How does a toilet with a built-in bidet work? Toilet with bidet function: how to get maximum comfort at your disposal without extra costs

The shower toilet is a modern sanitary ware designed for maximum user comfort and hygiene. The installation of a toilet-bidet is carried out according to various schemes, depending on the type of device, and the method of connecting plumbing is universal. How to install and connect a toilet with a bidet function with your own hands, read on.

Installation of toilet bowls of various types

A toilet with a bidet function, depending on the type of installation, can be:

outdoor. Standard design of a sanitary ware, fixed on the floor of the toilet room;

hanging. Suspended plumbing allows you to hide all required for normal functioning communications in the wall. For installation, an additional device is required - installation.

Any bidet toilet can be operated manually, by installing a faucet or automatic system. To install an electronic toilet, you will need an electrical power supply.

Installation of a floor toilet-bidet

A floor-standing toilet with a bidet function is installed according to the following scheme:

preparing a place for the installation of plumbing. The surface of the floor is cleaned of various contaminants. This stage is especially important to perform when replacing plumbing;
on the floor, markings are made for the attachment points of the plumbing device. When marking, it is necessary to take into account the location of the sewer pipe and the chosen method of connecting the toilet to the sewer;

holes are drilled in the marked area. If the floor is tiled, it is recommended to use a drill bit for drilling;

the toilet is fixed to the floor. Dowels are inserted into the prepared holes to help fix the device. Silicone sealant can be used to seal the joint;

corrugated plumbing product is connected to the sewer inlet;

is installed.

Cistern must be installed on a special gasket, which allows to achieve maximum tightness of the connection of individual devices into a single system.

Installation of a suspended shower toilet

Hanging shower toilets with installation are installed in the following way:

at the first stage, the assembly and installation of the installation. The installation of the device is carried out in such a way that it is possible to hide all communications connected to the plumbing: a sewer entrance, water pipes behind a false wall. In this case, it is recommended to observe the parallelism of all guide elements;

studs built into the installation directly fix the plumbing device. A gasket is installed between the toilet bowl and the mounting device, which protects the toilet bowl from damage;

at the last stage, the toilet bowl and drain tank.

How to properly install the installation and fix it on it wall hung toilet, look at the video.

Connecting toilets

To connect the shower toilet to the water supply, you will need:

flexible hoses. The selection of hoses must be carried out according to a variety of parameters, the most significant of which are: the length of the hose, the pressure withstand and the purpose of the device;

wrench (adjustable) wrench. In order not to damage the coating on the eyeliner nut, the edges of the keys can be wrapped with a layer of insulating tape;
FUM tape or other means for sealing threaded connections.

It is recommended to connect the plumbing device through a separate valve that allows you to autonomously shut off the toilet water supply. To increase the period of use of the toilet bowl after the faucet by water pipe a separate filter must be installed.

If the bidet toilet device involves manual control, then an additional built-in faucet is required.

Connection diagram through a mixer:

water hoses are connected to water supply pipes;
a mixer is installed;
hoses are brought to the mixing device;
from the mixer, a flexible pipe supplies water to the plumbing device;
connections are checked for tightness.

More advanced plumbing models are complemented by a thermostat that mixes water to a predetermined temperature. In this situation, the installation of a mixer is not required. Flexible hoses are connected to pipes and a thermostat, from which warm water flows into the bidet.

If you connect an electronically controlled bidet toilet, you will need:

connect the power cable to the device. Since the shower toilet consumes a large number of electricity, it is recommended to bring a separate branch;
provide good grounding. For grounding, you can use both a separate cable and built-in devices, such as special sockets;
install an RCD (device for monitoring the leakage of electricity). The device can be installed separately or built into the plug.

Electronic toilets with a bidet function, as a rule, are equipped with thermostats that automatically heat the water to a predetermined temperature. Therefore, it is required to make a connection only to a pipe with cold water. Mixer installation is not required.

Each plumbing fixture comes with detailed diagram its connection to various communications and recommendations from the manufacturer of the shower toilet. If you know the basic rules for installation and connection, as well as strictly adhere to the attached scheme, then you can do all the work without the help of specialists.

In most apartments, the bathroom has a combined plan and has small area. Even if the toilet is separate, it is so small that it is simply impossible to install a bidet there.

With a strong desire to acquire a hygienic unit, in the absence of free space, there is an alternative option for a combined toilet with a bidet function.

What does a bidet toilet look like?

Externally, the unit is exactly the same as a standard toilet, except that the bowl is slightly elongated and the drain barrels are larger. The difference lies in the equipment. The toilet bowl - bidet has a built-in system that allows you to carry out hygiene procedures. The water supply is carried out by nozzles located on the rim of the toilet bowl or on the spout under the rim.

The product performs two functions: it works like a regular toilet and, when the lever is pressed, it turns into a bidet. Warm water flows from the nozzles under pressure, you can comfortably wash intimate places.

Note. Certain models have a fitting, when turned on, it moves forward, when turned off, it rises to the same level with the rim.

Basic and additional functions of the built-in bidet

There are models with backlight, air aromatization, built-in player, motion sensors, etc.

How to use a bidet toilet

There is nothing difficult in the operation of the toilet bowl - bidet. After fulfilling natural needs, turn on the bidet and perform hygiene actions using soap or special agent for intimate hygiene. Remove moisture with a hair dryer or towel. The main thing is that all the necessary tools are at hand.

Models of toilet bowls with a bidet function

Manufacturers offer several toilet bowls two in one.

Mounting type

Standard floor standing toilet. Easy installation. Difficult to clean up. Impressive dimensions.
Hanging item. Mounted on the wall. Maximum load up to 400 kg. Pros: small dimensions, easy cleaning, aesthetic appearance. Cons: difficult installation and repair.

Fluid heating and nozzle control

Production material

Porcelain. Reliable, hygienic.
Faience. Strength is average. Coating with pores, gets dirty quickly.
Steel, pvc, glass, stone, cast iron. Products from these materials are extremely rare.

Additional model differences

Classic shape or corner
Type of sewer outlet
Flush option (circular or direct)
One or more tanks.

Price

The cost of a product directly depends on its functions and material of manufacture.
Mechanical toilets - bidets cost from 6,000 rubles.
Wall-mounted mechanical product with a microlift. The starting price is 22,000 rubles.
Electronic toilets - a bidet with a wall-mounted installation and a remote control can cost from 120,000 rubles.
A hanging toilet with a built-in bidet function, equipped with a complete set of add-ons, will cost at least 400,000 rubles.

Important! When purchasing a toilet, carefully check it for mechanical damage. Be sure to ask for a warranty card. It is reasonable to buy products of this category in specialized stores.

The main disadvantages of products

Complicated installation and repair
The high cost of units with advanced features.

Mounting Features

It doesn’t matter which toilet you want to install on the floor or wall, the installation will be without features, just like connecting to the sewer system. The difference is related to the water supply for the bidet.
Mounting is directly related to how the liquid is heated.
In standard mechanical products, there is only a cold water supply. A flexible hose is connected to a tap on a pipe. Inconvenient but cheap.

If a mixer is present for mixing water, the connection is made with cold water and hot water. Adjusting the level of liquid heating is standard, as on any mixer using a lever or valves.

The electric water heater and thermostat in the bidet toilet must be connected to cold water and electricity.
Such products require separate wiring, automatic protection and grounding.
The combined toilet with bidet function is a very convenient product that allows you to use the bidet without installing it separately.
Sometimes a hygienic shower comes to replace a toilet bowl - a bidet, which is also installed for the most part in rooms with a small area or a cover - a bidet is purchased.

Unfortunately, not everyone has the opportunity to purchase and install a separate bidet. After all, the dimensions of our bathrooms do not allow this. However, there is a modern alternative - a toilet with a bidet function.

Such a device is suitable for those cases where it is impossible to install all the necessary items in the room at the same time. it functional solution which is not known to everyone. Although there are a sufficient number of admirers of such convenient devices for the home. After all, the products look very elegant, but are inexpensive.

Shower toilet

Such an innovation is not much different in appearance from the usual. True, the tank will be a little larger, since it is additionally equipped with an electronic control system. By pressing a button, we turn a standard toilet bowl into an up-to-date bidet. Sometimes the device is equipped with a water heater. Therefore, the connection can only be made with cold water.

In the bowl of such a toilet there is a shower mechanism. The execution of this device may be different, in the form of:

leaving fitting with a nozzle,
bidetki located in the side.

This solution makes it possible to keep delicate areas of the body in perfect cleanliness without the need for toilet paper.

Such toilets can be:

floor,
suspended.

The first option is considered classic. Many manufacturers produce one model in two versions at once. However, the suspended option has a lot of advantages. For example, the tank that is in the wall is not visible, and washing the floor around such a device is a pleasure.

Features of suspended models

If many are familiar with standard models of toilet bowls, then hanging ones are only reaching the level of popularity. Therefore, not everyone knows. Such products can be called built-in, since all pipes with a tank and a drain system are placed in the wall. This part is called the installation. It is made from durable material. The user can see only the button, which is located in the wall. This approach can be defined as comfortable and even hygienic.

A characteristic of modern models of toilet bowls is the double flush system. One button drains the full volume of water in the tank, the second - only a part. The longer you hold the button on, the more water will be dispensed. Therefore, the system is focused on savings.

Some models have a sensor drain system. That is, instead of a button, there is a sensor in the design. To operate, the presence of a person next to the device is enough: the sensors detect the appearance of a person, when he leaves, they react - the water drains.

Installation

Installation is carried out in the same way as a conventional toilet. This will require a tool:

impact drill, and preferably a hammer drill;
FUM tape;
Set of keys, adjustable wrench;
silicone sealant.

First you need to bring communications: sewerage and water supply. If the model implies the presence of a mixer at the edge of the structure, then it will have to be installed. To do this, hoses are screwed into the mixer, you should not be zealous, so as not to damage the gaskets.

Next, we insert the mixer itself into the allotted hole, fix it. The second ends of the hoses should be screwed onto the water supply pipes. Make sure that there are gaskets in the connections. It is important that separate taps are installed for the bidet, allowing, if necessary, to shut off the water supply to the device.

By installing a toilet with a bidet function at home, you can save usable space in the sanitary room, make the process of personal care more convenient and reduce the time that is usually spent on personal hygiene procedures. Products of this design are presented in the widest range, which is worth understanding. Is not it?

We will tell you how to choose the most successful, functional and outwardly attractive option for yourself. In the article presented by us, all the landmarks that will help determine the best model. Popular products, leading in the market, and their manufacturers are given.

A sanitary hybrid in one design combines the functions of a classic toilet and a traditional bidet. Outwardly, the module resembles the most ordinary compacts and differs from them only in a slightly elongated bowl and a larger drain tank, in which an additional container is hidden that supplies water to the bidet.

Some plumbing manufacturers produce models without a flush rim. This greatly facilitates the care of the product and prevents the reproduction of harmful microorganisms in it. Vertical flush allows you to completely clean the bowl in one go without splashing water on the floor or nearby objects

On the rim of the bowl or under the rim on the fitting there are special nozzles (bidets), through which water is supplied from a hidden reservoir for hygiene procedures. When you want to use this function, you just need to press one button.

From the nozzles under the side of the toilet bowl or from the retractable nozzle with a spray at the free end, the warm water necessary for washing will begin to flow. Upon completion of the procedure, the fitting will return to its original place and will be installed strictly flush with the toilet rim.

Module options

Having the same basic purpose, toilets with a bidet function differ from each other in the type of attachment. Plumbing manufacturers offer customers floor, wall and corner models with wide functionality and attractive design. appearance.

Variety of shapes and design solutions allows the consumer to choose a product for himself, thus creating the maximum level of individual comfort in the bathroom.

Floor types of plumbing

The floor-mounted toilet equipped with a bidet option is a classic module that is most widely represented on the plumbing market. Outwardly, it looks like a traditional compact and, with the help of durable fasteners, is mounted in the bathroom on the floor, regardless of what kind of finishing decorative coating is laid in the room.

A toilet with a bidet function can be installed in a sanitary room with your own hands and attached to the floor using special parts that usually come with plumbing

Products of this type have tanks of different sizes and configurations. The unit is controlled in mechanical, semi-automatic and automatic modes. The most "fancy" models are equipped with an additional regulatory unit, on which you can set the parameters you want for comfortable operation.

Features of hanging products

The wall-mounted bidet module is a modern, practical and convenient multifunctional unit. It occupies a minimum of space, makes it possible to rationally use the space of the bathroom.

In addition, this type of device makes individual hygiene procedures more comfortable and allows you to effortlessly carry out scheduled cleaning of sanitary facilities.

The wall-hung toilet with bidet option is ideal for installation in a small bathroom. One of the important advantages of this design is the simplicity, convenience and accessibility of cleaning directly under the drain bowl.

All communication connections do not remain in sight, but are hidden behind a false wall. Entering the bathroom, the user sees only the plumbing fixture itself and a neat drain button. The installation process of the device is a bit more complicated than the installation of a conventional compact, and necessarily requires the use of an installation system.

This design allows you to "drown" the tank and other unaesthetic connecting elements into the wall. In order for the structure to hold securely and not vibrate during use, the supporting frame must have a margin of safety and be able to withstand weights up to 400 kg.

When choosing hanging options, you should give preference to lighter products. Heavy models with lots of decorative elements will put too much load on the wall and during long-term intensive use this can lead to problems

There are no restrictions regarding flooring equipment either. You can organize heated floors in the sanitary room or lay out the surface with decorative mosaics. A toilet with a bidet function hanging on the wall will not interfere with this in any way and will make it possible to translate into reality the most unexpected and original interior ideas of the owners.

Corner appliances to save space

Sanitary units with a complex layout or small bathrooms are appropriate to equip with a corner toilet with a bidet function. Many companies operating in this area produce such.

In the assortment presented for sale, there are both floor and hanging options with. Such plumbing allows you to make the most efficient use of the usable area and gives originality to a compact room.

It is most rational to place the corner device as close as possible to the sewer drain. If the unit is removed for a long distance, the connecting corrugated hose will often become clogged and will require regular laborious cleaning.

Corner modules are mounted to the floor just as easily as classic compacts. Some difficulty is the moment of connection to the drain communications, but this issue is completely solved. It is enough to connect the toilet outlet with sewer pipe and the system will work perfectly.

To install a hinged product, an installation is required, and not an ordinary one, but a special, angular one. Its frame part is attached to the walls and floor with dowels or anchor bolts. The drain tank, as a rule, already attached to the structure, has a minimum thickness (no more than 8 cm) and does not interfere with the convenient location of the drain bowl under it.

Material is an important parameter when choosing

One of the most important selection parameters is the material of the product.

Leading manufacturers in the segment use for the production of their sanitary ware:

faience;
porcelain;
decorative rock;
plastic.

Each type of material has its pros and cons, which determine the choice of buyers.

Faience is used most often. It has a porous structure, a dense, opaque shade and absorbs moisture. The strength of the material is not too high, so manufacturers make faience products with thicker walls, otherwise the service life of such plumbing will be very limited.

Due to the fact that faience contains up to 47% of kaolin clay, the price of products is kept within reasonable limits and does not frighten consumers with a large number of zeros.

