained from one hundred grams of polyvinyl alcohol and twenty-five grams of 4% tetraborate.

Add borax to the alcohol and start stirring quickly until the mass thickens completely. You don’t have to add additional ingredients: the transparent toy will be ready.

By the way, the slime prepared according to this recipe is non-toxic and is much more suitable for children than similar purchased toys of an incomprehensible composition.

How to care

How to care for a slime at home so that it lasts for a long time? Periodically you can wipe them with alcohol. Do not dip them in water or wash them under a tap.

To maintain the desired consistency, you can use a syringe to add alcohol, water and other components inside.

Children really like this toy, and there is nothing surprising in it: pleasant to the touch, bright slimes coolly creep along the wall, separate and gather.

Such a toy not only charges with positive, but also develops dexterity, motor skills and other skills. And it even relieves nervous tension, so you can join the kids and play together!

Watch a video on how to make an anti-stress slime yourself - three more ways: