The best Russian-made acrylic bathtubs

In recent years, Russia has been one of the leading countries in the production of sanitary ware. In addition, our designers have successfully proved to their foreign colleagues that they are able to successfully implement their personal ideas, combining creativity and a sense of style in them. Their developments in the field of sanitary equipment occupy leading positions at international exhibitions. They are also highly regarded by well-known manufacturers. At the moment, Russian baths can easily compete with well-known leaders.

In addition to high quality and decent design, our bathtubs are cheaper than foreign ones. This is due to the absence of considerable transportation costs and customs duties. Russian plumbing not only goes on a par with foreign counterparts, but also has a sufficient number of advantages over them. Let's stop on them now.

Modern production of bathtubs is extremely responsible for work, so there is no reason to doubt the high quality and reliability of products. In addition, modern technologies are rapidly developing, allowing not to step back in quality and other important characteristics from world manufacturers. Finished products not only meet all quality marks, but also have modern style solutions.

Domestic bathtubs are highly resistant to factors that can adversely affect the acrylic surface (sudden temperature changes, mechanical stress, etc.).

That is why one should get rid of such misconceptions, then domestic products are worse than foreign ones. Russian manufacturers cooperate productively with their foreign partners and share their experience. Our quality bathtubs meet all European requirements.

Domestic products have a lower cost, and their range is not inferior to foreign counterparts.

Russian-made acrylic bathtubs: rating

There are leading companies among Russian manufacturers. So among the cast-iron baths, two plants for their production stand out:

1. Kirovsky;
2. "Universal" from Novokuznetsk.

They provide a wide range of products to the market. Such baths have a long service life, high technical characteristics and modern design, thanks to which they will harmoniously blend with any interior.

Among the manufacturing plants that specialize in the production of acrylic bathtubs, Bas, 1Marka, Triton and others stand out in particular. These brands are known not only in the Russian Federation, but also in neighboring countries and the EU. High-quality products have a modern design and a wide selection. Such characteristics make it possible to compete with world brands.

Top 8 Acrylic Bathtub Manufacturers in Russia

1. Akrilan
2. aquanet
3. Aquatek
4. Radomir
5. Kirov Plant

Below is a brief description of the products of these firms.

1marka

This manufacturer of sanitary ware guarantees the use of 100% acrylic for the manufacture of bathtubs. At the same time, the thickness of the material itself is from 4 to 6 mm, which meets international standards.

Manufacturers who want to save on production usually use thinner and lower quality acrylic sheets. Finished products wear out quickly, and its surface is deformed at the slightest mechanical damage. As a result, plumbing loses its original appearance and in most cases cannot be restored.

With the company "1Marka" this is completely excluded. The manufacturer works, first of all, for high quality and reliability, which ensures its high popularity among buyers. In addition, he does not miss such trifles:

• All structural elements are zinc coated.
• There are additional fastening elements to give the structure the greatest strength and stability.
• The depth of the bath meets all the requirements for the convenience of consumers.

The bathtubs of this company are simply created to provide pleasure in the process of taking water procedures. At the request of the customer, the company can additionally mount in any model: a lighting system, aromatherapy, aero and hydromassage, and other functions that improve the level of comfort.

This company also specializes in the production of shower cabins and other sanitary equipment. All materials for the production of products are purchased in Europe.

Bas

Russian firms produce acrylic bathtubs that people with different income levels can afford. The Bas company is designed for the middle class. Its products meet the most stringent standards and parameters. For 15 years, high-quality products have been produced that have won the trust and respect of customers.

The range of sanitary products includes models equipped with air and hydromassage systems. The production itself takes place on modern Italian equipment under the guidance of experienced professionals. When creating bathtubs, only high-quality acrylic and multilayer polymer plastic are used. This combination was developed by a company from Austria to achieve high strength and reliability.

Polymer plastic is able not only to withstand high loads, but also to provide the structure with antibacterial protection. Thus, there is no need for daily cleaning of its inner surface. Bathtubs from this company have a reinforced bottom and a reinforced frame with plugs, this makes it possible to withstand heavy loads. And no less important fact is the release of compact models that harmoniously fit into a bathroom with a small area.

Akrilan

Almost from the very moment of its appearance, this company has won a leading position in the Russian market. Production capacity is regularly increased, as well as the expansion and improvement of products. Akrilan mainly produces shower cabins and bathtubs made of acrylic.

The company uses both European and its own developments. Their adaptation to their own production is very successful, providing high-quality products at the output. This is evidenced not only by a large number of reviews from grateful customers, but also by the award of a gold quality certificate from ROSTEST.

Thus, we can conclude that this company regularly studies the market for sanitary equipment, successfully introduces modern technologies and provides the Russian market with high-quality and durable products.

aquanet

This manufacturing company specializes in the production of bathtubs, bathroom furniture, as well as shower cabins. A wide range includes many models that differ not only in appearance, but also in size, equipment, and cost. Products are designed for different categories of customers.

To produce bathroom furniture, the company uses Finnish moisture-resistant materials such as chipboard and MDF. As an additional protection against high humidity, a primer layer acts, which also makes the surface of the furniture even and smooth.