Faience toilets with bidet function are heavy. This should be taken into account when purchasing and installing, especially if the device is planned to be installed in old premises where the service life of the floors has already expired or is approaching this

The proportion of kaolin clay in the composition of porcelain does not exceed 20%, so porcelain products look more aesthetically pleasing and demonstrate good strength, durability and impact resistance. Due to the high density of the surface, they do not absorb water and retain a radiant appearance for a long time.

Dirt and unpleasant odors literally “fly away” from porcelain, so caring for such plumbing modules requires minimal effort.

Porcelain sanitary ware is somewhat more expensive than its faience competitors, but these costs are justified. Its service life is almost 2 times higher and it is much easier to care for it.

Models made of natural stone look attractive and are distinguished by unsurpassed hygiene. But such products at a price seriously surpass even expensive porcelain appliances. In addition, they weigh a lot and are very afraid of mechanical damage.

Aggregates from artificial stone more practical and not so afraid of blows and damage, and their cost is not so high. The purchase of this "exotic" is determined by the interior needs and the personal desire of the owners. From a practical point of view, this option is not very appropriate.

Classification by drain system

When choosing a suitable toilet with a bidet option, it is imperative to take into account such a parameter as the device of the drainage system. All subsequent installation will depend on this.

If the outlet of the device does not match the sewer inlet, the communication wiring will have to be completely redone, and this is not only an additional financial cost, but also a large-scale "dirty" work.

Drainage in toilets equipped with a bidet option is horizontal, vertical and oblique. The horizontal version is considered classic and makes it possible to connect the bowl to the sewer riser without using corner elements.

The branch pipe for connection to the outlet to the sewer is located in the back of the module and is easily connected to the central communications using a corrugated hose.

To prevent the horizontal outlet from becoming clogged and causing bad smell, you need to very clearly set the plumbing on the floor and take into account the necessary slope of the drain pipe

Vertical release is more typical for houses built in the middle of the last century and for typical modern cottages. Such a system is equipped in order to save space.

The sewer pipe is directly connected to the socket at the bottom of the sanitary module and goes to the floor. Connecting communication nodes are not visible to the eye and do not spoil the interior of the room with their presence.

A vertical drain is convenient and practical, but requires the installation of a toilet bowl in a strictly defined place directly above the outlet of the sewer hole. The use of an elongated corrugation in this case is structurally impossible

In oblique outlet models, the outlet bowl is designed at an angle of 30°-45° to the floor. Thanks to this feature, it will be much easier to mount pipes located at different heights from the surface. But the modification also has a minus, namely, a potentially possible water hammer when lowering the water.

Attaching products with an oblique outlet to sewer systems must be done very clearly and reliably. Otherwise, during operation, leaks will inevitably appear and a persistent unpleasant odor will be constantly present in the room.

In addition to the above options, there are also universal models. They do not have their own pipe, and the outlet channel is hidden inside the toilet. However, they are not widely distributed yet.

Bowl shape and design

According to the shape of the bowl, the models are divided into funnel-shaped, visor and dish-shaped. In the first, the drain hole is located directly in the center and provokes the formation of splashes. Disc-shaped ones prevent the spread of splashes and drops, but have a lower level of hygiene, since the feces are trapped in the remnants of the flowing water.

In the visor versions, the spray does not scatter to the sides, and a slightly offset drain hole makes it possible to make a high-quality, smooth descent, leaving no traces on the surface.

In addition to the basic parameters, you should pay attention to unique characteristics, such as the shape and shade of the product. The times when only white plumbing was freely available have long since sunk into oblivion.

Today, drop-shaped, rectangular, round, square and cylindrical modules are available for purchase, made in any of the most exotic colors. If desired, you can find devices with original paintings, ornaments or patterns.

When purchasing models with a pattern or spraying, you should not save. The painting, made with high-quality dyes, will hold well and please the eye for a long time. But the cheap coating will quickly peel off and the plumbing will take on a sloppy, unkempt look.

Unusually designed models will add zest to the stylistic design of the bathroom and make it one and only. Of course, much more money will have to be spent on such devices. But what can you not do for the sake of arranging comfort, additional amenities and a pleasant atmosphere in an apartment or house?!

A set of additional features

Manufacturers producing modern plumbing modules equip them with various advanced features and fixtures.

Toilet and bidet hybrids can have features such as:

a water electric heater that provides the used water with a suitable and comfortable temperature for the user;
a thermostat that limits the supply of too cold or too hot water to the nozzles;
multi-stage pressure regulator, which makes it possible to adjust the level and strength of the jet individually for each user;
the pendulum movement of the nozzles, which makes the procedure of ablution better and more enjoyable;
a device that regulates the length of the nozzle exit;
hydromassage function with a set of different modes (vibration, pulsation, waves, etc.);
quick drying of the skin, which allows you to refuse the use of paper and napkins after the hygienic shower procedure;
the ability to switch drying to an air jet for air massage;
microlift, which contributes to the smooth automatic lowering of the toilet lid;
option to activate ventilation after using the toilet;
a protective coating with silver ions, which effectively repels dirt from the surface and prevents pathogenic microflora from multiplying;
automatic flushing in full immediately after closing the lid;
an additional buffer tank that supplies a disinfectant liquid before draining the water, thoroughly disinfecting the nozzles and the bowl itself;
programmable refreshment of the room by automatic spraying of air fragrance;
infrared sensor that reacts to the presence of a person, etc.

The more functions the plumbing unit is “stuffed”, the higher its cost and level of comfort of use.

Rating of models and manufacturers

The sanitary equipment market offers a huge number of hybrid units. Among the segment leaders, the Turkish company Vitra stands out, manufacturing toilets with a bidet function in different price categories.

The most popular among consumers is the floor faience product of the brand from the Grand line. The model is included in the category of budget, has a standard set of necessary functions, a classic universal design and a reasonable price.

The Crand toilet bowl with a bidet option from the Turkish manufacturer Vitra fits well into the bathroom interior and does not take up much space. Mechanical drain allows you to completely clean the oval bowl in one go without leaving any marks

If you want to buy something more refined and unusual, you should pay attention to VitrA Serenada. This version is made of porcelain and designed in a retro style.

The floor bowl is made in the shape of a rectangle and is equipped with a universal outlet. The fittings have a chrome-plated finish that protects the elements from corrosion. The functionality contains an anti-splash system, and the seat is complemented by a comfortable microlift.

Vitra Serenada is an expensive but very sophisticated hybrid model. Straight lines emphasize the simplicity of the form and give it an elegant look. High-quality porcelain, from which the module is made, does not absorb water and even over time does not become stained, does not turn yellow and does not acquire a specific smell

Interesting hybrids are produced by the famous Belgian company Ideal Standard. From its products, buyers choose models of the Ecco / Eurovit line, which differ modern design, compactness, high quality and quite affordable price.

Products from the Ecco/Eurovit series are made of sanitary porcelain. The functionality includes an anti-splash system, but the seat is not included with the module. It needs to be purchased separately

A truly luxurious sanitary ware is supplied to the market by the famous Swiss concern Geberit International, which has been producing sanitary ware for over 100 years. The range of toilet bowls equipped with a bidet option stands out with two highlights: Aquaclean 8000 and Geberit Aquaclean 8000 plus.

The modules are "stuffed" with all sorts of bells and whistles and meet the requirements of the most demanding customers. True, the cost of plumbing "miracles" is also quite high, however, customers are willing to pay for increased comfort and European quality.

The progressive products of the Aquaclean range are equipped with water heating functions with the ability to individually adjust the temperature, an infrared sensor that signals the approach of the user and a hygienic shower pendulum swing device

The described models are included in the list of the most popular and bought, but the choice is not limited to them.

Plumbing stores provide a wide range of certified products from different manufacturers and satisfy the demand of buyers with any needs both in cost and in the level of comfort.