The main criterion in the production process is the high quality of products. Therefore, staining takes place taking into account all European requirements and standards. For this, modern French equipment and paint from Italy are used.

Aquatek

The company was founded in 2001 and has proven itself well since then. At the moment, its active development is taking place with the condition of all modern technologies. Its main areas are the production of acrylic baths and showers, some models may include a hydromassage system.

The company also cares about its specialists. That is why they regularly improve their skills, gaining additional knowledge and experience. In the process of manufacturing products from Aquatek, materials and equipment from leading European manufacturers are used. Thanks to this, as well as a multi-level quality control system, the output is reliable and high-quality products.

In the process of manufacturing bathtubs and other plumbing elements, the necessary safety requirements are observed. In addition, the company has certificates confirming the high quality and compliance with European requirements.

Radomir

The Radomir company specializes in the production of hydromassage bathtubs, shower cabins, as well as acrylic bathtubs. The company has been on the market for more than 15 years and has successfully managed to gain a foothold thanks to the exemplary quality of its products. This is evidenced not only by its great popularity among consumers, but also by numerous certificates and diplomas.

According to the manufacturer, its products can be in operation for at least 20 years, which indicates its high strength. In addition, time-tested components and innovative technologies that have proven themselves in European countries are used for its production.

Whirlpool baths from this company are characterized by minimal noise and vibration. They also have extremely stable legs, which provide the structure with complete stability even on uneven surfaces. To ensure high quality, the company tests its products at all stages of its production.

Kirov Plant

This brand of sanitary equipment is widely known not only in Russia, but also abroad. And all thanks to the high quality of the produced cast iron bathtubs. This company has been known since 1945, during which time it has slightly changed its field of activity, but its main principles remain unchanged.

The plant in 2006 carried out a complete replacement of all its equipment. Now he uses modern German equipment and components.

It was the specialists of the Kirov Plant who invented and patented a technology that involves the production of enamel with silver ions. With its use, the hygienic characteristics of sanitary equipment are significantly improved. The plant's products have a fairly wide range, differing in shapes, parameters and accessories.

Triton

The brand has been known since 2002. Since the beginning of its foundation, products have been produced using the highest technologies. That is why the manufacturer is equipped with the latest high-quality equipment and produces sanitary equipment at a high level.

In the production process of acrylic baths, sheets of this material are used from the best suppliers. The process of their manufacture itself goes through more than one cycle in order to obtain ideal products without any defects at the output. The Triton company is equipped with exclusive equipment that is used to apply a reinforcing layer. This fact improves its competitiveness, and at the same time, the products produce products in different price segments.

What materials and sizes are used by domestic manufacturers of acrylic bathtubs

The most popular materials in the manufacture of bathtubs from domestic manufacturers are:

1. Cast iron bath. This material is good because it can retain heat for a long time and is not subject to corrosion. The product is heavy, but at the same time it is easy to install and eliminates vibration. Another advantage of the material is its long service life, such products can be used for more than 25 years. And modern equipment allows you to create models of various shapes and sizes.
2. Acrylic bath. These products are characterized by a long service life and minimal maintenance required. The material is able to retain heat for a long time and has a pleasant to the touch surface. Bathtubs are lightweight, which allows them to be installed independently. Another feature of the material is ease of care, it is easy to clean without extraneous detergents. The only negative is the instability to scratches and mechanical damage.
3. Steel bath. It is highly hygienic and heats up quickly. Light weight greatly simplifies its installation and allows you to do it yourself. The ductility of steel provides a variety of shapes and models of products, allowing you to choose the most optimal option for a particular case. Among the disadvantages: heat retention does not occur for a sufficiently long time and the noise from the water is more noticeable.

In terms of size, the most popular in Russia are the following parameters:

• 150*70 cm;
• 170*70 cm;
• 170*75 cm;
• 170*80 cm.

The range of bathtubs also has other sizes. Thus, you can choose the best option even for a small bathroom.

Additional features for Russian baths

Most manufacturers install a hydromassage system as additional functions. Most often it is found in acrylic bathtubs. In addition to hydro, there are models with air massage. Additional equipment is designed by firms independently and mounted in baths at the request of the buyer.

About joint ventures

Russian manufacturers can share their experience with foreign companies, so some companies produce and distribute their products not only in Russia, but also in other countries. Thus, there is a joint production of bathtubs, showers and other goods. There are also foreign companies that cooperate with domestic firms using our equipment and technologies.

An example is the firm "1Marka". In the baths she produces, she uses hydromassage equipment from an Italian company. Other Soviet bath manufacturers are also cooperating with Italy, including DoctorJet.

Victoria has its own production facility in China, which allows us to manufacture and supply a large number of sanitary wares.

Acrylic bathtubs: the most popular among Russians

The following companies are the deserved leaders in the production of Russian sanitary ware from acrylic:

• "1Marka";
• "Bas";
• "Triton";
• Radomir.

These firms have proven themselves well in the territory of the Russian Federation. And to maintain their leading position, they regularly improve their technologies and improve the quality of their products. Among the firms that specialize in the production of cast iron bathtubs, it is worth mentioning the Kirov Plant. It has kept its traditions for many decades. Special attention deserves and "Universal". This plant is located in Novokuznetsk.