Conclusions and useful video on the topic

General descriptions of toilet bowls with a bidet function. Detailed overview principles of operation, water supply and elementary rules of use.

All the most interesting details related to toilet + bidet hybrids are information from the official distributor. Pros and cons of products from famous brands and practical advice choosing the most suitable model.

Comparison various kinds toilets with a bidet option, the nuances of models made by popular manufacturers.

Buying a toilet equipped with a bidet option is a practical purchase that significantly increases the comfort of daily personal hygiene procedures. The module fits easily even in a small bathroom and harmoniously fits into the interior solution of any complexity.

You can choose a model of a suitable design and color, with the right number of options, in a plumbing store. The seller will provide all the necessary information about the product and show certificates confirming the purpose of the product and certifying its high quality.

Want to talk about how you bought plumbing with a bidet function for your own bathroom? Do you have any reference points in your arsenal that influence your choice, or technological subtleties facilitating installation? Please write comments in the block below, share useful information and photos on the topic of the article, ask questions.

The small area of \u200b\u200bthe toilet rooms in standard apartments does not allow placing a bidet next to the toilet. In this regard, the bulk refuses this item of plumbing. But there is an alternative option - a two-in-one shower toilet. Combined models are common in Japan, Turkey, South Korea. Gradually, they are gaining worldwide popularity, increasingly meeting not only in hotels, but also in homes.

In appearance, the toilet, combined with a bidet, resembles a traditional toilet with a more elongated bowl and an enlarged tank. Its main feature is the presence of a system that allows washing the intimate parts of the body. To do this, the device is equipped with special nozzles that can be placed directly on the rim of the bowl or on the fitting (spout) located under the rim.

The device can be used in toilet mode, simply by draining the water from the tank, or activate the bidet function by pressing a special button (lever). In this case, warm water will be supplied from the nozzles under pressure to complete. If the “2 in 1” bidet toilet is equipped with a fitting, then when it is on, it moves forward, and when it is off, it drives back, becoming flush with the rim.

In the photo, a toilet bowl with a control panel combined with a bidet

Shower toilet functions

The characteristics of a device such as a toilet with a bidet differ from manufacturer to manufacturer. Functions and additional components that this piece of plumbing may have:

electric water heater;
thermostat - prevents liquid with too low or high temperature from entering the nozzles;
multi-stage water pressure regulator - allows you to customize the operation of the device depending on the preferences of each family member;
pendulum movement of nozzles to improve ablution;
adjusting the length of the outlet of the fitting;
hydromassage - water can be supplied in the mode of pulsation, vibration, waves;
a hair dryer for drying the skin after a hygienic shower - this option makes it possible to refuse the use of paper, in addition, an air jet can be used for air massage;
microlift - necessary for smooth automatic closing of the toilet lid;
turning on ventilation in case of using a toilet bowl;
coating with silver ions, which repels dirt and prevents the growth of pathogenic flora;
automatic flush after closing the lid;
a reservoir for a disinfectant solution that is supplied before draining the water and disinfects the nozzles and bowl.

In addition, there are devices with automatic air fresheners, infrared sensors human presence, music players and so on.

Using a toilet with a bidet

The modern two-in-one bidet toilet is very easy to use . It is enough to sit on the toilet in a comfortable position and activate the flow warm water using the faucet, button, lever or remote control. In this case, you can use soap or an intimate hygiene product. At the end, turn on the drying option or apply a towel. It is important that all necessary items are within reach of the toilet.

Note: Instead of a full-fledged special toilet, you can purchase a bidet cover with nozzles, which is installed on a regular toilet. They are electronic - with heating elements, as well as conventional - with a mixer.

Types of toilet bowls with a bidet

There are several varieties of two-in-one shower toilets, distinguished by different criteria.

Mounting type:

Floor toilet. The traditional model, which is installed on the floor. It is easy to install, but takes up a lot of space.
Hanging toilet. The device is attached to the wall using a special installation. Withstands up to 400 kg of weight. Its advantages are compactness, simplification of the cleaning process, attractive appearance. The downside is the complexity of installation and repair, since all communications are “hidden” in the wall.

Example of a wall hung toilet

According to the method of heating water and controlling the nozzles:

Mechanical. The plumbing fixture is connected to a hot and cold water supply. Management is carried out manually. The device has minimum set functions.
Electronic. The device is equipped with an electric heater, thermostat, hair dryer, water pressure control systems and so on. Management is carried out using the buttons on the panel or remote control. The heater can work constantly or turn on at the time of use of the bidet.

By type of material:

Porcelain. They are characterized by reliability, hygiene (does not form) and high price.
Faience. They differ in porosity (dirt is absorbed into the surface), not very high strength, but are inexpensive.
From other materials (rare) - from steel, plastic, glass, stone, cast iron.

Other classifications of shower toilets:

in shape - classic and corner toilets;
by type of release into the sewerage system - with horizontal, vertical, oblique;
according to the shape of the flush - with a circular, with a straight line;
by the number of tanks - with one, with several.

Price range

The actual price of a shower toilet depends on the number of functions and the level of the manufacturer. Approximate range:

floor-mounted mechanical bidet VitrA Grand (Turkey) - 6350 rubles;
floor-mounted mechanical toilet-bidet Ideal Standard Connect (Belgium) - 18070 rubles;
suspended mechanical toilet-bidet Bien Harmony (Italy) with a microlift and noise insulation - 27910 rubles;
electronic hanging toilet Duravit DuraStyle (Germany) with a hairdryer and remote control - 128770 rubles;
electronic hanging toilet-bidet Toto Neorest EW (Japan) with a full range of functions - 421400 rubles.

Tip: It is better to buy a shower toilet in a specialized store. It is important to carefully inspect the device and check the warranty documentation.

Advantages and disadvantages

Consider the advantages and disadvantages of such a plumbing item as a toilet with a bidet function, and user reviews will help with this.

Advantages:

the possibility of taking an intimate shower;
the cost of an integrated device is lower than a toilet bowl and a bidet in total;
the function of water and / or air massage, which is especially useful for hemorrhoids and diseases of the genital organs;
saving on toilet paper (if you have a hair dryer);
maintaining the hygienic cleanliness of the toilet bowl due to the automatic use of a disinfectant solution;
convenient to use for both the elderly and people with handicapped;
some models make it possible to conduct therapeutic herbal baths and do enemas.

In addition, it should be borne in mind that a wall-hung toilet with a bidet function takes up little space, and also allows you to more thoroughly clean the space around.

Flaws:

high price of multifunctional electronic models;
complexity of installation and repair.

Connection Features

Fixing the shower toilet to the floor and/or wall and connecting it to the sewer are standard procedures. But there are some features associated with the supply of water to the nozzles.

The installation algorithm depends on how the water for ablution is heated. In the simplest mechanical models, only cold water is supplied. The connection is made by connecting a flexible hose to a tap installed on the pipe. The usability of such devices is questionable.

When manually adjusting the water temperature, the shower toilet is equipped with a mixer, one hose of which is connected to a pipe with cold water, and the other to hot. When using the bidet function, a person, using a lever or valves, selects a comfortable temperature for the supply water.

If the shower toilet is equipped heating element and a thermostat, then it should be connected to a pipe with cold water and to electrical network. In advance, you need to take into account the need for a separate branch of electrical wiring. In addition, you should take care of grounding and a residual current device. Safety standards cannot be ignored, since when using a bidet, a person comes into direct contact with the aquatic environment.

Toilets with a bidet function are plumbing devices that increase the hygiene of using the toilet. The variety of modern models allows you to choose a device that is suitable in style, functionality and price for different categories of consumers. The purchase of a shower toilet is most appropriate if there are elderly people in the house, as well as family members with disabilities or various diseases of the intimate organs.